河南东吉高科有限公司
备件
| 534660.901 | UPP Flowmeter |
| 534855.901 | HRx0, DHR Rheo-Impedance Spectroscopy Accessory parallel plateNote: Requires Advanced Peltier Plate (P/N 533209.901) and LCR Meter. |
| 534900.901 | HR x0, DHR Glovebox Feedthrough KitNote 1: For use with DHR and HR x0 models.Note 2: If the glovebox kit is offered as accessory for an existing HR or DHR, part number 999800.529 covering for the installation of the existing HR/DHR in a glovebox must be included in the quote. |
| 543033.001 | Asphalt Cylindrical Torsion End Pieces |
| 543097.911 | ETC Melt Rings for 25 mm Lower Stepped ETC Plate (pkg. of 50) |
| 543311.901 | HR x0, DHR & AR-Series ETC Flow Meter Kit |
| 543312.901 | HR x0, DHR & AR-Series Low Temperature Fittings without LN2 Dewar |
| 543313.901 | HR x0, DHR & AR-Series Low Temperature Fittings with LN2 Dewar |
| 543406.901 | DHR & AR-G2 ETC Parallel Plate Accessory KitNote: Includes 25 mm stainless steel parallel plates.All other geometries purchased separately. |
| 543407.901 | DHR & AR-G2 ETC Torsion Clamp Accessory KitNote: Includes clamps for rectangular solid samples.Maximum Sample Size: Length = 50 mm, Width = 13 mm, Thickness = 5 mm. |
| 543408.901 | DHR & AR-G2 ETC Disposable Parallel Plate Accessory Kit |
| 543409.901 | DHR & AR-G2 ETC Pressure Sensitive Adhesives Accessory KitNote: Includes 8 and 25 mm stainless steel parallel plates.All other geometries purchased separately. |
| 543410.901 | DHR & AR-G2 ETC Asphalt Parallel Plate Accessory KitNote: Includes 8 and 25 mm stainless steel parallel plates and siliconeasphalt molds. |
| 543601.901 | DHR & AR-G2, Stainless Steel, 8 mm ETC PlateNote: For use with P/N: 527080.904 – Stainless Steel, 8 mm Stepped Lower ETC Plate. |
| 543602.901 | DHR & AR-G2, Stainless Steel, 4 mm ETC PlateNote: For use with P/N: 527040.904 – Stainless Steel, 4 mm Stepped Lower ETC Plate. |
| 543606.901 | DHR & AR-G2, Stainless Steel, 25 mm ETC PlateNote: For use with P/N: 527250.904 – Stainless Steel, 25 mm Stepped Lower ETC Plate. |
| 543611.901 | DHR & AR-G2, Stainless Steel, 40 mm ETC PlateNote: For use with P/N: 527400.903 – Stainless Steel, 40 mm ETC Plate. |
| 543640.901 | DHR & AR-G2, Stainless Steel, 8 mm Cross Hatched ETC PlateNote: For use with P/N: 527080.906 – Stainless Steel, Cross Hatched, 8 mm Stepped Lower ETC Plate. |
| 543641.901 | DHR & AR-G2, Stainless Steel, 25 mm Cross Hatched ETC PlateNote: For use with P/N: 527250.906 – Stainless Steel, Cross Hatched, 25 mm Stepped Lower ETC Plate. |
| 543642.901 | DHR & AR-G2, Stainless Steel, 40 mm Cross Hatched ETC PlateNote: For use with P/N: 527400.905 – Stainless Steel, Cross Hatched 40 mm ETC Plate. |
| 543651.901 | DHR & AR-G2, Stainless Steel, 25 mm, 0.1 rad, ETC ConeNote: For use with P/N: 527250.904 – Stainless Steel, 25 mm Stepped Lower ETC Plate. |
| 543652.901 | DHR & AR-G2, Stainless Steel, 25 mm, 0.04 rad, ETC ConeNote: For use with P/N: 527250.904 – Stainless Steel, 25 mm Stepped Lower ETC Plate. |
| 543661.901 | DHR & AR-G2, Stainless Steel, 25 mm, 2 deg, ETC ConeNote: For use with P/N: 527250.904 – Stainless Steel, 25 mm Stepped Lower ETC Plate. |
| 543662.901 | DHR & AR-G2, Stainless Steel, 25 mm, 4 deg, ETC ConeNote: For use with P/N: 527250.904 – Stainless Steel, 25 mm Stepped Lower ETC Plate. |
| 543671.901 | DHR & AR-G2, Stainless Steel, 40 mm, 2 deg, ETC ConeNote: For use with P/N: 527400.903 – Stainless Steel, 40 mm ETC Plate. |
