河南东吉高科有限公司
备件
| P/N: | Product Description |
| 203330.001 | Keysight E4980AL-102 LCR MeterNote: For ARES-G2, RSA-G2, and DHR DETA: frequency range: 20Hz to 1MHz; AC test signal (potential) 0.001 to 2 Volts (115/230VAC; 50/60Hz). |
| 203599.901 | Universal AC adapter kit for DSL Router |
| 251471.002 | DSL Router with 4-Port SwitchNote: For communication between an external controller and Thermal and Rheology instruments. |
| 251471.002 | DSL Router with 4-Port Switch |
| 259508.000 | Brass Tweezers |
| 270962.002 | Telescoping GaugeNote: For 17 mm single cantilever clamps. |
| 270975.001 | Filter Replacement, Auto Drain Regulator |
| 270976.002 | Filter/Regulator with Auto Drain |
| 401041.901 | ARES-G2, RSA-G2 and DMA 3200 FCO LN2 Controller Option |
| 401711.901 | ARES-G2 and RSA-G2 FCO Camera |
| 401798.901 | ARES/RSA3 to ARES-G2/RSA-G2 LN2 Upgrade Kit |
| 401892.901 | RSA-G2 Forced Convection Oven FCO |
| 402198.901 | RSA Immersion Geometry and Installation KitNote: Includes Tension and 15 mm diameter Compression Fixtures.Also includes 10 mm, 15 mm, and 20 mm 3-point bending fixtures.Compatible with the RSA-G2. |
| 402551.901 | ARES-G2 and RSA-G2 DETA Accessory Kit (LCR Meter not included)Note: Requires two RSA-G2 25 mm DETA Geometries (P/N: 402614.901)and customer-supplied Keysight E4980A LCR Meter (P/N: 613.04946), orKeysight E4980AL LCR Meter (P/N: 203330.001). |
| 402614.901 | RSA-G2 25 mm DETA GeometryNote: For use with the RSA-G2 DETA option (P/N: 402551.901). |
| 404005.901 | RSA-G2, Disposable DETA GeometryNote: For use with the RSA-G2 DETA option (P/N: 402551.901). |
| 404041.901 | ARES-G2, RSA-G2, & DMA 3200 FCO Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. |
| 405000.901 | ACS-3 Air Chiller System (240VAC; 60Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel(P/N: 404041.901) for operation. |
| 405000.901 | ACS-3 Air Chiller System (240VAC; 60Hz)Note: Requires DMA 850 & Q800 Air Chiller Panel (P/N: 986400.901) foroperation. |
| 405000.902 | ACS-3 Air Chiller System (220-230VAC/50Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel(P/N: 404041.901) for operation. |
| 405000.902 | ACS-3 Air Chiller System (220-230VAC; 50Hz)Note: Requires DMA 850 & Q800 Air Chiller Panel (P/N: 986400.901) foroperation. |
| 405001.901 | ACS-2 Air Chiller System (240VAC; 60Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel(P/N: 404041.901) for operation. |
| 405001.901 | ACS-2 Air Chiller System (240VAC; 60Hz)Note: Requires DMA 850 & Q800 Air Chiller Panel (P/N: 986400.901) foroperation. |
| 405001.902 | ACS-2 Air Chiller System (220-230VAC; 50Hz)Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel(P/N: 404041.901) for operation. |
| 405001.902 | ACS-2 Air Chiller System (220-230VAC; 50Hz)Note: Requires DMA 850 & Q800 Air Chiller Panel (P/N: 986400.901) foroperation. |
| 613.04946 | Keysight E4980A LCR MeterNote: For ARES-G2 and RSA-G2 DETA: frequency range: 20Hz. to 2MHz.; AC test signal (potential) 0.005 to 20 Volts (115/230VAC; 50/60Hz). |
| 700.02657.2 | ARES, RSA, and TAM Air Dryer |
| 708.01446 | RSA-G2 and DMA 3200 Cantilever Bending Geometry |
| 708.01455 | RSA-G2 and DMA 3200 Film / Fiber Geometry |
| 708.01456 | RSA-G2 and DMA 3200 3-Point Bending Geometry |
| 708.01461 | RSA-G2 and DMA 3200 Shear Sandwich Geometry |
| 708.01464 | RSA-G2 and DMA 3200 Parallel Plate Compression Geometry |
| 708.01465 | RSA-G2 Contact Lens Geometry Probe and Lens Holder |
| 708.01466.1 | Replacement 8 mm diameter PlatesNote: For RSA-G2 and DMA 3200 Compression Geometry. |
| 708.01466.2 | Replacement 15 mm diameter PlatesNote: For RSA-G2 and DMA 3200 Compression Geometry. |
| 708.01466.3 | Replacement 25 mm diameter PlatesNote: For RSA-G2 and DMA 3200 Compression Geometry. |
