河南东吉高科有限公司
安捷伦
| 8003-0503 | Barb fitting female CTFE neb sample line |
| 8003-0504 | Sample capillary, PTFE 0.020in id, neb. |
| 8003-0505 | PFA-ST PTFE nebulizer, ultra clean |
| 8003-0506 | CTFE union for PFA-ST nebulizer |
| 8003-0507 | PFA-ST3 microflow PTFE nebulizer |
| 8003-0508 | Obstruction removal kit for PFA nebs |
| 8003-0509 | PTFE sample capillary, ST neb, 1.0mm ID |
| 8003-0510 | PTFE sample capillary, ST neb, 0.5mm ID |
| 8003-0511 | PFA-Platinum sample intro kit, NexION |
| 8003-0512 | PFA-Sapphire sample intro kit, NexION |
| 8003-0513 | HF sample introduction kit for NexION |
| 8003-0514 | S/chamber glass baffle+ball joint NexION |
| 8003-0515 | S/chamber glass baffle+ball joint Elan |
| 8003-0516 | O-ring, baffled glass cyclonic s/chamber |
| 8003-0517 | S/chamber hi-purity quartz, O-ring free |
| 8003-0518 | S/chamber glass, O-ring free, NexION |
| 8003-0519 | S/chamber glass baffle+aux gas port Elan |
| 8003-0520 | S/chamber glass cycl., O-ring free, Elan |
| 8003-0521 | S/chamber glass, H2O-cooled+O-ring-free |
| 8003-0522 | Ryton Spray Chamber Kit |
| 8003-0523 | Large O-ring for Scott spray chamber |
| 8003-0524 | Retaining ring for Scott spray chamber |
| 8003-0530 | Injector, inert alumina 2.0mm ID, ICP-MS |
| 8003-0531 | Injector, inert alumina 1.5mm ID, ICP-MS |
| 8003-0532 | Injector, inert alumina 0.85mm ID ICP-MS |
| 8003-0533 | Injector, quartz b/joint 2.0mm id ICP-MS |
| 8003-0534 | Injector, quartz b/joint 1.5mm id ICP-MS |
| 8003-0535 | Injector quartz b/joint 0.85mm id ICP-MS |
| 8003-0536 | Inj support adapter, b/joint twist-type |
| 8003-0537 | Inj support adapter, b/j+cassette torch |
| 8003-0538 | Injector sapphire 2.0mm id ICP-MS HF kit |
| 8003-0539 | Injector PFA/Quartz twist-type 1.5mm id |
| 8003-0540 | Injector, PFA/Quartz cassette 1.5mm id |
| 8003-0541 | Inj. PFA/Sapphire twist-type, 1.8mm id |
| 8003-0542 | Inj PFA/Sapphire cassette torch 1.8mm id |
| 8003-0543 | Inj. PFA/Platinum twist-type, 2.0mm id |
| 8003-0544 | Inj PFA/Platinum cassette torch 2.0mm id |
| 8003-0545 | Inj. support adapter, twist-type torch |
| 8003-0546 | Inj support adapter twist-type w/O-rings |
| 8003-0547 | O-ring kit, injector support adapter |
| 8003-0548 | Inj support adaptr cass torch no b/joint |
| 8003-0550 | Inj Suppt Adapt O-Rings, Ext (Lrg) Cass. |
| 8003-0551 | O-ring, Inj Suppt Adapt, Int Twist/Cass. |
| 8003-0552 | Torch, demountable, quartz for PE ICP-MS |
| 8003-0553 | Torch, high eff demountable, PE ICP-MS |
| 8003-0554 | PFA/Pt cass-type Torch Inj, 2.0mm ID |
| 8003-0555 | Twist-Type Torch Inj Support Adapter |
| 8003-0556 | Cassette Torch Mount (excl torch & inj) |
