河南东吉高科有限公司
安捷伦
| 393002601 | COVER,LIQUID CI RESERVOIR |
| 393010904 | VITON O-RING CLEAN 0.112 |
| 393010905 | VITON O-RING CLEAN 1.24 |
| 393010908 | VITON O-RING CLEAN 0.487 |
| 393010918 | QUAD-RING, XFERLINE, 1.112 ID |
| 393010920 | QUAD-RING,XFERLINE TO MAN.,1.925 ID |
| 393010924 | QUAD-RING, TOP FLANGE, 7.484 ID |
| 393031301 | ASSY, TRAP HEATER AND CABLE, 120V |
| 393031501 | Electron Multiplier Assembly, 220 GCMS |
| 393055101 | GATE TRAP ASSEMBLY |
| 393055201 | TRAP GATE CONDUCTOR |
| 393059191 | TRANSFER LINE TIP |
| 393060191 | Ion Trap Filament Disk Assy With Wires |
| 393060501 | SPRING GOLD PLATED, TRAP (ION TRAPS) |
| 393064601 | ELBOW, ROUGHING PUMP |
| 393131001 | PWA, ION AMPLIFIER |
| 393161001 | ASSY, FILAMENT, 4000/240MS, EXTERNAL |
| 393164493 | ASSY, 4×00, SILCO END CAP W/PLUG, FIELD |
| 393167593 | RF ELECTRODE, 4×00, SILCO, CLEAN, FIELD |
| 393171101 | TIP, TRANSFERLINE, EXTERNAL, CLEANED |
| 393171201 | ASSY, TIP, TRANSFERLINE, INT, CLEANED |
| 393173801 | ASSY, BASE, INT. IONIZATION SOURCE,CLEA |
| 393173901 | ASSY, GATE, INT. ION. SOURCE, CLEAN |
| 393175101 | MULTIPLIER CHANNELTRON, MOD CEM 4755 |
| 393177401 | CI GAS INLET, MANIFOLD |
| 393180801 | SPRING, CONTACT, HEATER, CLEANED |
| 393705201 | Multiplier, electron, channel |
| 393733701 | SPRAY PLATE |
| 393750102 | SKIMMER, 1.7 MM HOLE, 500MS |
| 393750103 | SKIMMER, 0.9 MM hole for 500u Capillary |
| 393753005 | ASSY,CAPILLARY; 600umID |
| 393755401 | SPRAY PLATE SUPPORT |
| 393781401 | ASSY, QUAD ION GUIDE, .109 R0 |
| 410105017 | Tubing, Solenoids to 6-Port, Deactivated |
| 4610017400 | Nebulizer spring, 1/pk |
| 4710002300 | Syringe 100 uL, for PSD-95/96/97/100 |
| 4710003100 | Plunger for 100uL syringe for PSD, 1/pk |
| 4710003200 | Syringe 100 uL for PSD 120, 1/pk |
| 5001-3702 | Column holder for u-LC columns |
| 5001-3730 | Mounting, cover sipper |
| 5001-3738 | Rod, Stainless Steel |
| 5001-3743 | Seal, Fit |
| 5005-0102 | ADS 2 tubing kit, Valve B set-up, 4/pk |
| 5005-0103 | ADS 2 tubing kit, Valve A-Valve C, 1/pk |
| 5005-0105 | ADS 2 tubing kit, Carrier/Diluent, 2/pk |
| 5005-0106 | ADS 2 tubing kit, Valve C set-up, 2/pk |
| 5005-0107 | ADS 2 tubing kit, Valve C-AVS Pump, 1/pk |
| 5005-0182 | ADS 2 tubing kit, Valve C-AVS Valve, 1/p |
| 5005-0420 | Sample loop ADS/AVS 0.25mL 1.00mm ID 1/p |
| 5005-0421 | Sample loop ADS/AVS 0.50mL 1.00mm ID 1/p |
| 5005-0422 | Sample loop ADS/AVS 0.75mL 1.00mm ID 1/p |
| 5005-0423 | Sample loop ADS/AVS 1.00mL 1.00mm ID 1/p |
| 5005-0424 | Sample loop ADS/AVS 1.25mL 1.00mm ID 1/p |
| 5005-0425 | Sample loop ADS/AVS 1.50mL 1.00mm ID 1/p |
| 5005-0426 | Sample loop ADS/AVS 2.00mL 1.00mm ID 1/p |
| 5005-0427 | Sample loop ADS/AVS 2.50mL 1.00mm ID 1/p |
| 5005-0428 | Sample loop ADS/AVS 1.00mL 2.18mm ID 1/p |
| 5005-0429 | Sample loop ADS/AVS 1.25mL 2.18mm ID 1/p |
| 5005-0430 | Sample loop ADS/AVS 1.50mL 2.18mm ID 1/p |
| 5005-0431 | Sample loop ADS/AVS 2.00mL 2.18mm ID 1/p |
| 5005-0432 | Sample loop ADS/AVS 2.50mL 2.18mm ID 1/p |
| 5005-0433 | Sample loop ADS/AVS 3.00mL 2.18mm ID 1/p |
| 5005-0434 | Sample loop ADS/AVS 4.00mL 2.18mm ID 1/p |
| 5005-0438 | Filter Element, IDP3, Exhaust |
| 5005-0439 | Gas Ballast Kit |
| 5005-0440 | Vibration Isolation Kit |
