河南东吉高科有限公司
备件
| P/N: | Product Description |
| 332042-0050 | Load Sensor – 22 Newtons, Calibration included |
| 332042-0050 | Load Sensor – 22 Newtons, Calibration included |
| 332042-0050 | Load Sensor – 22 Newtons, Calibration included |
| 332042-0050 | Load Sensor – 22 Newtons, Calibration included |
| 332042-0050 | Load Sensor – 22 Newtons, Calibration included |
| 332042-0050 | Load Sensor – 22 Newtons, Calibration included |
| 332042-0060 | Submersible Load Sensor – 22 Newtons, Calibration included |
| 332042-0060 | Submersible Load Sensor – 22 Newtons, Calibration included |
| 332042-0060 | Submersible Load Sensor – 22 Newtons, Calibration included |
| 332042-0060 | Submersible Load Sensor – 22 Newtons, Calibration included |
| 332042-0060 | Submersible Load Sensor – 22 Newtons, Calibration included |
| 332042-0070 | Load Sensor – 225 Newtons, Calibration included |
| 332042-0070 | Load Sensor – 225 Newtons, Calibration included |
| 332042-0070 | Load Sensor – 225 Newtons, Calibration included |
| 332042-0070 | Load Sensor – 225 Newtons, Calibration included |
| 332042-0070 | Load Sensor – 225 Newtons, Calibration included |
| 332042-0080 | Submersible Load Sensor – 225 Newtons, Calibration included |
| 332042-0080 | Submersible Load Sensor – 225 Newtons, Calibration included |
| 332042-0080 | Submersible Load Sensor – 225 Newtons, Calibration included |
| 332042-0080 | Submersible Load Sensor – 225 Newtons, Calibration included |
| 332042-0080 | Submersible Load Sensor – 225 Newtons, Calibration included |
| 332042-0090 | Load Sensor – 450 Newtons, Calibration included |
| 332042-0090 | Load Sensor – 500 Newtons, Calibration included |
| 332042-0090 | Load Sensor – 450 Newtons, Calibration included |
| 332042-0100 | Submersible Load Sensor – 450 Newtons, Calibration included |
| 332042-0100 | Submersible Load Sensor – 450 Newtons, Calibration included |
| 332042-0140 | Load Sensor – 45 Newtons, Calibration included |
| 332042-0140 | Load Sensor – 45 Newtons, Calibration included |
| 332042-0140 | Load Sensor – 45 Newtons, Calibration included |
| 332042-0140 | Load Sensor – 45 Newtons, Calibration included |
| 332042-0140 | Load Sensor – 45 Newtons, Calibration included |
| 332042-0160 | Submersible Load Sensor – 45 Newtons, Calibration included |
| 332042-0160 | Submersible Load Sensor – 45 Newtons, Calibration included |
| 332042-0160 | Submersible Load Sensor – 45 Newtons, Calibration included |
| 332042-0160 | Submersible Load Sensor – 45 Newtons, Calibration included |
| 332042-0160 | Submersible Load Sensor – 45 Newtons, Calibration included |
| 332042-0240 | Load Sensor – 5 Newtons, Calibration included |
| 332042-0240 | Load Sensor – 5 Newtons, Calibration included |
| 332042-0240 | Load Sensor – 5 Newtons, Calibration included |
| 332042-0240 | Load Sensor – 5 Newtons, Calibration included |
| 332042-0250 | Submersible Load Sensor – 5 Newtons, Calibration included |
| 332042-0250 | Submersible Load Sensor – 5 Newtons, Calibration included |
| 332042-0250 | Submersible Load Sensor – 5 Newtons, Calibration included |
| 332042-0250 | Submersible Load Sensor – 5 Newtons, Calibration included |
| 332229-0010 | Tension/Torsion Vice Grips, 316 SS, 3000N/50Nm Capacity Rating,Grit Face |
| 332229-0040 | Tension/Torsion Vice Grips, 316 SS, 3000N/50Nm Capacity Rating,Knurled Face |
| 332233-0010 | Tension/Compression Wedge Grips, Fatigue-Rated, 15kN CapacityNote: These grips are for axial testing only. Grip bodies include one gripwedge jaw set identified by parts 332289-XXXX. |
