河南东吉高科有限公司
安捷伦
| 5068-0350 | Sample Loop StS 2mL-0.0625in |
| 5068-0376 | Stator-5ps-7pt-PV-1300bar-MP35N |
| 5068-0377 | Rotor-7pt-PV-1300bar-MP35N |
| 5068-0378 | Stator-8ps-9pt-PV-1300bar-MP35N |
| 5068-0379 | Rotor_9-Port_PV_1300bar |
| 5069-4478 | Foreline pump Fluid (Fomblin 06/6) 2 kg |
| 5069-4496 | Membrane tube with female locking luer |
| 5080-4978 | O-rings; 0.070in id, 0.070in cd 12/PK |
| 5080-4982 | O-rings, 0905-0322 12/PK |
| 5080-5400 | Swabs 100/PK |
| 5080-8716 | Boiling Point Calibration Sample No 1 |
| 5080-8728-100 | Septa General Purpose Gray 3/8in, 100/Pk |
| 5080-8728-50 | Septa General Purpose Gray 3/8in 50/PK |
| 5080-8732 | Sleeves, packed inlet, 170ul vol, 25/PK |
| 5080-8750 | Fittings 1/8inch Brass 20/PK |
| 5080-8751 | Fittings, 1/8in stainless steel, 20/Pk |
| 5080-8752 | Fittings, 1/4in Brass, 20/Pk |
| 5080-8753 | Fittings, 1/4in stainless steel, 20/Pk |
| 5080-8773 | Ferrule, 1.0mm Graphite 0.53 col 10/PK |
| 5080-8774 | Ferl 1/4in VG SP-22 40pct graphite 10PK |
| 5080-8800 | Paper, Thermal-Rolls 4/BX |
| 5080-8846 | O-ring, greased 12/PK |
| 5080-8853 | Ferrule, 0.5mm Graphite 0.32 col 10/PK |
| 5080-8894-100 | Septa General Purpose Gray 11mm 100/PK |
| 5080-8895 | Septa, white 11mm 144/PK |
| 5080-8896-50 | Septa General Purpose Gray 11mm 50/pk |
| 5080-8898 | O-Ring 12/PK, Fluoroelastomer, 0.426inID |
| 51023-A | Bulb Guard w/ O-rings |
| 51555 | pH Electrode |
| 5180-0841 | Vial,HTS-HTC,crimp,RB,0.3ml,clr,500PK |
| 5180-0842 | 8mm Crimp Cap PTFE/Silicone sept 500/PK |
| 5180-0844 | Vial,HTS-HTC,crimp,TB,0.1ml,clr,500PK |
| 5180-4102 | Nut, 1/16in stainless steel, 10/Pk |
| 5180-4103 | Nut, 1/8in Brass, 10/Pk |
| 5180-4104 | Nut, 1/8in stainless steel, 10/Pk |
| 5180-4105 | Nut, 1/4in Brass, 10/Pk |
| 5180-4106 | Nut, 1/4in stainless steel, 10/Pk |
| 5180-4108 | Front ferrules, 1/16in SS, 10/Pk |
| 5180-4109 | Front ferrules, 1/8in Brass, 10/Pk |
| 5180-4110 | Front ferrules, 1/8in SS, 10/Pk |
| 5180-4111 | Front ferrules, 1/4in Brass, 10/Pk |
| 5180-4113 | Back ferrules 1/16in Brass 10/PK |
| 5180-4114 | Back ferrules, 1/16in SS, 10/Pk |
| 5180-4115 | Back ferrules, 1/8in Brass, 10/Pk |
| 5180-4116 | Back ferrules, 1/8in SS, 10/Pk |
| 5180-4117 | Back ferrules, 1/4in Brass, 10/Pk |
| 5180-4120 | Cap, 1/4in Brass, 6/Pk |
| 5180-4121 | Cap, 1/8inch Brass, 6/Pk |
| 5180-4124 | Plug, 1/8in Brass 6/PK |
| 5180-4125 | Plug, 1/4in Brass 6/PK |
| 5180-4127 | Union, 1/8in Brass 2/PK |
| 5180-4128 | Union, 1/4in Brass 2/PK |