| 5005-0449 | Sample loop ADS/AVS 3.00mL 1.00mm ID 1/p |
| 5005-0450 | Sample loop ADS/AVS 3.50mL 1.00mm ID 1/p |
| 5005-0452 | Loop Holder, AVS / ADS 2, 1/pk |
| 5005-0453 | Tubing Clips, for ADS 2, 6/pk |
| 5005-0454 | Drip Tray for ADS 2, 1/pk |
| 5005-1259 | Plastic Fitting Plug, 20/pack |
| 5021-1831 | OQ/PV Test Capillary 50cm, 0.25 mm id |
| 5021-1870 | Union, cell holder, 89090A Temp Control |
| 5022-2141 | PEEK Ferrule For CE-MS Sprayer |
| 5022-2146 | Union Adjustment Tool |
| 5022-2159 | Capillary, SST 2m, 0.12mm id, ferrule |
| 5022-2175 | Piston seal, 2mm |
| 5022-2188 | Seal Prep Flange |
| 5022-2192 | SS filter assy with PEEK ring, 2 um pore |
| 5022-6503 | PEEK tubing, 1/32in od, 0.4mm id, 450 mm |
| 5022-6538 | Tray for 27 Eppendorf tubes 0.5/1.5/2 mL |
| 5022-6539 | Vial plate for 15 x 6 ml vials |
| 5023-1803 | Adapter female/male 10-32 to 1/4-28 SST |
| 5023-2255 | Splitter kit, 1-5ml/min, Analytical |
| 5023-2256 | Splitter kit 2-10ml/min, Analytical |
| 5023-2257 | Splitter kit 8-40ml/min,Preparative |
| 5023-2258 | Splitter kit 25-100ml/min,Preparative |
| 5023-2259 | Splitter kit 75-300ml/min,Preparative |
| 5023-2471 | Vial Rack 5×8 2ml |
| 5023-2512 | Adapter FB 1/4-28 to 10-32 |
| 5023-2875 | Fitting Adapter 10-32 F to 1/4-28 F SST |
| 5041-2166 | Peri pump tube PVC, 3-stop Pur/Pur 15/pk |
| 5041-2168 | Glass filter, solvent inlet |
| 5041-2184 | Peri pump tubes, Tygon 1.3mm id. 12/pk |
| 5041-2185 | Peri pump tubes, Tygon 2.8mm id. 12/pk |
| 5041-2191 | PTFE tubing for 8453 UV, 1.6mm od, 10m |
| 5041-2199 | Ferrules for flow cell 8453 sipper 10/pk |
| 5041-8339 | Glass filter, helium (10-16um pore size) |
| 5042-0922 | Inner sleeve for Carrier/Aux/Blend gas |
| 5042-0923 | Inner sleeve for Plasma gas line 5/pk |
| 5042-1330 | Multicell tubing kit 8453 UV Dissolution |
| 5042-1331 | Valve tubing kit, single bath 8453 Dis. |
| 5042-1332 | Dissolution probes 0.9 mm id for 8453 UV |
| 5042-1333 | Tubing kit for 8453 UV Sipper system |
| 5042-1334 | Sipper/sampler tubing kit for 8453 |
| 5042-1336 | Tubing, heat exchanger,FEP (8453 UV Vis) |
| 5042-1356 | Cassette Variable Pressure |
| 5042-4770 | Tee Joint (1mm) – Sample Introduction |
| 5042-4775 | Connector for gas line at end cap, 1/pk |
| 5042-4790 | O-Ring for vacuum chamber, Viton 1/pk |
| 5042-8507 | Peristaltic pump, silicone tubing |
| 5042-8544 | Plate for 24 tubes with 18mm diameter |
| 5042-8922 | u-Vacuum Degasser tubing kit |
| 5042-8952 | Seal keeper,ceramic,hipped |
| 5042-8954 | ChemSure tubing for peristaltic pump |
| 5042-8957 | Fingertight Polyketone fitting 1/16 10pk |
| 5042-9918 | Column clip set,eight colors |
| 5043-0065 | PVC Flexible Ducting 50mm-id SPS4, 5m |
| 5043-0269 | Adapter Profile for G1170A |
| 5043-1400 | Pump Head Holder |
| 5043-1412 | Reference Reflector (3EA) |
| 5043-1465 | Belt-long for column holder L |
| 5060-9055 | Tube, pressure check |
| 5060-9086 | Reference sample kit |
| 5061-3330 | AA, std 1nmol 10/PK |
| 5061-3331 | AA, standard 250PMOL 10/PK |
| 5061-3332 | AA, standard 100PMOL 10/PK |
| 5061-3333 | AA, std 25pmol 10/PK |
| 5061-3334 | AA, std 10pmol 10/PK |
| 5061-3335 | OPA reagent, 10 mg/ml, 6 ampoules |
| 5061-3337 | FMOC Reagent |