| 543672.901 | DHR & AR-G2, Stainless Steel, 40 mm, 4 deg, ETC ConeNote: For use with P/N: 527400.903 – Stainless Steel, 40 mm ETC Plate. |
| 543681.901 | DHR & AR-G2, Stainless Steel, Upper ETC Smart Swap Torsion Geometry |
| 543682.901 | DHR & AR-G2, Smart Swap, Upper Disposable Plate Shaft for ETC |
| 545043.901 | DHR & AG-G2, Stainless Steel, Conical Rotor, Rad = 7.5 mmNote 1: Appropriate for measurements of crumb-rubber modified asphalt.Note 2: For use with DHR & AR-G2 only. |
| 545050.901 | Disposable Concentric Cylinder KitNote: For Peltier and Electrically Heated Jackets. |
| 545056.901 | Combined Air Chiller Panel Upgrade KitNote: For use with DMA 850/Q800 Air Chiller Panel (P/N: 986400.901), to add functionality for use with a HR x0, DHR ETC. |
| 545075.901 | Disposable Concentric Cylinder Cups (pkg. of 20) |
| 545201.901 | HR 30, HR 20, DHR Extensional Viscosity Accessory (EVA) |
| 545430.901 | Stainless Steel Peltier Plate Cover |
| 545431.901 | Stainless Steel Peltier Plate Cover, Raised Center, 20 mm |
| 545433.901 | Stainless Steel Peltier Plate Cover, Raised Center, 60 mm |
| 545435.901 | Titanium Peltier Plate Cover, Raised Center, 40 mm |
| 545609.901 | Peltier Concentric Cylinder Solvent TrapNote: NOT for use with Double Wall Concentric Cylinder System. |
| 545610.901 | HA Aluminum Grooved Concentric Cylinder CupNote: For HR x0, DHR & AR-Series Peltier Jacket. |
| 545612.901 | Ver 1 HA Aluminum Double Gap Concentric Cylinder Cup,Inner Rad = 20.00 mm, Outer Rad = 22.38 mmNote: For HR x0, DHR & AR-Series Peltier Jacket. |
| 545613.901 | Ver 1 Stainless Steel Double Gap Concentric Cylinder Cup,Inner Rad = 20.00 mm, Outer Rad = 22.38 mmNote: For HR x0, DHR & AR-Series Peltier Jacket. |
| 545615.901 | HA Aluminum Large Diameter Concentric Cylinder Cup (Rad = 22 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. |
| 545618.901 | HR x0, DHR & AR-Series Smart Swap Torsion Immersion KitNote: Requires Peltier Fluid Jacket – P/N: 533201.901. |
| 545626.001 | Split CoverNote: For HR x0, DHR & AR-Series Smart Swap Peltier Concentric Cylinders. |
| 545630.902 | HR x0, DHR Electro-Rheology, Stainless Steel Concentric Cylinders Cup,30 mm diameter |
| 545642.001 | Stainless Steel Blank PlugNote: For HR x0, DHR & AR-Series Peltier Jacket Double Gap Cup. |
| 545666.901 | HA Aluminum Starch Rotor Concentric Cylinder Cup (Rad = 18.5 mm)Note: For HR x0, DHR & AR-Series Peltier Jacket. |
| 545696.901 | Stainless Steel Standard Concentric Cylinder Cup with Cap |
| 545700.901 | HA Aluminum Standard Concentric Cylinder Cup with CapNote: For HR x0, DHR & AR-Series Peltier Jacket. |
| 545702.901 | DHR & AR-G2, Starch Pasting Cell |
| 545712.901 | DHR & AR-G2, Replacement Rotor for Starch Pasting Cell |
| 545713.901 | DHR & AR-G2, HA Aluminum Conical Rotor For Starch Pasting Cell |
| 545723.001 | Replacement Cup for Starch Pasting Cell |
| 545803.901 | DHR Upper Heated Plate SystemNote: For use with Peltier Plate. |
| 545807.901 | HR x0, DHR & AR-Series UHP and Dry Asphalt Standard Cooling OptionNote: This cooling option is required when cooling with fluid circulatorabove temperatures of 5 °C. Customer must supply fluid circulator. |
| 545808.901 | HR x0, DHR & AR-Series UHP and Dry Asphalt Low Temperature CoolingOptionNote: This cooling option is required when cooling with fluid circulatorbelow temperatures of 5 °C. Customer must supply fluid circulator. |