| 332234-0010 | Tension/Compression/Torsion (AT) Wedge Grips, Fatigue-Rated,15kN/100Nm CapacityNote: Grip bodies include one grip wedge jaw set identified by parts332289-XXXX. |
| 332271-0010 | Tension/Torsion Grips, Stainless Steel, Knurled Grip Faces,3000N/50Nm Capacity |
| 332271-0020 | Tension/Torsion Grips, Stainless Steel, V-Cut Grip Faces(5-15 mm dia. Specimens), 3000N/50Nm Capacity |
| 332271-0030 | Tension/Torsion Grips, Stainless Steel, V-Cut Grip Faces(2-6 mm dia. Specimens), 3000N/50Nm Capacity |
| 332271-0040 | Tension/Torsion Grips, Stainless Steel, Grit Blast Grip Faces,3000N/50Nm Capacity |
| 332274-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force CapacityNote: Includes set of 10-32 to 5/8-18 adapters. |
| 332274-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force CapacityNote: Includes set of 10-32 to 5/8-18 adapters. |
| 332276-0010 | Compression Platens, 50 mm diameter, 500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. |
| 332276-0020 | Compression Platens, 25 mm diameter, 500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. |
| 332277-0030 | 3- and 4-Point Bend Fixture, 10 mm to 100 mm adjustable lower span,2 & 4 mm points, 500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. |
| 332277-0040 | 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. |
| 332278-0010 | Adapter, 5/8-18 to 10-32 thread, for use with low force grips and fixtureson standard 1kN or 3kN load sensorsNote: Price is for set of 2. |
| 332281-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N CapacityNote: Includes set of 10-32 to 5/8-18 adapters. |
| 332283-0010 | Additional Tension/Compression Grip Face, Knurled FaceNote: For use with 332368-00XX Tension/Compression Grips. |
| 332283-0010 | Additional Tension/Compression Grip Face, Knurled FaceNote: For use with 332368-00XX Tension/Compression Grips. |
| 332283-0010 | Additional Tension/Compression Grip Face, Knurled FaceNote: For use with 332368-00XX Tension/Compression Grips. |
| 332283-0010 | Additional Tension/Compression Grip Face, Knurled FaceNote: For use with 332368-00XX Tension/Compression Grips. |
| 332284-0010 | Additional Tension/Torsion Grip Face, Knurled FaceNote: For use with 332271-00XX Tension/Torsion Grips. |
| 332284-0020 | Additional Tension/Torsion Grip Face, V-Cut Grip Faces(5-15 mm dia. Specimens)Note: For use with 332271-00XX Tension/Torsion Grips. |
| 332284-0030 | Additional Tension/Torsion Grip Face, V-Cut Grip Faces(2-6 mm dia. Specimens)Note: For use with 332271-00XX Tension/Torsion Grips. |
| 332284-0040 | Additional Tension/Torsion Grip Face, Grit Blast FaceNote: For use with 332271-00XX Tension/Torsion Grips. |
| 332289-0010 | Wedge Grip Jaw Set, F1 (for flats 0 to 4.0 mm) |
| 332289-0010 | Wedge Grip Jaw Set, F1 (for flats 0 to 4.0 mm) |
| 332289-0020 | Wedge Grip Jaw Set, F2 (for flats 3.5 to 7.0 mm) |
| 332289-0020 | Wedge Grip Jaw Set, F2 (for flats 3.5 to 7.0 mm) |
| 332289-0030 | Wedge Grip Jaw Set, F3 (for flats 6.5 to 10.0 mm) |
| 332289-0030 | Wedge Grip Jaw Set, F3 (for flats 6.5 to 10.0 mm) |
| 332289-0040 | Wedge Grip Jaw Set, F4 (for flats 9.5 to 13.0 mm) |
| 332289-0040 | Wedge Grip Jaw Set, F4 (for flats 9.5 to 13.0 mm) |
| 332289-0050 | Wedge Grip Jaw Set, F5 (for flats 12.5 to 16.0 mm) |
| 332289-0050 | Wedge Grip Jaw Set, F5 (for flats 12.5 to 16.0 mm) |
| 332289-0060 | Wedge Grip Jaw Set, F6 (for flats 15.5 to 19.0 mm) |
| 332289-0060 | Wedge Grip Jaw Set, F6 (for flats 15.5 to 19.0 mm) |
| 332289-0070 | Wedge Grip Jaw Set, R1 (for rounds 4 to 7.2 mm) |
