河南东吉高科有限公司
安捷伦
| 5067-1555 | Replacement frits,2 mm,0.2um,10/pk |
| 5067-1557 | Ferrules, SS, 1/32in (0.8mm) ID, 6/pk |
| 5067-1558 | Fittings, SS, M4/4mm 0.8mm ID, 6/pk |
| 5067-1562 | Replacement frits,4.6mm,0.2um, 10/pk |
| 5067-1565 | MIXER-SHORT |
| 5067-1570 | SST Capillary 230 x 0.17 mm m/m p-s/p-s |
| 5067-1571 | SST Capillary 320 x 0.17 mm m/m p-s/p-s |
| 5067-1572 | Capillary ST 0.17×150 S/U6 |
| 5067-1582 | Inline Micro Filter kit, 0.5um, PEEK |
| 5067-1584 | Fitting with 0.5 um PEEK frit, 10/pk |
| 5067-1585 | PEEK fitting for use with 1/32in od 10pk |
| 5067-4111 | Rotor seal 8/9 selector valve high press |
| 5067-4113 | Stator/rotor seal 8/9 selector valve 400 |
| 5067-4124 | Shutoff valve |
| 5067-4144 | 2pos/10port micro Valve head 600bar |
| 5067-4148 | 2pos/6port BIO valve head |
| 5067-4174 | Valve head 8 pos/ 9 port 1200 Bar |
| 5067-4248 | Cap. Kit, 0.12mm, 8-column sel. PCHex |
| 5067-4279 | 4-Column Selector 800 bar |
| 5067-4282 | 2pos/6port Valve Head 800 bar |
| 5067-4283 | 2pos/10port Valve head 800 bar |
| 5067-4284 | 6-Column Selector 800 bar |
| 5067-4299 | Seal PE ATP |
| 5067-4601 | Solvent selection tubing kit, 4 solvents |
| 5067-4604 | SST Capillary 280×0.12mm ps/ps 1lg 1shnu |
| 5067-4605 | SST Capill. 280×0.12mm ps-ns 2lg 1sh nu |
| 5067-4606 | SST Capill. 400×0.12mm ps-ns 2lg 1sh nu |
| 5067-4607 | SST Capillary 280×0.17mm ps/ps 2long nut |
| 5067-4608 | SST-Capill. 280×0.17mm ps/ps 1lg 1sh nu |
| 5067-4609 | SSTCapillary 500×0.17mm ps-ns 2lg 1sh nu |
| 5067-4633 | Low dispersion capillary kit for G1316C |
| 5067-4634 | Valve rail assembly |
| 5067-4637 | SS-Capillary 30×0.12mm rigid wd ns 1sh |
| 5067-4647 | Capillary ST 0.12×340 S/SX |
| 5067-4648 | Capillary ST 0.17×700 SX/S |
| 5067-4649 | Capillary ST 0.12×90 SX/S |
| 5067-4650 | Capillary ST 0.12×150 SL/SX |
| 5067-4651 | Capillary ST 0.12×280 SL/SX |
| 5067-4652 | SST cap. 0.12mm ID 120mm pre-swaged |
| 5067-4653 | Capillary ST 0.12×200 SX/S |
| 5067-4655 | SST cap channel to valve 0.25x250mm |
| 5067-4656 | SST cap valve to press sensor 0.25x80mm |
| 5067-4657 | SST Cap. pump to sampler .17x300mm |
| 5067-4658 | SST Cap. pump to samplier .17x450mm |
| 5067-4659 | Capillary ST 0.12×340 S/S |
| 5067-4660 | Capillary ST 0.12×220 S/S |
| 5067-4661 | Tubing kit 270mm, 2/pk |
| 5067-4669 | Capillary ST 0.12×600 S/SL |
| 5067-4670 | SST cap. 0.17mm ID 600mm pre-swaged |
| 5067-4680 | ALS to Flex Cube tube 600mm 0.5mm ID |
| 5067-4697 | SSV bridge tube |
| 5067-4699 | 1290 Infinity pump service kit |
| 5067-4703 | Flex loop kit, 40 uL |
| 5067-4710 | Flex loop kit, 100 uL |
| 5067-4716 | Outlet valve for flush pump |
| 5067-4717 | Inlet valve for flush pump |
| 5067-4728 | Seal Cap Assembly |
| 5067-4730 | Capillary kit 0.17mmID G1316C 2/10 vlv |
| 5067-4735 | Capillary ST 0,12×130 SV/M |
| 5067-4744 | Capillary ST 0.12×340 SLV/M |
| 5067-4745 | Capillary ST 0.12×500 SLV/M |
| 5067-4746 | Capillary ST 0.12×250 SLV/M |
| 5067-4748 | Capillary ST 0.17×90 S-SX |
| 5067-4783 | Capillary ST 0.075mm x 340mm SV/SLV |
| 5067-4784 | Capillary ST 0.075mm x 220mm SV/SLV |
| 5067-4798 | Replacement Vacuum Chamber |