| 545809.901 | DHR & AR-Series UHP and Dry Asphalt Vortex CoolerNote: Requires Low Temperature Cooling Option (P/N: 545808.901). |
| 545815.901 | DHR & AR-G2 Upper Heated Plate Smart Swap Geometry Shaft and HeatSpreader |
| 545851.001 | 6 mm UHP Dry Asphalt System Trimming ToolNote: For use with Stepped Peltier. |
| 545852.001 | 3 mm UHP Plate Trimming ToolNote: For use with Standard Peltier Plate. |
| 545879.901 | HR x0, DHR & AR-G2 UHP Heat Flow Calibration Kit |
| 545903.901 | DHR & AR-G2, Smart Swap Interfacial Bicone Accessory |
| 545904.901 | DHR & AR-G2 Rheometer Custom Geometry Adapter |
| 545907.901 | DHR-3, DHR-2 Double Wall Ring Interfacial (DWR) Rheology System – For Standard Peltier PlateNote 1: Includes DWR Pt/Ir Ring Geometry and Delrin Trough. Note 2: Option requires standard Peltier Plate (P/N: 533210.901). |
| 545908.901 | HR x0, DHR-3, DHR-2 & AR-G2, Double Wall Ring Window Kit |
| 545909.901 | DHR-3, DHR-2 Double Wall Du Nouy Ring (DDR) Interfacial Rheology SystemNote: Option requires standard Peltier Plate (P/N: 533210.901). |
| 545910.901 | DHR-3, DHR-2 Double Wall Ring Interfacial (DWR) Rheology System – For Advanced Peltier PlateNote 1: Includes DWR Pt/Ir Ring Geometry and Delrin Trough. Note 2: Option requires Advanced Peltier Plate (P/N: 533209.901). |
| 545911.901 | DHR & AR-G2 Interfacial Geometry Holder |
| 545922.001 | HR x0, DHR, AR-G2 and AR 2000, 45 mm Diameter Teflon InterfacialBicone Cup |
| 545934.001 | DHR & AR-G2 Smart Swap Interfacial Bicone Geometry |
| 545950.001 | HR x0, DHR & AR-G2, Double Wall Ring, Platinum-IrNote: Replacement ring – does NOT include geometry holder. |
| 546009.901 | DHR & AR-G2, Stainless Steel, Conical DIN Rotor, Sandblasted,Rad = 14 mm, Height = 42 mmNote: For use with DHR & AR-G2 only. |
| 546011.901 | DHR & AR-G2, HA Aluminum Conical DIN Rotor, Rad = 14 mm,Height = 42 mmNote: For use with DHR & AR-G2 only. |
| 546012.901 | DHR & AR-G2, Stainless Steel, Conical DIN Rotor, Rad = 14 mm,Height = 42 mmNote: For use with DHR & AR-G2 only. |
| 546014.901 | HR x0, DHR & AR-G2, Upper Temperature Sensor Draw RodNote 1: For use with UPP, EHP and UHP temperature systems.Requires UTS geometries. UTS drawrod comes standard with UPP, EHP and UHP temperature systems ONLY. |
| 546016.901 | DHR & AR-G2, HA Aluminum Recessed End Rotor, Rad = 14 mm,Height = 42 mmNote: For use with DHR & AR-G2 only. |
| 546017.901 | DHR & AR-G2, Stainless Steel Recessed End Rotor, Rad = 14 mm,Height = 42 mmNote: For use with DHR & AR-G2 only. |
| 546018.901 | HR x0, DHR & AR-G2 Stainless Steel Helical Rotor |
| 546021.901 | DHR & AR-G2, Ver 1 HA Aluminum Double Gap Rotor,Inner Rad = 20.38 mm, Outer Rad = 21.96, Height = 59.5 mmNote: For use with DHR & AR-G2 only. |
| 546022.901 | DHR & AR-G2, Ver 1 Stainless Steel Double Gap Rotor, InnerRad = 20.38 mm, Outer Rad = 21.96, Height = 59.5 mmNote: For use with DHR & AR-G2 only. |
| 546026.901 | DHR & AR-G2, Stainless Steel Vaned Rotor, Rad = 14 mm, Height = 42 mmNote: For use with DHR & AR-G2 only. |
| 546027.901 | DHR & AR-G2, Wide Gap Vaned Rotor with Heat Break, Rad = 7.5 mm,Height = 38 mmNote: For use with DHR & AR-G2 only. |
| 546045.901 | Stainless Steel Double Gap Concentric Cylinder Cup,Diameter = 30.4 mm, Outer Rad = 18.5 mmNote: For HR x0, DHR & AR-Series Peltier Jacket. |
