河南东吉高科有限公司
安捷伦
| G3440-81664 | Oven Right Side Nut Plate Assy (8 POS) |
| G3440-81665 | Oven Left Side Nut Plate Assembly(8 POS) |
| G3440-85012 | Solvents-Plus Checkout Mix 3 x 2mL |
| G3440-85013 | C6 through C12 Hydrocarbon Mix 3 x 2mL |
| G3440-85017 | Natural Gas Analyzer Checkout Mix 14L |
| G3440-85018 | Standard glycerides in THF 1 x 2mL |
| G3440-85028 | Glycerol calibration kit 5 x 1mL |
| G3440-85029 | Methylheptadecanoatd33 In Dodecane 3x2mL |
| G3440-85039 | Dioxin Analyzer Checkout Standard Kit |
| G3440-88000 | Column Depth Guide |
| G3440-90000 | ReNEWable Gas Purifier Cartridge Manual |
| G3440-90001 | ReNEWable Gas Purifier – System Manual |
| G3450-83000 | 6-port valve, 225C, Nitronic 60 |
| G3480-20002 | 14-port Actuator limiter (for LVO only) |
| G3510-60820 | Multi Mode Inlet Cleaning Kit |
| G3520-20210 | XLSI Transfer Line Nut for CFT Fitting |
| G3666-67026 | Gas tubing set for Argon gas purifier |
| G3666-67067 | 8900 skimmer cone, Cu, s-lens, 1/pk |
| G3666-67401 | 8900 skimmer cone, Pt/Cu, s-lens, 1/pk |
| G3666-67411 | 8900 skimmer cone, Pt/Ni, s-lens, 1/pk |
| G3666-67421 | 8900 skimmer cone, Ni, s-lens, 1/pk |
| G3666-67501 | 8900 skimmer cone, Pt/Ni, m-lens, 1/pk |
| G3666-67511 | 7900/8900 skimmer cone, Ni, m-lens, 1/pk |
| G3971-20251 | Tube Holder |
| G3971-60200 | QuickProbe Probe Holder |
| G4200-80117 | Syringe,X-type CTC 25ul,GT,HTC-Pal |
| G4200-80118 | Syringe,X-type CTC 100ul,22,GT,HTC-Pal |
| G4200-80119 | Syringe,X-type CTC 100ul,22S,GT,HTC-Pal |
| G4204-68741 | PM Kit for 1290 Quaternary Pumps |
| G4204-68742 | Seal Wash PM kit for 1290 Quat Pumps |
| G4220-20013 | 4 mm Hex Bit, 89 mm length |
| G4220-20041 | Bit Torx 10×25 mm |
| G4220-68741 | PM Kit for 1290 Binary Pumps |
| G4220-68742 | Seal Wash PM Kit for 1290 Binary Pumps |
| G4226-60415 | Loop flex assembly 40 ul |
| G4242-64000 | Multiple Heart-Cutting Valve |
| G4277-80120 | Syringe,100ul,RN,PTFE DLW 1290 HTC/HTS |
| G4277-80122 | Plungers,replacement 100ul,DLW HTC/HTS |
| G4277-80125 | Needle kit,pk 3 22g/51mm/PT 3 with nut |
| G4296-68715 | 1220 Infinity II LC Tool Kit |
| G4513-60560 | Syringe,250uL FN,PTFE,23/42/HP |
| G4513-60561 | Syringe,500uL FN,PTFE,23/42/HP |
| G4513-80200 | Syringe, 10 ul FN 23-26s/42/HP 6pk |
| G4513-80201 | Syringe, 5 ul FN 23-26s/42/HP 6pk |
| G4513-80202 | Syringe, 10 ul FN 23/42/HP 6/pk |
| G4513-80203 | Syringe, 10ul PTFE tip, FN 23-26/42/HP |
| G4513-80204 | Syringe, 10ul FN 23-26s/42/HP |
| G4513-80205 | Syringe, 5 ul, FN, 23/42/HP 6/pk |
| G4513-80206 | Syringe, 5 ul, FN 23-26s/42/HP |
| G4513-80207 | Syringe, 5 ul on-column RN, barrel only |
| G4513-80208 | Syringe, 10ul PTFE, FN 23-26/42/HP, 6/pk |