| 332289-0070 | Wedge Grip Jaw Set, R1 (for rounds 4 to 7.2 mm) |
| 332289-0080 | Wedge Grip Jaw Set, R1 (for rounds 7 to 10.0 mm) |
| 332289-0080 | Wedge Grip Jaw Set, R1 (for rounds 7 to 10.0 mm) |
| 332289-0090 | Wedge Grip Jaw Set, R1 (for rounds 9.7 to 12.5 mm) |
| 332289-0090 | Wedge Grip Jaw Set, R1 (for rounds 9.7 to 12.5 mm) |
| 332289-0100 | Wedge Grip Jaw Set, R1 (for rounds 12.2 to 15.2 mm) |
| 332289-0100 | Wedge Grip Jaw Set, R1 (for rounds 12.2 to 15.2 mm) |
| 332289-0110 | Wedge Grip Jaw Set, R1 (for rounds 14.9 to 18.0 mm) |
| 332289-0110 | Wedge Grip Jaw Set, R1 (for rounds 14.9 to 18.0 mm) |
| 332289-0120 | Wedge Grip Jaw Set, R1 (for rounds 17.7 to 19.0 mm) |
| 332289-0120 | Wedge Grip Jaw Set, R1 (for rounds 17.7 to 19.0 mm) |
| 332292-0010 | Tension/Compression/Torsion (AT) Wedge Grips, Fatigue-Rated,3000N/28Nm Capacity, 3000N/50Nm CapacityNote: Grip bodies include one grip wedge jaw set identified by parts332289-XXXX. |
| 332327-0010 | Axial/Torsion Load Sensor, 450N/5.6Nm, Configured to Match InstrumentCapacity, Calibration included |
| 332327-0010 | Axial/Torsion Load Sensor 225N/2.8 Nm (gained to value), Calibrationincluded |
| 332329-0010 | Load Sensor – 1000 Newtons, M16 Threads, Calibration included |
| 332329-0020 | Load Sensor – 5000 Newtons, M16 Threads, Calibration included |
| 332329-0030 | Load Sensor – 12.5 kN, M16 Threads, Configured to Match InstrumentCapacity, Calibration includedNote: Spare Sensor for 3510. |
| 332329-0040 | Load Sensor – 25 kN, M16 Threads, Configured to Match InstrumentCapacity, Calibration includedNote: Spare Sensor for 3550. |
| 332330-0020 | Load Sensor – 3000 Newtons, 5/8-18 threads, Calibration included |
| 332330-0040 | Load Sensor – 1000 Newtons, 5/8-18 threads, Calibration included |
| 332331-0010 | Axial/Torsion Load Sensor 1100N/14Nm, 8xM6 Threads,Calibration included |
| 332331-0040 | Axial/Torsion Load Sensor 15kN/70Nm, 8xM6 Threads,Calibration included |
| 332332-0020 | Axial/Torsion Load Sensor 3000N/56 Nm, configured to matchinstrument capacity, Calibration included |
| 332338-0010 | Pressure Sensor, 0 – 500 mmHg Measurement Range, Catheter Type,Calibration included |
| 332368-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force Capacity |
| 332368-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force Capacity |
| 332368-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force Capacity |
| 332368-0010 | Tension/Compression Grips, Titanium, Knurled Grip Faces,450N Force Capacity |
| 332368-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force Capacity |
| 332368-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force Capacity |
| 332368-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force Capacity |
| 332368-0020 | Tension/Compression Grips, Titanium, V-Cut Grip Faces (2-6 mm dia.),450N Force Capacity |
| 332369-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N Capacity |
| 332369-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N Capacity |
| 332369-0010 | LSO Tension/Compression DMA Grips, Titanium, Knurled Grip Face, 500NCapacityNote: This geometry/fixture is not compatible with FCO oven. |
| 332369-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N Capacity |
| 332369-0010 | Tension/Compression DMA Grips, Titanium, Knurled Grip Face,500N Capacity |
| 332371-0010 | Compression Platens, 25 mm diameter, 500N Capacity |
| 332371-0010 | Compression Platens, 25 mm diameter, 500N Capacity |
| 332371-0010 | LSO Compression Platens, 25 mm diameter, 500N CapacityNote: This geometry/fixture is not compatible with FCO oven. |