| 8003-0559 | RF load coil assembly for PE ICP-MS, 1/p |
| 8003-0560 | Power amplifier tube (ceramic) PE ICP-MS |
| 8003-0561 | Detector, SimulScan dual-stage, NexION |
| 8003-0562 | Detector, SimulScan dual-stage, Original |
| 8003-0563 | Detector, SimulScan dual-stage, Improved |
| 8003-0564 | Ion Lens Series II, ELAN 9000/6×00/DRCs |
| 8003-0566 | Cassette lens shadow stop |
| 8003-0567 | Vacuum pump fluid for Leybold rough pump |
| 8003-0569 | Vacuum pump fluid, Fomblin (PFPE) GV80 |
| 8003-0571 | Ni sampler cone for NexION ICP-MS, 1/p |
| 8003-0572 | Ni skimmer cone for NexION ICP-MS, 1/p |
| 8003-0573 | Ni sampler cone for ELAN 9000/6×00/DRC |
| 8003-0574 | Ni skimmer cone for ELAN 9000/6×00/DRC |
| 8003-0575 | Pt sampler cone for NexION ICP-MS, 1/p |
| 8003-0576 | Pt skimmer cone for NexION ICP-MS, 1/p |
| 8003-0577 | Pt sampler cone for ELAN 9000/6×00/DRC |
| 8003-0578 | Pt skimmer cone for ELAN 9000/6×00/DRC |
| 8003-0579 | Hyper skimmer cone, NexION ICP-MS, 1/p |
| 8003-0580 | O-ring for hyper skimmer cone, PE NexION |
| 8003-0581 | Screw for hyper skimmer cone, PE NexION |
| 8003-0582 | O-rings sampler cone, Elan 9000/6×00/DRC |
| 8003-0583 | O-rings skimmer cone, Elan 9000/6×00/DRC |
| 8003-0584 | Aluminium gasket for NexION sampler cone |
| 8003-0585 | Cone removal tool for NexION ICP-MS |
| 8003-0586 | Cone removal tool for Elan 9000/6×00/DRC |
| 8003-0588 | Mounting for Cyclonic Spray Chamber |
| 8003-0589 | MicroMist neb (glass) U-series 0.2mL/min |
| 8003-0590 | Injector, quartz, 2.0mm ID, ELAN ICP-MS |
| 8003-0591 | Oring for type II torch |
| 8003-0592 | Ferrule, Front. 1⁄4 in |
| 8003-0594 | Tube Fitting |
| 8003-0595 | Peri pump tube PVC grn/yellow flared 6/p |
| 8003-0598 | Connector+nipples, f/1.7to3.2mm ID tubes |
| 8003-0605 | Tube Fitting |
| 8003-0614 | S/chamber quartz baffle+b/joint NexION |
| 8003-0615 | AS flame a/s probe assy, 0.6mm id s/less |
| 8003-0616 | AS FIAS a/s probe assy, 0.6mm id s/less |
| 8003-0617 | AS FIAS a/s probe assy, 1.0mm id s/less |
| 8003-0618 | AS sampling probe, stainless + screw fit |
| 8003-0619 | Capillary tubing s/s probe 0.6mm ID flam |
| 8003-0620 | Capillary tubing s/s probe 0.6mm ID FIAS |
| 8003-0621 | FIAS Capil Tbng assy 1m x 1mm+2 fittngs |
| 8003-0622 | Flame samp probe asy, FEP tube 0.6 mm ID |
| 8003-0623 | FIAS samp probe assy, FEP tube 0.6 mm ID |
| 8003-0624 | FIAS samp probe assy,FEP tube, 1.0 mm ID |
| 8003-0625 | Probe: FEP Tube, 0.6mmID & Screw Fittng |
| 8003-0627 | Probe: FEP Tube, 1.0mmID & Screw Fitting |
| 8003-0629 | Cleaning wire for PE autosampler probe |
| 8003-0645 | Pump tubes AS-93/S10 rinse 2.79mm id 6/p |
| 8003-0646 | Pump tubes AS-93/S10 rinse 1.14mm id 6/p |