| G4513-80209 | Syringe 10ul straight, FN 23/42/HP |
| G4513-80210 | Syringe,10 ul, PTFE, FN, 23/42/HP 6/pk |
| G4513-80211 | Syringe, 10 ul, FN, 26s/42/HP 6/pk |
| G4513-80212 | Syringe, 5 ul, FN, 26s/42/HP 6/pk |
| G4513-80213 | Syringe, 5ul straight, FN 23/42/HP |
| G4513-80214 | Needle 0.32mm on-column,5ul syringe 3/pk |
| G4513-80215 | Syringe, 1 ul, 23g, 42mm cone tip |
| G4513-80216 | Syringe, 10ul straight, FN 26s/42/HP |
| G4513-80217 | Needle 0.25mm on-column,5ul syringe 3/pk |
| G4513-80218 | Syringe, 10 ul RN 23-26s/42/HP |
| G4513-80219 | Syringe,10 ul PTFE tip RN 23/42/HP |
| G4513-80220 | Syringe,10ul FN PTFE tip 23/42/HP |
| G4513-80221 | Syringe, 50ul, PTFE tip FN 23/42/HP |
| G4513-80222 | Syringe, 100ul PTFE tip, FN 23-26s/42/HP |
| G4513-80223 | Syringe, 50ul, PTFE tip, FN 23-26/42/HP |
| G4513-80224 | Syringe, 5ul RN, 23-26s/42/HP |
| G4513-80225 | Needles Replacement 23-26s/42/HP 3/pk |
| G4513-80226 | Syringe, 5ul straight, FN 26s/42/HP |
| G4513-80227 | Plunger 10 ul, fixed needle, PTFE |
| G4513-80228 | Syringe 25ul, PTFE tip FN 23/42/HP |
| G4513-80229 | Syringe, 0.5 ul, 23g, 42mm cone tip |
| G4513-80230 | Syringe, 100 ul, FN 23s/42/HP |
| G4513-80233 | Syringe, 10 ul,PTFE tip,RN, 23-26s/42/HP |
| G4513-80234 | Syringe, 5 ul RN 23/42/HP |
| G4513-80235 | Syringe,10 ul PTFE tip RN 23/42/HP |
| G4513-80236 | Needles replacement 23/42/HP 3/pk |
| G4513-80239 | Needle/plunger replacement kit 1ul auto |
| G4513-80240 | Needle/plunger replacemt kit 0.5 ul auto |
| G4513-80241 | Syringe 25ul PTFE tip FN 23-26/42/HP |
| G4513-80242 | Syringe, 25 ul, FN 23-26/42/HP |
| G4513-80243 | Syringe, 100ul FN 23-26/42/HP |
| G4513-80244 | Syringe, 50ul FN 23-26/42/HP |
| G4581-20522 | Torque Driver Extension |
| G4911-67000 | Peri pump tube Tygon 2-stop org/blu 12/p |
| G4912-68000 | PFA Inert kit, Sapphire 2.5mm with Torch |
| G4912-68001 | PFA Inert kit, Platinum 2.5mm with Torch |
| G4912-68002 | PFA Inert kit, Sapphire 1.5mm with Torch |
| G4912-68003 | PFA Inert kit, Platinum 1.5mm with Torch |
| G4912-80010 | Sapphire injector, inert torch, 1.5mm id |
| G4912-80011 | Platinum injector, inert torch, 1.5mm id |
| G4912-80012 | Torch for PFA inert kit for ICP-MS, 1/pk |
| G4912-80013 | Demountable torch, ICP-MS inert kit 1/pk |
| G4912-80014 | Drain Tube For Inert Spl Intro, PFA |
| G4912-80016 | Connector tube with gas port, inert kit |
| G5611-60500 | Ti capillary 0.17 mm ID, 400 mm long |
| G5611-60501 | Ti capillary 0.17 mm ID,700 mm long |
| G5611-60502 | Ti capillary 0.17 mm ID, 900 mm long |
| G5611-60503 | Ti capillary 0.17 mm ID, 160 mm long |
| G5611-67300 | Capill. Ti Pump Chamber 1 (OV) to Damper |
| G5611-67301 | Capillary Ti Damper to Pump Chamber 2 |