| 332371-0010 | Compression Platens, 25 mm diameter, 500N Capacity |
| 332371-0020 | Compression Platens, 50 mm diameter, 500N Capacity |
| 332371-0020 | Compression Platens, 50 mm diameter, 500N Capacity |
| 332371-0020 | Compression Platens, 50 mm diameter, 500N Capacity |
| 332372-0030 | 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N Capacity |
| 332372-0030 | 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N Capacity |
| 332372-0030 | LSO 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N CapacityNote: This geometry/fixture is not compatible with FCO oven. |
| 332372-0030 | 3-Point Bend Fixture, 10 mm to 100 mm adjustable span,2 & 4 mm points, 500N Capacity |
| 332372-0040 | 3- and 4-Point Bend Fixture, 10 mm to 100 mm adjustable lower span,2 & 4 mm points, 500N Capacity |
| 332372-0040 | 3- and 4-Point Bend Fixture, 10 mm to 100 mm adjustable lower span,2 & 4 mm points, 500N Capacity |
| 332372-0040 | 3- and 4-Point Bend Fixture, 10 mm to 100 mm adjustable lower span,2 & 4 mm points, 500N Capacity |
| 333898-0030 | Compression Platens, 50 mm diameter, 5/8-18 Threads, 3000N Capacity |
| 333898-0040 | Compression Platens, 50 mm diameter, M16X2 Threads, 15kN Capacity |
| 333898-0050 | Compression Platens, 100 mm diameter, M16X2 Threads, 15kN Capacity |
| 334169-0010 | 3- and 4-Point Bend Fixture, 15 mm to 160 mm adjustable span,5 & 10 mm points, 5/8-18 Threads, 3000N Capacity |
| 334169-0020 | 3-Point Bend Fixture, 15 mm to 160 mm adjustable span,5 & 10 mm points, 5/8-18 Threads, 3000N Capacity |
| 334169-0030 | 3- and 4-Point Bend Fixture, 15 mm to 160 mm adjustable span,5 & 10 mm points, M16 Threads, 15kN Capacity |
| 334169-0040 | 3-Point Bend Fixture, 15 mm to 160 mm adjustable span,5 & 10 mm points, M16 Threads, 15kN Capacity |
| 335039-0010 | Compression Platens, 100 mm diameter, 5/8-18 Threads, 3000N Capacity |
| 335168-0070 | UPS 1500VA 120V, Power Failure Backup for 5500 |
| 335168-0070 | UPS 1500VA 120V, Power Failure Backup for any 3200 Axial-onlyInstrument |
| 335168-0070 | UPS 1500VA 120V, Power Failure Backup for TestBench base system |
| 335168-0090 | UPS 2000VA 120V, Power Failure Backup for 3200 Axial-Torsion or3200 Extended Stroke |
| 335168-0090 | UPS 2000VA 120V, Power Failure Backup for Planar Biaxial |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for 5500 |
| 335168-0100 | UPS 2200VA 208V/230V, Power Failure Backup for any 3200 Instrument |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for DMA 3200 InstrumentNote: This is to maintain power to the base DMA 3200 Instrument, not theoven or chiller. Includes communication cable to WinTest to trigger 300sec shutdown delay upon power loss. |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for 3310 |
| 335168-0100 | UPS 2200VA 208/230V, Power Failure Backup for 200N/400N TestBench |
| 335168-0100 | UPS 2200VA 208V/230V, Power Failure Backup for Planar Biaxial |
| 335168-0120 | UPS 3000VA 208/230V, Power Failure Backup for FCO or LSONote: This is to maintain power to the DMA 3200’s oven. This does notinclude maintaining the ACS chiller power. This does not communicatewith WinTest. |
| 335168-0120 | UPS 3000VA 208V/230V, Power Failure Backup for 3330 Axial and all 3310& 3330 -AT and -ES Configurations |
| 335195-0010 | Load Sensor, Mini-Beam – 40 Newtons, Calibration included |
| 335195-0040 | Load Sensor, Mini-Beam – 100 Newtons, Calibration included |
| 336709-0010 | Tension/Compression Non-Submersible DMA Grips, Aluminum,Knurled Grip Faces, 450N Capacity |