| 8003-0653 | Nipple, 1.8 mm OD |
| 8003-0654 | 3.3 mm o.d. nipple |
| 8003-0655 | 4 mm o.d. nipple |
| 8003-0656 | Nipple for the quartz cell |
| 8003-0657 | 0.7 mm o.d. Pt/lr capillary nipple |
| 8003-0658 | Nipples- connect tubes to preconcen acc. |
| 8003-0659 | Connector for 2.4 to 3.2mm ID tubes |
| 8003-0660 | Connector with 1⁄4 in. int. screw thread |
| 8003-0661 | T-piece w/nipples, 1.5 to 2.5mm ID tubes |
| 8003-0662 | T-piece w/nipples, 3.5 to 4.5mm ID tubes |
| 8003-0663 | Adapter 1⁄4in Ext Thread 1.8mm OD nipple |
| 8003-0664 | Adapter 1⁄4in Ext Thread 2.8mm OD nipple |
| 8003-0665 | Adapter, 1⁄4in ext. thread 4mm OD nipple |
| 8003-0666 | Adaptr 1⁄4in Ext Thrd f/Pt-lr cap nipple |
| 8003-0667 | Screw Plug |
| 8003-0668 | Complete modular Mixing/Separation assy |
| 8003-0669 | Modular building-block-type mix manifold |
| 8003-0670 | Gas/Liquid Separator |
| 8003-0671 | Gas/liquid separator glass, PE FIMS/FIAS |
| 8003-0672 | Gas/Liquid Separator Holder |
| 8003-0673 | PTFE Membrane 50pk |
| 8003-0674 | Mixng Manifold f/Glass Gas/Liq Separator |
| 8003-0675 | Tool, for Screw Connectors |
| 8003-0679 | Sample Loop, 200 uL |
| 8003-0680 | Sample Loop, 500 uL |
| 8003-0681 | Sample Loop, 1,000 uL |
| 8003-0682 | Peri-Pump Tubing, 3-Stop 0.76mm BLK/BLK |
| 8003-0683 | Peri-Pump Tubing, 3-Stop 1.14 mm RED/RED |
| 8003-0684 | Peri-Pump Tubing, 3-Stop 1.52 mm YEL/BLU |
| 8003-0685 | Peri-Pump Tubing,3-Stop 2.06mm VIO/VIO |
| 8003-0686 | Peri-Pump Tubing,3-Stop 3.18mm BLK/WHT |
| 8003-0687 | Peri-Pump Tbg, f/Solv,3-Stop, 1.14mm W/W |
| 8003-0688 | Tubing, PTFE, 0.35 mm ID, 1 m |
| 8003-0689 | Tubing, PTFE, 0.5 mm ID, 1 m |
| 8003-0690 | Tubing, PTFE, 0.7 mm ID, 1 m |
| 8003-0691 | Tubing assy, PTFE, 0.35mm ID, 60mm, WHT |
| 8003-0692 | Tubing assy, PTFE, 1.0mm ID, 110mm, BLU |
| 8003-0693 | Tubing assy, PTFE, 1.0mm ID, 300mm, BLU |
| 8003-0694 | Tubing assy, PTFE, 1.0mm ID, 700mm, BLU |
| 8003-0695 | Tubing assy, PTFE, 1.75mm ID, 250mm, BLK |
| 8003-0696 | Tubing assy, PTFE, 1.75mm ID, 450mm, BLK |
| 8003-0697 | Reactor, 3-D 0.35 mm ID, 2-flanged ends |
| 8003-0698 | Tubing, silicone, 5mm IDx1m, no fittings |
| 8003-0699 | Tubing, silicone, 3mm ID x 1m, Amal Sys |
| 8003-0700 | Tubing silicone, FIMS cell exhaust, 1m |
| 8003-0712 | Aluminum-Al, 50mm coded HC Lamp, PE AA |
| 8003-0713 | Antimony-Sb, 50mm coded HC Lamp, PE AA |
| 8003-0714 | Arsenic-As, 50mm coded HC Lamp, PE AA |
| 8003-0715 | Barium-Ba, 50mm coded HC Lamp, PE AA |
| 8003-0716 | Beryllium-Be, 50mm coded HC Lamp, PE AA |
| 8003-0817 | Multimode Sample Intro System for PE ICP |
| 8003-0818 | Capil assy f/Corrosion-Resistant Nebulzr |