| 5180-4129 | Tee, 1/4in Brass 2/PK |
| 5180-4130 | Reducer, Union, 1/8 x 1/16 Brass 2/PK |
| 5180-4131 | Reducer, Union, 1/4 x 1/8 Brass 2/PK |
| 5180-4134 | Reducer, 1/4 x 1/8 Brass 2/PK |
| 5180-4135 | Reducer, 1/8 x 1/4 Brass 2/PK |
| 5180-4143 | Connector, 1/8 x 1/4 Brass Male NPT 2/PK |
| 5180-4145 | Connector, 1/4 x 1/4 Brass Male NPT 2/PK |
| 5180-4148 | Connector, 1/16in Hose 10/PK |
| 5180-4149 | Fitting kit 10/PK |
| 5180-4150 | Cleaning wires for .016in id jet 5/PK |
| 5180-4152 | Cleaning Wires 0.010in id/530um jet 5/PK |
| 5180-4153 | Capillary inlet cleaning wires 5/PK |
| 5180-4160 | Tee, 1/8inch Brass Union 2/PK |
| 5180-4161 | Fitting Kit |
| 5180-4162 | General laboratory tool kit |
| 5180-4165 | Silcone Gskets 0.890inod/0.709inid 12/Pk |
| 5180-4168 | Graphite O-ring, 5700/5840/6890 10/PK |
| 5180-4173 | Graphite O-ring for splitless, 10/pk |
| 5180-4181 | Size 2-006 O-Ring, Fluorocarbon, 12/PK |
| 5180-4196 | 1/8in x .065in Copper Tubing,50 Ft Coil |
| 5181-1210 | 11mm slvr al crmp cap redPTFE spta 100pk |
| 5181-1211 | 11mm crimp cap, PTFE/S/PTFE septa 100/PK |
| 5181-1212 | Crimp caps 11mm/black Viton septa 100/PK |
| 5181-1215 | Blue crmp cap 11mm, FEP/Rub septa 100/PK |
| 5181-1216 | Green crimp cap 11mm, FEP/R septa 100/PK |
| 5181-1217 | Red crimp cap 11mm PTFE/rub septa 100pk |
| 5181-1219 | Perforated paper, 8.5in x 11in rolls ttt |
| 5181-1220 | Ink Cartridge |
| 5181-1255 | Paper, A-4 Inkjet, 339x, EU, 4 Rolls/PK |
| 5181-1257 | Small Truarc Clip 10/PK |
| 5181-1260 | Septa thru hole 5mm 25/PK |
| 5181-1261 | Septa high backpressure 5mm 25/PK |
| 5181-1267 | Syringe, 10ul tapered, FN 23-26s/42/HP |
| 5181-1267-HF | Syringe, 10uL FN 23-26s/42/HP High Flow |
| 5181-1270 | 250 ul Inserts with Polymer Feet,100/pk |
| 5181-1273 | Syringe, 5ul tapered, FN 23-26s/42/HP |
| 5181-1283-100 | Septa General Purpose Red 3/8in, 100/Pk |
| 5181-1283-50 | Septa General Purpose Red 3/8in 50/PK |
| 5181-1291 | Nut, 1/16in stainless steel Valco, 10/Pk |
| 5181-1292 | Ferrule, 1/16in Valco, one pc SS, 10/pk |
| 5181-1507 | Snap caps, polyethylene olefin, 100/PK |
| 5181-1512 | Snap caps, polyurethane 100/PK |
| 5181-1513 | Snap caps, polyethylene olefin, 500/PK |
| 5181-3308 | Ferrule VG-1 no hole for MS 10/PK |
| 5181-3315 | Liner,splitless,dbl-tpr,no glswl,deacted |
| 5181-3316 | Liner,splitls,sngl-taper,no glswl,deact |
| 5181-3316I | Inert Liner, splitless, single taper |
| 5181-3317 | Glass wool pesticide, 10gm |