| 336709-0010 | Tension/Compression Non-Submersible DMA Grips, Aluminum,Knurled Grip Faces, 450N Capacity |
| 336964-0010 | Miniature 3-Point Bend Fixture, 4 mm to 26 mm adjustable lower span,450N Capacity |
| 336964-0010 | Miniature 3-Point Bend Fixture, 4 mm to 26 mm adjustable lower span,450N Capacity |
| 336964-0010 | Miniature 3-Point Bend Fixture, 4 mm to 26 mm adjustable lower span,450N Capacity |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories,or extended function generation sequences to use in tests where anonstandard or more complex drive function is required. |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. |
| 337534-0010 | External WaveformNote: Allows users to program custom waveforms, time histories, orextended function generation sequences to use in tests where anonstandard or more complex drive function is required. |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. |
| 337536-0010 | Dynamic Link LibraryNote: Functionality to allow user-written programs using externalprograms to access test system data and functions. Examplecompatible programs are LabView, MatLab, Visual Basic. |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/-10V high level analog input typical). Includes interface cable andproject file. |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function (+/-10Vhigh level analog input typical). Includes interface cable and project file. |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/-10V high level analog input typical). Includes interface cableand project file. |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/-10V high level analog input typical), Includes interface cable andproject file. |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function (+/-10Vhigh level analog input typical). Includes interface cable and project file. |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function (+/-10Vhigh level analog input typical). Includes interface cable and projectfile. |
| 337537-0010 | A/D MoverNote: Optional input channel for user-supplied external function(+/- 10V high level analog input typical). Includes interface cable andproject file. |
| 340261-0010 | TestBench Vertical Mounting Legs |
| 350106-0010 | Miniature 3- and 4-Point Bend Fixture, 4 mm to 26 mm adjustable lowerspan, 450N Capacity |
| 350106-0010 | Miniature 3- and 4-Point Bend Fixture, 4 mm to 26 mm adjustable lowerspan, 450N Capacity |
| 350106-0010 | Miniature 3- and 4-Point Bend Fixture, 4 mm to 26 mm adjustable lowerspan, 450N Capacity |
| 350261-0010 | Compression Platens, 10 mm diameter, 500N Capacity |
| 350261-0010 | Compression Platens, 10 mm diameter, 500N Capacity |
| 350261-0010 | Compression Platens, 10 mm diameter, 500N Capacity |
| 350390-0010 | Tension/Compression Wedge Grips, Fatigue-Rated,3000N/50Nm CapacityNote: These grips are for axial testing only. Grip bodies include one gripwedge jaw set identified by parts 332289-XXXX. |
| 362164-0010 | Acceleration compensation option, 100 g accelerometer, 10-32 Threads |
| 362164-0010 | Acceleration compensation option, 100 g accelerometer, 10-32 Threads |
| 362164-0010 | Acceleration compensation option, 100 g accelerometer, 10-32 Threads |
| 362165-0010 | Acceleration compensation option, Lightweight housing, 100 gaccelerometer, 10-32 ThreadsNote: For use with load sensor of 10 Newtons or less. |
| 362165-0010 | Acceleration compensation option, Lightweight housing, 100 gaccelerometer, 10-32 ThreadsNote: For use with load sensor of 10 Newtons or less. |