| 8003-0819 | Nebulizer assembly, corrosion-resistant |
| 8003-0820 | End cap assy, metal body neb PE AAnalyst |
| 8003-0822 | Stainless steel Nebulizer Assembly |
| 8003-0823 | Spring for metal body nebulizer assembly |
| 8003-0824 | O-Ring 0.208 ID x 0.070 WD f/SS Neb assy |
| 8003-0825 | O-Ring 0.176 ID x 0.070 WD f/SS Neb assy |
| 8003-0826 | O-Ring Kit for Nebulizer assy |
| 8003-0827 | Capillary assembly for SS Nebulizer |
| 8003-0828 | Nebulizer assy, SS, f/PinAAcle |
| 8003-0830 | Spring, for GemTip nebulizer – Aanalyst |
| 8003-0831 | Nebulizer assy, High-Sensitiv. GemTip |
| 8003-0832 | Universal GemTip Nebulizer Assembly |
| 8003-0833 | Spring, Hi-Sens. Nebulizer w/Pt-Ir Capil |
| 8003-0834 | O-Ring, Hi-Sens. Nebulizer w/Pt/Ir Capil |
| 8003-0835 | O-Ring, Hi-Sens. Nebulizer w/Ta Capilary |
| 8003-0836 | Hi-Sens. Nebulizer with Pt/Ir Capillary |
| 8003-0837 | Nebulizer kit, for AAnalyst |
| 8003-0838 | End Cap Latch Assy for PinAAcle 900 |
| 8003-0840 | Clamping Ring for burner system |
| 8003-0841 | Flow Spoiler clamping ring |
| 8003-0842 | End Cap O-Ring 0.312 x 0.070 in |
| 8003-0843 | End Cap Viton O-Ring Standard |
| 8003-0844 | End Cap O-Ring, Kalrez, Organics/Aqueous |
| 8003-0845 | End cap assy, f/metal body nebs-PinAAcle |
| 8003-0847 | End cap assy, plastic body neb, PinAAcle |
| 8003-0848 | End cap assy, plastic body neb, AAnalyst |
| 8003-0849 | O-ring, burner head, 0.984 x 0.139 in |
| 8003-0850 | Drain Tubing – Tygon Tubing FEP lined |
| 8003-0851 | Seal plug f/impact bead & end cap assy |
| 8003-0852 | O-Ring, 1⁄4 in ID,f/end cap asy 00570984 |
| 8003-0853 | O-Ring 1⁄8 in ID, Seal plug in end cap |
| 8003-0854 | Burner Drain assy Orgs-AAnalyst1/2/3/400 |
| 8003-0855 | Burner Drain assy Organics-AAnalyst7/800 |
| 8003-0856 | Burner Drain assy – AAnalyst 700/800 |
| 8003-0857 | Bnr Drain assy PinAAcle+AAnalyst 100-400 |
| 8003-0858 | Burner Head Cleaning Tool |
| 8003-0860 | Impact Bead f/Hi-Sens Neb w/Pt-Ir Capil |
| 8003-0861 | O-Ring f/Hi-Sens Neb w/Pt-Ir Capil-PinAA |
| 8003-0862 | O-Ring f/Hi-Sens Neb w/Pt-Ir Capillary |
| 8003-0863 | O-Ring f/Hi-Sens Neb w/Pt-Ir Capil-AAnal |
| 8003-0864 | Capillary assy, metal body neb for PE AA |
| 8003-0865 | Spring f/Hi-Sens Neb w/Pt-Ir Capil. |
| 8003-0888 | Bismuth-Bi, 50mm coded HC Lamp, PE AA |
| 8003-0889 | Boron-B, 50mm coded HC Lamp, PE AA |
| 8003-0890 | Cadmium-Cd, 50mm coded HC Lamp, PE AA |
| 8003-0891 | Calcium-Ca, 50mm coded HC Lamp, PE AA |
| 8003-0892 | Chromium-Cr, 50mm coded HC Lamp, PE AA |
| 8003-0893 | Cobalt-Co, 50mm coded HC Lamp, PE AA |
| 8003-0894 | Copper-Cu, 50mm coded HC Lamp, PE AA |
| 8003-0897 | Europium-Eu, 50mm coded HC Lamp, PE AA |