| G5611-68711 | Capillary Starter Kit 0.17mm Bio |
| G5611-68755 | Accessory Kit BIO |
| G5616-81000 | Heat exch.PK/ST 0.17×500 RLO/RLO Bio |
| G5642-64000 | Bio Multiple Heart-Cutting Valve |
| G5667-81000 | Capillary PK/ST 0.17x105mm RLO/RLO BIO |
| G5667-81001 | Capillary PK/ST 0.17x150mm RLO/RLO BIO |
| G5667-81002 | Capillary PK/ST 0.17x200mm RLO/RLO BIO |
| G5667-81003 | Capillary PK/ST 0.17x300mm RLO/RLO BIO |
| G5667-81004 | Capillary PK/ST 0.17x400mm RLO/RLO BIO |
| G5667-81005 | Capillary PK/ST 0.17x500mm RLO/RLO BIO |
| G5667-81006 | Loop PK/ST 100ul RLO/RLO Bio |
| G5667-81007 | Capillary PK/ST 0.17x700mm RLO/RLO BIO |
| G5667-81008 | Seat PK/ST 0.17×105 RLO/RLO Bio |
| G6015A | InfinityLab Flex Bench MS w/o PS |
| G6301-68010 | Ultivo PM Kit |
| G6500-60019 | Headspace Syringe Holder Kit, 5ml |
| G6500-80101 | Sample tray,CTC,98 2ml / 78 1ml vials |
| G6500-80107 | Syringe, CTC Headspace, 1.0 ml, 23 g |
| G6500-80109 | Syringe, CTC Headspace, 2. 5 ml, 23 g |
| G6500-80111 | Syringe, CTC Headspace, 5.0 ml, 23 g |
| G6500-80113 | Syringe, CTC 1.2 ul, 2 Combi/GC-Pal |
| G6500-80114 | Syringe, CTC 5 ul, 2 Combi/GC-Pal |
| G6500-80115 | Syringe, CTC 10 ul, pt 2 Combi/GC-Pal |
| G6500-80116 | Syringe, CTC 10 ul, Combi/GC-Pal |
| G6500-80117 | Syringe, CTC 25 ul, Combi/GC-Pal |
| G6500-80118 | Syringe, CTC 100 ul, Combi/GC-Pal |
| G6500-80119 | Syringe, CTC 250 ul, Combi/GC-Pal |
| G6500-80120 | Syringe,CTC 500 ul,Combi/GC-Pal |
| G6500-80121 | Sample tray,CTC,32 10 or 20ml vials |
| G6500-88027 | Caps and Seals for Wash Sta Vials (10) |
| G6691-40500 | ADM Flow Meter Case |
| G6691A | ADM Flow Meter |
| G6691E | ADM Flow Meter Made to Order |
| G6692-68000 | Tubing, 18″ length, 0.12ID x 0.25OD |
| G6692A | Replacement Cartridge for ADM Flow Meter |
| G6692E | ADM Replacement Cartridge Made to Order |
| G6692X | Replacement ADM Cart with Assessment |
| G6693A | CrossLab CS Electronic Leak Detector |
| G6694-60005 | Leak Detector Mesh Filter |
| G6694A | Electronic Leak Detector Cartridge |
| G6699A | CrossLab CS Bundle |
| G6874-80000 | Specular reflect. std, 7 deg, NIST cert. |
| G7116-68004 | Column Holder Clamp (2/pk) |
| G7120-68708 | InfinityLab System Tool kit |
| G7121-68001 | FLD Wavelength Calibration kit |
| G7161-60042 | Bottle Head Assembly Prep EL |
| G7378-80100 | Syringe CTC PAL3 HS, 1mL 23/56/SH |
| G7378-80101 | Syringe CTC PAL3 HS, 2.5mL 23/56/SH |
| G7378-80102 | Syringe CTC PAL3 HS, 5mL 23/56/SH |
| G7910-87002 | Thermal Paper 57mmx13m ,10 Rolls per Pk |
| G7972-47000 | Glass Tube Calib.50ml Alza BioDis(pck25) |
| G8000-64142 | Nebulizer gas connector for MP-AES |
| G8000-70001 | Replacement onboard Argon bottle |