| 546046.901 | Stainless Steel, Single Gap Cup, Sandblasted, Rad = 15.2 mm |
| 546048.901 | DHR & AR-G2, Stainless Steel Double Gap Rotor, Inner Rad = 16 mm,Outer Rad = 17.5 mm, Height = 53 mmNote: For use with DHR & AR-G2 only. |
| 546049.901 | DHR & AR-G2, HA Aluminum Double Gap Rotor, Inner Rad = 16 mm,Outer Rad = 17.5 mm, Height = 53 mmNote: For use with DHR & AR-G2 only. |
| 546050.901 | HA Aluminum Double Gap Concentric Cylinder Cup,Inner Rad = 15.1 mm, Outer Rad = 18.5 mmNote: For HR x0, DHR & AR-Series Peltier Jacket. |
| 546093.001 | Helical Cup, HA Aluminum (diameter = 34 mm, height = 50 mm) |
| 546106.901 | DHR & AR-G2 Add-On Disposable Plate Accessory for EHPNote: Includes parts necessary to convert Electrically Heated PlateSystem (P/N: 533206.901), for disposable plate use. Includes five sets of25 mm drip channel disposable plates. |
| 546109.901 | EHP Glass Purge CoverNote: Maximum use temperature = 300 °C. |
| 546127.901 | HR x0, DHR and AR EHP GCA Kit (cooling down to -70 °C) |
| 546201.901 | DHR & AR-G2 Smart Swap UHP/EHP Upper Disposable Plate HolderNote: Not compatible with UTS. |
| 546202.901 | DHR & AR-G2, Stainless Steel, 8 mm Upper UTS PlateNote 1: For use with P/N: 546240.001 – Stainless Steel, 8 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546203.901 | DHR & AR-G2, Stainless Steel, 25 mm Upper UTS PlateNote 1: For use with P/N: 546241.001 – Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546204.901 | DHR & AR-G2, Stainless Steel, 40 mm Upper UTS PlateNote 1: For use with P/N: 546242.001 – Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546205.901 | DHR & AR-G2, Stainless Steel, 25 mm 1 deg Upper UTS ConeNote 1: For use with P/N: 546241.001 – Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546206.901 | DHR & AR-G2, Stainless Steel, 25 mm 0.02 Rad Upper UTS ConeNote 1: For use with P/N: 546241.001 – Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546207.901 | DHR & AR-G2, Stainless Steel, 25 mm 2 deg Upper UTS ConeNote 1: For use with P/N: 546241.001 – Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546208.901 | DHR & AR-G2, Stainless Steel, 25 mm 0.04 Rad Upper UTS ConeNote 1: For use with P/N: 546241.001 – Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546209.901 | DHR & AR-G2, Stainless Steel, 25 mm 4 deg Upper UTS ConeNote 1: For use with P/N: 546241.001 – Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546210.901 | DHR & AR-G2, Stainless Steel, 25 mm 0.1 Rad Upper UTS ConeNote 1: For use with P/N: 546241.001 – Stainless Steel, 25 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546211.901 | DHR & AR-G2, Stainless Steel, 40 mm 1 deg Upper UTS ConeNote 1: For use with P/N: 546242.001 – Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546212.901 | DHR & AR-G2, Stainless Steel, 40 mm 0.02 Rad Upper UTS ConeNote 1: For use with P/N: 546242.001 – Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546213.901 | DHR & AR-G2, Stainless Steel, 40 mm 2 deg Upper UTS ConeNote 1: For use with P/N: 546242.001 – Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546214.901 | DHR & AR-G2, Stainless Steel, 40 mm 0.04 Rad Upper UTS ConeNote 1: For use with P/N: 546242.001 – Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546215.901 | DHR & AR-G2, Stainless Steel, 40 mm 4 deg Upper UTS ConeNote 1: For use with P/N: 546242.001 – Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546216.901 | DHR & AR-G2, Stainless Steel, 40 mm 0.1 Rad Upper UTS ConeNote 1: For use with P/N: 546242.001 – Stainless Steel, 40 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546220.901 | DHR & AR-G2, Stainless Steel, 20 mm Upper UTS PlateNote 1: For use with P/N: 546261.001 – Stainless Steel, 20 mm Screw-in Plate for UPP, EHP, UHP, and DAS.Note 2: UTS upper Smart Swap 2 Geometries are for use with UTS Draw Rod and lower screw-in plates.UTS and UTS geometries are required for patented Active Temperature Control of upper plate. |
| 546239.001 | Stainless Steel, 4 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546240.001 | Stainless Steel, 8 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546241.001 | Stainless Steel, 25 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546242.001 | Stainless Steel, 40 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546255.001 | Stainless Steel, 25 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546256.001 | Stainless Steel, 40 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546259.001 | Stainless Steel, 8 mm Cross Hatched Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546261.001 | Stainless Steel, 20 mm Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546265.001 | Stainless Steel, 8 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546266.001 | Stainless Steel, 25 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546267.001 | Stainless Steel, 40 mm Sandblasted Screw-in Parallel Plate for UPP, EHP, UHP, and Dry Asphalt |
| 546301.901 | HR x0, DHR-3, DHR-2 & AR-Series, UV Light Guide Accessory withoutUV Light Source |
| 546303.901 | HR x0, DHR-3, DHR-2 & AR-Series, UV Light Guide Accessory with UV LightSource |
| 546316.901 | Replacement RadiometerNote: For UV Light Guide Accessory. |
| 546317.901 | Replacement RadiometerNote: For UV LED Accessory. |
| 546320.901 | DHR-3, DHR-2 & AR-G2, Stainless Steel, Smart Swap Disposable Plate Shaftfor UV Accessories |
| 546384.901 | UV-Curing Accessory Plate Rubber Ring Plate Guards |
| 546417.901 | DHR-3, DHR-2 & AR-G2 Quartz 50 mm Plate |
| 546483.001 | SALS Neutral Density Filter Kit |
| 546484.001 | SALS Polystyrene Alignment Material |
| 546502.901 | HR x0, DHR Dual-Stage Smart Swap Peltier PlateNote: Temperature Range = -45 °C to 200 °C. |
| 546601.901 | HR 30, HR 20, DHR Dielectric AccessoryNote: Requires appropriate geometries and customer-supplied LCR meter. |
| 546602.901 | HR x0, DHR 25 mm Upper Dielectric GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). |
| 546603.901 | HR x0, DHR 25 mm Lower Dielectric GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). |
| 546610.901 | HR x0, DHR Upper Dielectric Disposable GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). |
| 546615.901 | HR x0, DHR Lower Dielectric Disposable GeometryNote: For use with the HR 30, HR 20, DHR Dielectric Accessory (P/N: 546601.901). |
| 546701.901 | HR 30, HR 20, DHR Electro-Rheology Accessory (110VAC)Note: Requires Electro-rheology shield kit (P/N: 534060.901) for HR x0 and(P/N: 533604.901) for DHR. |
| 546701.902 | HR 30, HR 20, DHR Electro-Rheology Accessory (220VAC)Note: Requires Electro-rheology shield kit (P/N: 534060.901) for HR x0 and(P/N: 533604.901) for DHR. |
| 546705.901 | DHR Electro-Rheology, Parallel Plate, 40 mm |
| 546761.901 | DHR Electro-Rheology, Parallel Plate, 25 mm |
| 546762.901 | DHR Electro-Rheology, 25 mm DIN Rotor |