| 900902.901 | Indium Temperature Calibration Sample |
| 900907.901 | Zinc Temperature Calibration Sample |
| 980228.902 | Glass Support Cloth (0.2 mm thick, 33 m length) |
| 982161.902 | ABS Sample (3.18 mm thick, 61 mm length) (pkg. of 5) |
| 982161.903 | ABS Sample (3.18 mm thick, 36 mm length) (pkg. of 5) |
| 982165.902 | Polycarbonate Sample (1.6 mm thick, 60 mm length) (pkg. of 5) |
| 982165.903 | Polycarbonate Sample (1.6 mm thick, 36 mm length) (pkg. of 5) |
| 982165.904 | Polycarbonate Sample (0.79 mm thick, 36 mm length) (pkg. of 5) |
| 982166.003 | Compliance Sample – Dual Cantilever |
| 982166.004 | Compliance Sample – Single Cantilever |
| 984014.901 | 3-Point Bending Kit (20 and 50 mm) for DMA 850 & Q800 |
| 984015.901 | 35 mm Single / Dual Cantilever Kit for DMA 850 & Q800 |
| 984017.901 | Shear Sandwich Clamp Kit |
| 984022.901 | Penetration Clamp Kit |
| 984023.901 | Specialty Fiber Tension Clamp Kit |
| 984026.901 | 3-point Bending Clamp Kit (5, 10, and 15 mm lengths) |
| 984047.901 | 20 mm Single/Dual Cantilever Clamp Kit |
| 984048.901 | 8 mm Single/Dual Cantilever Clamp Kit |
| 984308.001 | DMA Calibration Standard 0.005 inch thick |
| 984308.002 | DMA Calibration Standard 0.010 inch thick |
| 984308.003 | DMA Calibration Standard 0.020 inch thick |
| 984308.004 | DMA Calibration Standard 0.030 inch thick |
| 984309.901 | Polyethylene Terephthalate (PET) Film (38 mm length) (pkg. of 10) |
| 984310.901 | Indium Wire, Film/Fiber Temperature Calibration (38 mm length)(pkg. of 10) |
| 984313.901 | PET Fiber (910 mm length) |
| 984331.901 | Film/Fiber Tension Clamp Calibration Kit |
| 984370.901 | Furnace Inlet Ferrule/Spring Kit (pkg. of 5) |
| 984486.901 | Film Cutting Kit |
| 985011.901 | Accessory Kit, Q800 DMA (supplied with the Q800 DMA module) |
| 985016.901 | Film/Fiber Tension Kit DMA 850 / Q800 (Single Screw Design, Mk II) |
| 985018.901 | DMA-RH Accessory Clamp Kit for DMA 850 & Q800Note: Specifically for use with the DMA-RH Accessory. Includes clamp components for 10 mm 3-pt bending, penetration, and 15 mm compression clamps. |
| 985052.901 | Thermocouple Baffle |
| 985069.901 | 3-point Bending Clamp Kit (50 mm, low friction) |
| 985070.901 | 3-point Bending Clamp Kit (20 mm, low friction) |
| 985078.001 | Dual Cantilever Clamp Screen |
| 985078.002 | Film/Fiber Tension Clamp Screen |
| 985098.901 | Q800 Submersion Clamp ThermocoupleNote: Required for customers who intend to use a DMA 850 submersionclamp kit with their Q800. Requires service engineer installation (quotedseparately). |
| 985164.901 | Powder KitNote: For use with 35 mm Cantilever Clamp Kit (P/N: 984015.901). |
| 985700.901 | DMA-RH (Relative Humidity) Accessory for DMA 850 & Q800 |
| 986012.901 | Discovery DMA 850 Standard Furnace |
| 986018.901 | Accessory Kit, DMA 850 (supplied with the DMA 850 module) |
| 986252.901 | Film/Fiber Tension Kit DMA 850 / Q800 (Dual Screw Design, Mk III) |
| 986260.901 | Submersion Compression Clamp Kit for DMA 850 |
| 986261.901 | Submersion Film / Fiber Tension Kit for DMA 850 |
| 986262.901 | Submersion 3-Point Bending Clamp Kit for DMA 850 |
| 986270.901 | Parallel Plate Compression Kit for DMA 850 & Q800 |
| 986310.901 | Nitrogen Purge Cooler |
| 986320.901 | DMA 850 Filter/Regulator |
| 986325.901 | DMA 850 Submersion Clamp ThermocoupleNote: Required for customers who intend to use an existing Q800submersion clamp kit with their new DMA 850. Requires service engineerinstallation (quoted separately). |
| 986345.901 | DMA-RH DMA 850 Adapter |
| 986350.901 | Air Compressor Accessory (ACA) for DMA 850 |
| 986400.901 | DMA 850/Q800 DMA Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. |
| 991600.901 | Gas Cooling Accessory – Auto Tank Fill (for cooling to -150 °C) |