| 5181-3319 | Needles Replacement 10ul 23/26 ga. 3/PK |
| 5181-3321 | Syringe, 10ul tapered, RN, 23/26s/42/HP |
| 5181-3322 | Ferrule, 0.4mm Vespel 0.1-0.25 col 10/PK |
| 5181-3323 | Ferrule, 0.4mm VG 0.1-0.25 col 10/PK |
| 5181-3351 | Trap, particle 2.5m, 0.32mm |
| 5181-3352 | Trap, particle 2.5m, 0.53mm |
| 5181-3354 | Syringe, 10ul 23/26 ga, GT, FN, Taper |
| 5181-3354-HF | Syringe 10uL 23-26s/42/HP PTFE High Flow |
| 5181-3356 | Syringe 10ul, RN, GT, 23/26ga. |
| 5181-3358 | Plunger replacement, 10ul syringe |
| 5181-3360 | Syr. 10ul tapered, FN 23-26s/42/HP, 6/PK |
| 5181-3360-HF | Syr 10uL FN 23-26s/42/HP High Flow 6PK |
| 5181-3361 | Syringe 10ul T/FN/PTFE tip 23-26s/42/HP |
| 5181-3361-HF | Syr 10uL 23-26s/42/HP PTFE High Flow 6PK |
| 5181-3365 | Plunger 10ul, FN, GT,23/26 ga PTFE Tip |
| 5181-3375 | Vial,crimp,2ml,clr,cert,100PK |
| 5181-3376 | Vial,crimp,2ml,ambr,WrtOn,cert,100PK |
| 5181-3377 | 400ul flat bottom glass insert, 500/pk |
| 5181-3382 | Sleeves, 170ul vol, deact 5/PK |
| 5181-3383-100 | Septa, Partial Thru hole Red 11mm 100/PK |
| 5181-3383-50 | Septa , Partial Thru hole Red 11mm 50/PK |
| 5181-3388 | Ferrule, 0.3mm VG 2hole 0.1 col 10/PK |
| 5181-3394 | Plastic fitting 10/PK |
| 5181-3400 | 2ml Crimp vial, cap, Septa PTFE/R 500/PK |
| 5181-7442 | 0.25mm cool-on-column needles 3/pk |
| 5181-8801 | 2ml vial amber and 11mm cap kit 500/bx |
| 5181-8806 | Syringe 10ul fit pl, strght RN 23/42/HP |
| 5181-8809 | Syringe, 10ul FN PTFE tip 23/42/HP |
| 5181-8810 | Syr. 5ul tapered, FN 23-26s/42/HP, 6/PK |
| 5181-8811 | Needle 10ul, GT, 23ga., pt.HP 3/PK |
| 5181-8813 | Syringe 10ul, RN, GT, 23ga. |
| 5181-8815 | Microseal Septum, low pressure |
| 5181-8816 | Microseal kit, low pressure |
| 5181-8818 | Liner, direct, 2mm ID, deactivated |
| 5181-8827 | Decapper, 8mm vial caps |
| 5181-8830 | Column nut, universal 2/PK |
| 5181-8833 | Microseal Kit low pressure w/ 2 septa |
| 5181-8836 | Capillary tubing cutter, 4/PK |
| 5181-8838 | Split/Splitless |
| 5181-8839 | Microseal High Volume Septum Kit |
| 5181-8866 | Plunger button, syringe 10/PK |
| 5181-8872 | 250ul glass inserts, deactivated 100/PK |
| 5182-0540 | Clear PE Snap Cap w/ PTFE Septa 100/pk |
| 5182-0541 | Cap, snap, blue, PTFE/sil septa, 100/pk |
| 5182-0542 | Snap cap 11mm 100/PK |
| 5182-0543 | Vial,crimp,2ml,clr,WrtOn,cert,100PK |
| 5182-0544 | Vial,snap,2ml,clear,100PK |
| 5182-0545 | Vial,snap,2ml,ambr,WrtOn,100PK |
| 5182-0546 | Vial,snap,2ml,clr,WrtOn,100PK |