| 546800.901 | HR x0, DHR Optics Plate Accessory (OPA) |
| 546800.901 | HR x0, DHR Optics Plate Accessory (OPA) |
| 546800.902 | Optics Plate Accessory with Camera |
| 546801.901 | Optics Plate Accessory Replacement Glass Plates and O-rings |
| 546802.901 | DHR & AR-G2, Stainless Steel, 40 mm Parallel Plate, Mirror Finish |
| 546803.901 | DHR & AR-G2, Stainless Steel, 40 mm Upper UTS Plate, Mirror Finish |
| 546809.901 | Modular Microscope Accessory Replacement Thin Glass Cover |
| 546810.901 | HR 30, HR 20, DHR Modular Microscope Accessory (MMA) |
| 546812.901 | HR x0, DHR Optics Plate Thin Cover Glass Kit |
| 546814.901 | HR x0, DHR Counter-Rotating Optics Plate Accessory |
| 546815.901 | HR x0, DHR MMA Piezo Scanner 100 μm |
| 547004.901 | HR x0, DHR & AR-Series Generic Container HolderNote: Suitable for containers with OD in the range of 30 mm to 80 mm. |
| 547050.901 | HR x0, DHR High Sensitivity Pressure CellNote: Requires the Concentric Cylinder Peltier Jacket – P/N 533201.901. |
| 547052.901 | Starch rotor for HR x0, DHR High Sensitivity Pressure Cell (HSPC)Note: Requires HR x0, DHR High Sensitivity Pressure Cell – P/N: 547050.901. |
| 547100.901 | DHR Magneto-Rheology Accessory |
| 547106.901 | HR x0, DHR Magneto-Rheology Closed Loop Field Kit |
| 547107.901 | HR x0, DHR Magneto-Rheology Extended Temperature Kit |
| 547110.901 | DHR Magneto-Rheology Parallel Plate, 20 mm, Stainless Steel |
| 547111.901 | DHR Magneto-Rheology Cone, 20 mm, 2 deg, Stainless Steel |
| 547112.901 | HR x0, DHR Magneto-Rheology Lower Plate |
| 547200.901 | HR 30, HR 20, DHR-RH Accessory for Discovery Hybrid Rheometer |
| 547207.901 | HR x0, DHR-RH Parallel Plate Accessory Kit |
| 547208.901 | HR x0, DHR-RH Film/Fiber Tension Accessory Kit |
| 547210.901 | HR x0, DHR-RH Annular Ring Accessory |
| 547211.901 | HR x0, DHR-RH Surface Diffusion Accessory |
| 547278.901 | HR x0, DHR-RH 3-Point Bending Accessory Kit |
| 547279.901 | HR x0, DHR-RH Rectangular Torsion Clamp Accessory Kit |
| 547280.901 | HR x0, DHR-RH Tribo-rheometry, Ring Upper Geometry |
| 547281.901 | HR x0, DHR-RH Tribo-rheometry Accessory Base Kit |
| 547282.901 | HR x0, DHR-RH Cantilever Bending Clamp Kit |
| 547305.901 | Stainless Steel Single-Piece Concentric Cylinder Cup |
| 547308.901 | HR x0, DHR & AR-Series Electrically Heated Jacket Air Cooling Option |
| 547310.901 | HR x0, DHR & AR-Series Smart Swap Concentric Cylinder ElectricallyHeated Jacket |
| 547901.901 | HR x0, DHR & AR-Series Peltier Plate Camera Viewer Mounting KitNote: Customer must supply USB Web camera. Camera viewer is NOTcompatible with AR 2000 model. |
| 547902.901 | HR x0, DHR, AR-Series, and ARES-G2 Peltier Camera Viewer OptionNote: Camera viewer is NOT compatible with AR 2000 model. |
| 547905.901 | DHR & AR-G2 ETC Torsion Cylindrical Clamp Accessory KitNote: Includes collets to accommodate rods 1.5, 3, and 4.5 mm indiameter.Maximum Sample Length = 40 mm. |
| 547906.901 | SER3 Universal Testing Platform for HR 30, HR 20, DHR & AR |
| 547910.901 | HR x0, DHR & AR-Series Peltier Plate Immersion CellNote: Attaches to HR x0, DHR & AR-Series Smart Swap Peltier Plate.Allows testing of samples in parallel plate and cone and plate geometries while fully immersed in liquid. |
| 547920.901 | HR x0, DHR & AR-G2 Immobilization Cell Accessory |
| 547962.001 | Replacement Sieve for Immobilization Cell |