| 5061-3339 | Buffer, Borate 100ml/BT |
| 5061-3378 | Cable, Remote |
| 5061-3388 | Spacer for 1mm cell (8453 + Cary UV) 1/p |
| 5061-3389 | Spacer for 2mm cell (8453 + Cary UV) 1/p |
| 5061-3390 | Spacer for 5mm cell (8453 + Cary UV) 1/p |
| 5062-2465 | Support Ring |
| 5062-2478 | AA supplement, 1g ea N |
| 5062-2479 | Dithiodiproprionic |
| 5062-2484 | Gaskets wash seal 6/PK |
| 5062-2486 | Velocity regulator 3/PK |
| 5062-2494 | Piston seals 4/PK |
| 5062-8522 | Inlet tubing assembly |
| 5062-8524 | Inorganic anion test mixture |
| 5062-8530 | Cut-off filter 295 nm for 1046A/G1321A |
| 5062-8535 | Waste accessory kit |
| 5062-8544 | Silicone O-Ring 5pk |
| 5062-8562 | VALVE-CARTRIDGE |
| 5062-8587 | Piston Assembly 900ul 1100/1200 |
| 5062-8588 | Column identification RFID-tag 3/PK |
| 5063-6503 | OQ/PV Standards kit-1 for UV/VIS |
| 5063-6505 | Sieves (SS) for Outlet Valve 10/PK |
| 5063-6506 | Finger Caps 15/PK |
| 5063-6514 | CE Installation Qualification Kit |
| 5063-6515 | CE OQ/PV test kit |
| 5063-6520 | CE OQ/PV chemical kit |
| 5063-6522 | Tubing kit for UV-VIS OQ/PV Test 8453 UV |
| 5063-6523 | OQ/PV Hardware kit for 8453 UV-VIS |
| 5063-6524 | IQ Test Sample for UV-VIS |
| 5063-6526 | Column Clamp 6/PK |
| 5063-6586 | Sapphire Piston |
| 5063-6589 | Plunger seal for 1100/1200 and 1050 2/PK |
| 5063-6597 | Calibration Sample, 1g Glycogen |
| 5063-9153 | Odor element for oil mist filter (E2M18) |
| 5064-8012 | PFA sample tubing 0.5mm id, 1.6mm od, 5m |
| 5064-8013 | PFA sample tubing 0.3mm id, 1.6mm od, 5m |
| 5064-8016 | PTFE sample tubing 0.8mm id, 1.6mm od 5m |
| 5064-8017 | Tee Joint,ISIS |
| 5064-8018 | Cross Joint,ISIS |
| 5064-8019 | Union Joint, ISIS |
| 5064-8020 | PTFE sample tubing 2.0mm id, 3.0mm od 5m |
| 5064-8021 | PTFE Nut for 3 mm od tubing, 10/pk |
| 5064-8022 | Front+back ferrule, tubing od 3mm,10/pk |
| 5064-8023 | PTFE nut for 1.6mm od tubing, ISIS. 10/p |
| 5064-8024 | Front+back ferrule, tubing od 1.6mm,10/p |
| 5064-8026 | Tubing adapter for peri pump tubing 2/pk |
| 5064-8027 | Tubing clamps (small 10/pk + large 5/pk) |
| 5064-8032 | Wrench for Valve Maintenance,ISIS |
| 5064-8033 | Tag for tubing identification, 10/pk |
| 5064-8078 | Carrier gas line connector 4mm dia tube |
| 5064-8092 | Ar gas clean filter, Semicon App, 1/pk |
| 5064-8220 | Refrectrive Index Det OQ/PV Test Sample |
| 5064-8249 | Wear Retainer for SFC/SFE 10/PK |
| 5064-8293 | Sapphire piston assy, 2mm |
| 5065-4445 | Peristaltic pump for 1100/1200 Series LC |
| 5065-4493 | OQ/PV capillary for prep LC system, SS |
| 5065-4495 | 0.1 – 2.5 ml/min flow capillary kit |
| 5065-4498 | Extended PM kit 1100/1200 autosampler |
| 5065-4499 | Extended PM kit 1100/1050/1200 pumps |
| 5065-9952 | Peristalitic pump with ChemSure tubing |
| 5065-9972 | Biocompatibility Kt for 1100/1200 Series |
| 5065-9976 | 10ck of 10 clamps and micro clamps |
| 5065-9978 | 5m silicone Tubing, 1mm ID, 3mm OD |
| 5065-9981 | Solvent Cabinet for 1200 Infinity Series |
| 5067-1510 | Rail assy for Column organizer |
| 5067-1531 | Solvent Cabinet with 4 bottles |
| 5067-1539 | Rotor seal for 5063-6575 valve 8453 Dis. |
| 5067-1551 | 1260 Infinity LC in-line filter, 2.1mm |
| 5067-1553 | 1260 Infinity LC in-line filter, 4.6 mm |