| G8000-70007 | MP s/chamber, double pass glass cyclonic |
| G8003-60031 | Sample Capillary, MP Concentric neb 1/pk |
| G8007-68000 | PuraFlex transfer tube, IsoMist + MP-AES |
| G8007-68001 | MPAES s/chamber encapsulated for IsoMist |
| G8010-60136 | Filter Argon ICP-OES 5100 Series |
| G8010-60189 | Spare filter,dusty env. air inlet 5100 |
| G8010-60834 | Link tubing SVS2 to Unifit Neb, 50mm 1/p |
| G8010-68018 | O-Ring pre-optic window ax,5100 ICP 1/pk |
| G8010-68023 | Right Angle Drain Fitting, Isomist, 3/pk |
| G8010-68024 | ICP s/chamber, Encapsulated For Isomist |
| G8010-80035 | UniFit sample connector, 0.75mm id,10/pk |
| G8010-80036 | UniFit drain connector, 2.0mm od, 3/pk |
| G8010-80042 | Replacement Helix Seal ICP S/Chamber 4/P |
| G8010-80043 | Helix Locking Screw ICP S/Chamber, 1/pk |
| G8014-20002 | Baffle, inert s/chamber 5100/5110 ICP+MP |
| G8014-68005 | O-ring kit for inert s/c (G8014-68002) |
| G8014-68007 | Drain Connector 10/32UNF to Luer Slip |
| G8020-60805 | Quartz Inj. 0.8mm ID, 5XXX Fully Demount |
| G8020-60806 | Quartz Inj. 1.4mm ID, 51×0 Fully Demount |
| G8020-60807 | Quartz Inj. 1.8mm ID, 51×0 Fully Demount |
| G8020-60808 | Quartz Inj. 2.4mm ID, 5XX0 Fully Demount |
| G8020-60809 | Alumina Inj. 1.8mm ID 5XX0 Fully Demount |
| G8020-68016 | Spare filter element, air inlet 58/5900 |
| G8400-60327 | Clamp,torch ball joint connector,1/pk |
| G8400-60700 | Argon humidifier, two gas lines, 7900 |
| G8400-67150 | Spray Chamber for UHMI, 7900 ICP-MS 1/pk |
| G8400-67200 | 7900/8900 skimmer cone, Ni, x-lens, 1/pk |
| G8400-67201 | 7900/8900 skimmer cone,Pt/Cu,x-lens, 1/p |
| G8400-67202 | 7900/8900 skimmer cone,Pt/Ni,x-lens,1/pk |
| G8410-20012 | Tubing-solvent resistant 0.093-in-ID, 2m |
| G8410-20013 | Tubing-solvent resistant 0.187-in-ID, 2m |
| G8410-40000 | Standards Rack For SPS4, 34 Position 1/p |
| G8410-40001 | Standards rack for SPS4, 5 position 1/p |
| G8410-40003 | Well Plate Tray Adaptor Kit For SPS4 1/p |
| G8410-60100 | SPS 4 Autosampler Cover Kit, 1/pk |
| G8410-60140 | Single Port Fixed Wash Reservoir, SPS4 |
| G8410-60150 | Dual Port Fixed Wash Reservoir Kit, SPS4 |
| G8410-67001 | Cable ties, natural polypropylene, 10/pk |
| G8410-68270 | Well Plate Startup Kit For SPS 4, 1/pk |
| G8410-80111 | Standard Rack Location Mat For SPS4, 1/p |
| G8410-80120 | Nipple, PVDF, 5mm ID, SPS4 rinse station |
| G8410-80121 | Nipple, PP, 2.5mm ID, SPS4 rinse station |
| G8410-80122 | PVC waste tubing 8mm od x 5mm id 2m SPS4 |
| G8410-80123 | Tubing rinse supply SPS 4, 2.5mm id x 1m |
| G8410-80124 | Barb connector for SPS4, 2.5mm-1.5mm ID |
| G8410-80605 | Spill Tray Kit For SPS4 Autosampler, 1/p |