| 5067-5169 | AB assurance PM kit for G4226A sampler |
| 5067-5170 | AB PM Kit for G4226A sampler |
| 5067-5171 | AB PM Kit for G4220A/B pump |
| 5067-5172 | AB PM Kit for G1310B pump |
| 5067-5173 | AB PM Kit for G1311B pump |
| 5067-5174 | AB PM Kit for G1312B pump |
| 5067-5189 | Low Dispersion Kit 1290 Series |
| 5067-5378 | Inlet Tubing Kit |
| 5067-5380 | Tubing kit for vacuum repl.Chamber |
| 5067-5383 | Vacuum Chamber Replacement Kit – G1379B |
| 5067-5387 | Vacuum Chamber Replacement Kit-G1379A |
| 5067-5388 | Vacuum Tubing Kit for G1379A Degasser |
| 5067-5407 | In-line filter assy for 1290 quat-pump |
| 5067-5416 | Capillary ST 0.17×120 SX/S |
| 5067-5424 | 20ul Loop 2D-LC |
| 5067-5425 | 40ul Loop 2D-LC |
| 5067-5426 | 80ul Loop 2D-LC |
| 5067-5437 | 60ul Loop 2D-LC |
| 5067-5443 | Inlet tubing |
| 5067-5678 | Piston 1290 Infinity pump, ceramic |
| 5067-5708 | Online SPE Starter Kit Capillary Set |
| 5067-5710 | Online SPE Direct Inject. Capillary Set |
| 5067-5716 | Frit For 1290 Pump Outlet Filter 2/pk |
| 5067-5938 | Plunger Assembly ZrO2 Supported |
| 5067-5939 | Splitter-Capillary 0_05-ID L-1000mm |
| 5067-5941 | Splitter-Capillary 0.05-ID L-500mm |
| 5067-5975 | Plunger Assy Longlife Pumpheads |
| 5067-6131 | Bottle Head Seal Wash Kit |
| 5067-6137 | Tubing Connector Leak Kit |
| 5067-6149 | External Leak Sensor |
| 5067-6181 | Delay Coils for 15-40 mL/min |
| 5067-6189 | 1290 Infinity II inline filter (0.3um) |
| 5067-6197 | Seal Handling Device |
| 5067-6587 | Seal Sealwash PE ATP |
| 5067-6588 | Seal Sealwash PE Prep |
| 5067-6589 | Seal PE Prep |
| 5067-6605 | UIB Clamp Guide Infinity II Kit |
| 5067-6620 | InfinityLab Convenience Kit Bio-inert |
| 5067-6621 | InfinityLab Capillary Kit Bio-inert |
| 5067-6642 | Valve ATP Assembly |
| 5067-6652 | 1290 Infinity Service Kit for LL/EM PHs |
| 5067-6668 | Peristaltic-Pump Head |
| 5067-6697 | Method Dev.Cap Kit, 8 long columns, QCHE |
| 5067-6800 | Delay Coils for 4-8 mL/min |
| 5067-6801 | Delay Coils for 15-40 mL/min |
| 5067-6802 | Delay Coils for 40-80 mL/min |
| 5067-6804 | Delay Coils for 80-200 mL/min |
| 5067-6845 | Fitting Adapter coned 5/16-24M 10-32F ST |
| 5067-6849 | Column Holder Kit M |
| 5067-6871 | Solvent cabinet Infinity II (NCS) |
| 5067-7001 | Peristaltic Pump Assembly |
| 5068-0006 | Stator 2ps/6pt QC, P: C/D |
| 5068-0012 | Rotor 2pos/10port 1200Bar |
| 5068-0031 | 2 ul Capillary Loop (SST) |
| 5068-0032 | 5 ul Capillary Loop (SST) |
| 5068-0033 | 20 ul Capillary Loop (SST) |
| 5068-0034 | 50 ul Capillary Loop (SST) |
| 5068-0035 | 100 ul Capillary Loop (SST) |
| 5068-0051 | 10 ul Capillary Loop (SST) |
| 5068-0097 | Stator, 12pos/13 port Bio valve 200 bar |
| 5068-0099 | Rotor, 2 pos/6 port Bio valve 600 bar |
| 5068-0123 | Rotor 8 pos/9 Port Purge Valve, 1200 bar |
| 5068-0198 | Rotor 2ps-6pt-Valve 1300bar C72-16R6-AGT |
| 5068-0263 | Stator 4-Col. Sel QC, P: A/B |
| 5068-0264 | Rotor Seal 4-Col. Sel QC, PEEK, P: A/B |
| 5068-0268 | Rotor Seal, 6 Port Injector-Prep; 600bar |
| 5068-0319 | Re-Build Kit ManInject Prep |
| 5068-0320 | Stator Manual Injector |