| 554001.901 | Stainless Steel, 8 mm Screw-in Parallel Plates for Asphalt Submersion Cell |
| 554002.901 | Stainless Steel, 25 mm Screw-in Parallel Plates for Asphalt Submersion Cell |
| 554003.901 | Asphalt Submersion Cell Replacement Filter Material, 1 Package |
| 554004.901 | Replacement Asphalt Submersion Cell Plate Removal Tool |
| 554007.901 | Asphalt Sample Molds, 1 Pair |
| 554008.901 | Stainless Steel, 12 mm Screw-in Parallel Plates for Asphalt Submersion Cell |
| 554019.902 | HA Aluminum, 8 mm Screw-in Parallel Plates for Asphalt Submersion Cell |
| 554020.902 | HA Aluminum, 25 mm Screw-in Parallel Plates for Asphalt Submersion Cell |
| 554024.901 | HR x0, DHR & AR-Series Automated Asphalt Temperature Calibration KitNote: Requires PC with USB port and TRIOS or Rheology AdvantageSoftware Version 5.7. or later. |
| 554103.901 | HR x0, DHR & AR-Series Smart Swap Asphalt Submersion Cell |
| 554104.901 | DHR & AR-Series Combined UHP and Peltier ManifoldNote: For use over temperature range of 5 °C to 90 °C.Requires chilling circulator with water circulation fluid controlled at 2 °C. |
| 570011.901 | Hard Anodized Aluminum Cover Plate (with Ring Adapter),Cross Hatched, 60 mm |
| 570059.901 | Hard Anodized Aluminum Cover Plate (with Ring Adapter),Cross Hatched, 40 mm |
| 575016.901 | HR x0, DHR, and AR-Series Oil-Free Compressor (240VAC/50Hz) |
| 575103.901 | Introduction to Rheology, H.A. Barnes, J.F. Hutton and K. Walters |
| 575105.901 | A Handbook of Elementary Rheology, Howard A. Barnes |
| 578096.001 | Replacement O-RingNote: For Double Gap Concentric Cylinder Cup. |
| 578148.001 | Replacement O-RingNote: For Standard and Grooved Concentric Cylinder Cups with Cap. |
| 578155.001 | Sample – Vessel 70 mm diameter (glass-cup) |
| 578904.001 | Brass Scraper (for cleaning plates) |
| 578905.001 | Brass Brush (for cleaning plates) |
| 595006.901 | DHR Electro-Rheology Dress Cover Grounding Retrofit Kit |
| 595010.901 | Julabo Fittings Kit |
| 613.04946 | Keysight E4980A LCR MeterNote: For HR x0, DHR and ARES-G2, RSA-G2 DETA: frequency range: 20Hz. to 2MHz.; AC test signal (potential) 0.005 to 20 Volts (115/230VAC; 50/60Hz). |
| 925714.001 | Software Advantage Navigator |
| 925715.001 | Enhanced Polymer Library for Advantage |
| 926018.001 | LAOS and FT RHEOLOGY for TRIOSNote: Large Amplitude Oscillatory Shear and Fourier Transform Rheology Software for TRIOS. |
| 926019.001 | Rheology Polymer Library for TRIOSNote: Includes software for Molecular Weight Distribution Calculations. |
| 926021.001 | DMA Mode for HR 20, DHR Rheometers |
| 935009.001 | Filter, External, 320 – 480 nmNote: For the Omnicure S-2000 with external filter adapter. |
| 935009.002 | Filter, External, 320 – 390 nmNote: For the Omnicure S-2000 with external filter adapter. |
| 935009.003 | Filter, External, 365 nmNote: For the Omnicure S-2000 with external filter adapter. |
| 935009.004 | Filter, External, 400 – 500 nmNote: For the Omnicure S-2000 with external filter adapter. |
| 935014.901 | PCA/UV External Filter Adapter Accessory KitNote: Allows use of external filters with the PCA (P/N: 935000.901). |
| 952377.901 | Fungicide for Peltier Reservoir |
| 991600.901 | Gas Cooling AccessoryNote: For HR x0, DMA 850, Q800, DHR, and AR-Series EHP. |
| 999801.064 | AutoPilot Basic Script Writing Service |
| 999801.066 | AutoPilot Advanced Script Writing Service |