| 5182-0547 | 2ml vial crimp/snap with snapcaps 500pk |
| 5182-0548 | Amber vial snap cap w PTFE/rubber 500/pk |
| 5182-0549 | 250ul insert, polypropylene 100/PK |
| 5182-0550 | Snap cap with red silicone septa 100/PK |
| 5182-0551 | 4ml wash/waste vial 25/PK |
| 5182-0552 | Crimp cap 11mm, Septa PTFE/S 100/PK |
| 5182-0553 | Screw cap and clear vial kit 100/PK |
| 5182-0554 | AsmKit AmbWrtVial GrCap PTFE/redSi 100pk |
| 5182-0555 | Screw caps, blue, and vial kit 100/PK |
| 5182-0556 | AsmKit AmbWrtVial Grn PTFE/Si/PTFE 100pk |
| 5182-0557 | Screw caps, and clear vial kit 100/PK |
| 5182-0558 | AsmKit AmbWrt Vial GrnCap PTFE/Si 100/pk |
| 5182-0564 | Clr cap w/PTFE/red si rubber septa,500pk |
| 5182-0565 | Blue Box |
| 5182-0566 | Snap caps 100/PK |
| 5182-0567 | Vial,crimp/snap,1mL,PP,100PK |
| 5182-0570 | O-ring 6/PK |
| 5182-0575 | Vial storage container |
| 5182-0714 | Vial,screw,2ml,clr,cert,100PK |
| 5182-0715 | Vial,screw,2ml,clr,WrtOn,cert,100PK |
| 5182-0716 | Vial,screw,2ml,ambr,WrtOn,cert,100PK |
| 5182-0717 | Blue screw caps 100/PK |
| 5182-0718 | Screw cap green 100/PK |
| 5182-0719 | Screw cap red 100/PK |
| 5182-0720 | Caps, screw type, blue 100/PK |
| 5182-0721 | Screw caps, green 100/PK |
| 5182-0722 | Screw caps, red, 100/PK |
| 5182-0723 | Caps, screw type, color blue, 100/PK |
| 5182-0724 | Caps, screw type, green, 100/PK |
| 5182-0725 | Screw caps, color: red, 100/PK |
| 5182-0726 | Red screw caps 100/PK |
| 5182-0727 | Green color screw caps 100/PK |
| 5182-0728 | Blue color screw caps 100/PK |
| 5182-0729 | Screw cap septa, 100/pk |
| 5182-0730 | Septa, PTFE/white silicone, 8.7mm 100/pk |
| 5182-0731 | Septa, PTFE/red silicone, 8.7mm 100/pk |
| 5182-0732 | Screw vials,bl caps,PTFE/red spta,500pk |
| 5182-0733 | Screw top 2ml vials, green caps, 500/pk |
| 5182-0734 | Screw Cap Vial And Septa Kit 500EA |
| 5182-0735 | Screw Cap Vial + Septa Kit, Amber 500EA |
| 5182-0736 | Screw Cap Vial, Cap + Septa Kit 500EA |
| 5182-0737 | Screw Cap Vial, Cap/Septa Kit 500EA |
| 5182-0830 | Needle, 5ul, RN, 23 ga, pt.HP 3/PK |
| 5182-0831 | Needle 0.32mm on-column/5ul syringe 3/PK |
| 5182-0832 | Needles Rplcmnt Taperd 23-26s/42/HP 3/PK |
| 5182-0833 | Needle 0.25mm on-column/5ul syringe 3/PK |
| 5182-0834 | Syringe, 5ul, RN, 23 ga. pt.HP |
| 5182-0835 | Syringe, 5ul tapered, RN, 23-26s/42/HP |
| 5182-0836 | Syringe, 5ul on-column RN, barrel only |
| 5182-0837 | Vial,HS,crimp,FB,20ml,clr,cert,100PK |
| 5182-0838 | Vial,HS,crimp,FB,10ml,clr,cert,100PK |