| 5068-0321 | Stator Face ManInject Prep |
| 5068-0351 | Sample Loop StS 5ml 0.0625in |
| 5069-4524 | Water Filter Connector |
| 5080-8755 | Sample refinery gas 1 liter |
| 5080-8759 | TOGA Test Gas Sample 16oz (473mL)120psig |
| 5080-8768 | Low Boiling Point Calibration Sample No2 |
| 5080-8769 | Standard sample |
| 5180-4169 | O-Ring 12/PK, Fluoroelastomer, 0.176inID |
| 5181-1246 | Dissolution filter, 1/8in probe, 1000/pk |
| 5181-3311 | Washer, spring 10/PK |
| 5181-3389 | Outlet splitter |
| 5181-3390 | Fixed inlet splitter 0.22mm id |
| 5181-3391 | Fixed inlet splitter 0.32mm id |
| 5181-3392 | Fixed inlet splitter 0.53mm id |
| 5181-8837 | Packed injection port kit |
| 5181-8863 | Source cleaning kit |
| 5182-0775 | Trap, VOCARB 3000, 7695 and 3100 P+T |
| 5182-0796 | 25ml Fritless Sparger Kit |
| 5182-0845 | 25ml Sparger Kit |
| 5182-0846 | 5ml Frit Sparger Kit |
| 5182-0849 | 25ml Fritless Sparger (Glassware Only) |
| 5182-0850 | 5ml Fritless Sparger (Glassware Only) |
| 5182-0851 | 25ml Frit Sparger (Glassware Only) |
| 5182-0852 | 5ml Frit Sparger (Glassware Only) |
| 5182-0946 | Frit spgr kit w/fitting, 5 mL Stat & Vel |
| 5182-2581 | CBL-ASSY Multi-COND DB9 M-M 26AWG 15-ft |
| 5182-3477 | TCD Back Ferrule for 1/8in inlet 10/PK |
| 5182-9652 | S/SL Gold Seal Disk with Cross |
| 5182-9673 | TCD Frnt Ferr for 0.53mm id col 10/PK |
| 5182-9676 | TCD Frnt Ferr for 0.32mm id col 10/PK |
| 5182-9677 | TCD Frnt Ferr for 0.25mm id col 10/PK |
| 5182-9679 | TCD Front Ferrule, no hole 10/PK |
| 5182-9722 | 6890 NPD Ceramic Insulator/Metal Seal KT |
| 5182-9748 | PTFE guide for SLH, 10/PK |
| 5182-9753 | Empty inserts with one swirl hole 10/PK |
| 5182-9754 | Graphpack-2M connector 0.2mm |
| 5182-9757 | VAlve body for SLH |
| 5182-9758 | Spring for SLH |
| 5182-9759 | Kalrez seal for SLH |
| 5182-9760 | Sealing element for SLH |
| 5182-9761 | Graphpack-2M connector 0.32/0.25mm |
| 5182-9762 | Graphpack-2M connector 0.53mm |
| 5182-9763 | Silver seal 5/PK |
| 5182-9775 | Viton Seal for SLH Septumless Head 5/PK |
| 5183-0362 | Declaration of Conformity |
| 5183-2096 | HP5973 w/Diffusion Pump 1 Yr Maint Kt |
| 5183-4649 | Crossover Ethertwist Cable, 10ft |
| 5183-4652 | MIcro GC Replacement Filters 5/PK |
| 5183-4736 | Sparger 5ml Frit for 3000/2000/7695 |
| 5184-3517 | GC/MS Checkout Standards Kit |
| 5188-1447 | Trap, U Shape Tenax Stamp 1A |
| 5188-2791 | Trap,Tenax/Silica gel/char 12inx18in No3 |
| 5188-5241 | S/SL Insulation Kit, 3 Pieces |
| 5188-5244 | Response Linearity Standard, 3×1 mL amp |
| 5188-5245 | FPD Sample |
| 5188-5347 | OFN NCI Checkout standard 100 fg/uL |
| 5188-5348 | OFN EI Checkout standard 1 pg/uL |
| 5188-5357 | PFHT – HighMass Checkout Sample |
| 5188-5367 | Gold Plated Inlet Seal with Washer |
| 5188-5372 | FID MDL test sample 3×0.5 ml ampoules |
| 5188-5953 | FPD Check Out Sample, Meth. Parathion |
| 5188-6493 | QuickPick Split Inlet PM Kit |
| 5188-6494 | QuickPick Splitless Inlet PM Kit |
| 5188-6495 | Split vent trap PM kit,single cartridge |
| 5188-6496 | QuickPick Split Vent + Inlet PM Kit |
| 5188-6497 | QuickPick Splitless Inlet/Vent PM Kit |