| 362165-0010 | Acceleration compensation option, Lightweight housing, 100 gaccelerometer, 10-32 ThreadsNote: For use with load sensor of 10 Newtons or less. |
| 362166-0010 | Acceleration compensation option, 100 g accelerometer, Axial/TorsionmountingNote: For use with Axial/Torsion load sensor. Compensates only for linearaccelerations. |
| 362166-0010 | Acceleration compensation option, 100 g accelerometer, Axial/TorsionmountingNote: For use with Axial/Torsion load sensor. Compensates only for linearaccelerations. |
| 367571-0010 | Acceleration compensation option, 100 g accelerometer,5/8-18 Threads |
| 367573-0010 | Acceleration compensation option, 100 g accelerometer,2xM16 Threads |
| 367577-0010 | Acceleration compensation option, 100 g accelerometer,8×1/4-28 ThreadsNote: For use on axial-torsion test instruments. Compensates for linearaccelerations only. |
| 369041-0010 | Acceleration compensation option, 100 g accelerometer, 8xM6 ThreadsNote: For use on axial-torsion test instruments. Compensates for linearaccelerations only. |
| 708.01446 | RSA-G2 and DMA 3200 Cantilever Bending Geometry |
| 708.01455 | RSA-G2 and DMA 3200 Film/Fiber Geometry |
| 708.01456 | RSA-G2 and DMA 3200 3-Point Bending Geometry |
| 708.01461 | RSA-G2 and DMA 3200 Shear Sandwich Geometry |
| 708.01464 | RSA-G2 and DMA 3200 Parallel Plate Compression GeometryNote: Includes 8mm, 15mm and 25mm Dia. Plates. |
| 708.01466.1 | Replacement 8 mm diameter Plates for RSA-G2 and DMA 3200 CompressionGeometry |
| 708.01466.2 | Replacement 15 mm diameter Plates for RSA-G2 and DMA 3200 CompressionGeometry |
| 708.01466.3 | Replacement 25 mm diameter Plates for RSA-G2 and DMA 3200 CompressionGeometry |
| 752960-0010 | System Status Indicator (SSI) Light Kit |
| 752960-0010 | System Status Indicator (SSI) Light Kit |
| 752960-0010 | System Status Indicator (SSI) Light Kit |
| 752960-0010 | System Status Indicator (SSI) Light Kit |
| 760129-0010 | Axial/Torsion Load Sensor 1000N/14 Nm, Calibration included |
| 760503-0010 | Compliance Calibration Kit for ElectroForce Instruments up to 500NNote: Recommended when using the DMA Application v8.0 or newer. |
| 760503-0020 | Compliance Calibration Kit for ElectroForce Instruments between1000N and 15000NNote: Recommended when using the DMA Application v8.0 or newer. |
| 760503-0020 | Compliance Calibration Kit for ElectroForce Instruments between1000N and 15000NNote: Recommended when using the DMA Application v8.0 or newer. |
| 760826-0010 | Autofill Add-on for Existing ElectroForce Bath Accys |
| 760858-0010 | Precision Adapter Kit for RSA Geometries on ElectroForce 3200 and TestBench200/400N, SST |
| 760858-0010 | Precision Adapter Kit for RSA Geometries on ElectroForce 3200 and TestBench200/400N, SST |
| 760872-0010 | Granite Table Assembly for ElectroForce Tabletop Instruments,36” x 36” x 35”H |
| 760872-0010 | Granite Table Assembly for ElectroForce Tabletop Instruments,36” x 36” x 35”H |
| 760872-0010 | Granite Table Assembly for ElectroForce Tabletop Instruments,36” x 36” x 35”H |
| 760890-0010 | Shield Accessory for ElectroForce 3200 Series III with Standard Columns |
| 760890-0020 | Shield Accessory for ElectroForce 3200 Series III with Extended Columns |
| 760891-0010 | Shield Accessory for ElectroForce 3300 Series III with Standard LengthColumnsNote: Compatible with 3300 Series I or II Instruments. |
| 760891-0020 | Shield Accessory for ElectroForce 3300 Series III with Extended ColumnsNote: Compatible with 3300 Series I or II Instruments. |