河南东吉高科有限公司
安捷伦
| G1375-87400 | SST capillary 280×0.17mm, 1/16in fitting |
| G1376-60003 | BOttle head assembly for u-LC system |
| G1376-60015 | Support ring for cap/nano/SFC pump |
| G1376-68707 | Extended flow range kit (100 ul/min) |
| G1376-68710 | PM kit for G1376A Capillary Pump |
| G1377-44900 | tool for Micro Seat Capillary Mounting |
| G1377-60002 | Seal support assy |
| G1377-60012 | Seal support back up assy for G1367D |
| G1377-60023 | Micro analytical head for G1367D |
| G1377-87000 | Seat Assy Micro WPS (100um ID cap.) |
| G1377-87001 | Seat Assy Micro WPS (75um ID cap.) |
| G1377-87002 | Seat Assy Micro WPS (50 um ID cap.) |
| G1377-87101 | Seat assy for G1377 u-well plate sampler |
| G1377-87201 | Needle assy G1377A u-well plate sampler |
| G1377-87300 | Loop capillary, 40ul for G1377A |
| G1377-87301 | SST capillary, 0.25mm id, 13cm long |
| G1377-87310 | Loop capillary 40uL for G1367D |
| G1379-67310 | u-Vacuum degasser tubing kit |
| G1512-60530 | Y-Cable, G1512A, 5890A, APG Remote |
| G1530-60560 | Signal cable, general purpose, 6 pins |
| G1530-60570 | Cable Assembly, 6890A to 3396 |
| G1530-60590 | Cable, 6890, ext. events |
| G1530-60930 | Cable, GC Remote, 9M/9M |
| G1530-80650 | Exhaust deflector assy |
| G1531-20690 | FID Collector body |
| G1531-20700 | FID Collector Insulator |
| G1531-21090 | Hastelloy Collector Body |
| G1531-60680 | Igniter Cable Assembly |
| G1531-60690 | FID collector assembly |
| G1531-67000 | Maintenance Kit, FID Cleaning |
| G1531-67001 | Maintenance Kit, FID Rebuilding |
| G1532-20710 | 6890 TCD Packed Column Adapter |
| G1532-60675 | TCD Replacement Cell 6890 |
| G1532-60685 | TCD Cell 6890 |
| G1532-80540 | Adapter Weldment |
| G1533-80565 | 6890 ECD Make-up gas adapter |
| G1534-20530 | NPD Collector Funnel |
| G1534-40020 | Insulator, NPD Upper |
| G1534-40030 | Insulator, NPD Lower |
| G1534-60570 | NPD white bead assembly |
| G1535-60600 | FPD IGNITOR CABLE |
| G1544-20590 | Retaining nut |
| G1544-60575 | Split/Splitless Insert 6890 EPC |
| G1544-60585 | S/SL Insert Weldment Uses Large Filter |
| G1544-80530 | GC Split Vent Replacement Cartridge,2/pk |
| G1544-80550 | Split trap assembly (6890) |
| G1544-80580 | S/SL Insert Weldment, for use with ECD |
| G1545-80530 | PCOC 530um Septum Nut |
| G1580-60060 | CPM-1/16×0.010inID Tube Assy, 50cm, Iner |
| G1580-60585 | Insert Weldment, valved system w/filter |
| G1580-61060 | Micro Fluidics 1/16in x 0.010 Union Kit |
| G1580-80060 | CPM-1/16in x 0.010in ID Tube x 50cm |
| G1580-80062 | CPM-1/16in x 0.20in ID Tube x 50cm |
| G1600-60002 | Capillary cassette |
| G1600-60007 | Electrode assembly |
| G1600-60013 | Capillary cassette for CE/MS |
| G1600-60027 | HP 3D CE High Sensitivity cell-replace |
| G1600-60150 | Alignment interface 25um |
| G1600-60210 | Alignment interface for std cap 50um id |
| G1600-60230 | Alignment intrfc light path cap 50um id |
| G1600-60310 | Alignment interface for std cap 75um id |
| G1600-60330 | Alignment intrfc light path cap 75um id |
| G1600-62402 | Plastic Screw for CE 10/pk |
| G1600-63200 | CE Cell Fitting Kit |
| G1600-67201 | Pre-puncher |
| G1600-67220 | CE-MS PVA capillary w/o window |
| G1600-67312 | CE-MS fused silica capillary w/o window |
| G1600-68723 | High Sensitivity Cell Kit for HP 3DCE |
| G1607-20030 | Gasket |
| G1607-60041 | ES needle assembly for CE-MS |
| G1680-63720 | USB 2.0 Cable (10 ft.) |
| G1811-23200 | Beveled edge needle for G1811A |
| G1820-60160 | Sample line connector for concentric neb |
| G1820-65008 | PTFE tubing for carrier/makeup gas, 1m |
| G1820-65009 | PFA sample tubing kit(0.5mm id,1.6mm od) |
| G1820-65027 | Connectors for Plasma + Aux. gas, 1 ea |
| G1820-65052 | Carrier gas line connector for conc. neb |
| G1820-65075 | O-Ring kit, concentric neb. ICP-MS, 1/pk |
| G1820-65105 | PFA sample tubing, 0.5mm id,1.6mm od,5m |
| G1820-65435 | Screws for Skimmer Base (4/pk) |
| G1820-65478 | PFA sample tubing, 0.3mm id,1.6mm od,3m |
| G1820-65505 | Drain tank for organic solvent, 2L. 1/pk |
| G1820-65515 | Tubing for Drainage (4.0mm id, 2.5m) |
| G1820-65526 | Tubing w/guide 0.15 id, 1.6 od, 70cm 5/p |
| G1820-65527 | Tubing w/guide 0.2id, 1.6od, 70cm, 5/pk |
| G1820-65531 | Tubing w/guide 0.3id, 1.6od, 70 cm, 5/pk |
| G1820-65533 | Ferrule + O-ring kit for carrier gas 1/p |
| G1820-65541 | Basic LC connection kit |
| G1820-80341 | Ar Gas Filter |
| G1820-81012 | Body Tube assembly (Penning gauge) |
| G1820-81013 | Electrode kit for Penning Gauge |
| G1833-65332 | O-rings for vent valve, Viton 2/pk |
| G1833-65404 | Polishing paper kit 5 shts No.400+1200 |
| G1833-65572 | PFA sample tubing 0.15 id, 1.6 od, 70 cm |
| G1833-65573 | PFA sample tubing,0.2 id,1.6 od,70cm,3/p |
| G1833-65577 | PTFE tape for peristaltic pump |
| G1833-65583 | Neb gas line connector Microflow, 1/pk |
| G1833-65592 | Extraction lens 1 for s-lens for ICP-MS |
| G1833-65593 | Extraction lens 2 for s-lens for ICP-MS |
| G1833-66011 | Alignment Plate for RF Coil, ICP-MS |
| G1833-67024 | Strainer for cooling water |
| G1888-60701 | Headspace Leak Test Kit |
| G1888-60702 | G1888A PM Kit with 1-mL Loop |
| G1888-60703 | G1888A PM Kit with 3-mL Loop |
| G1946-20087 | Skimmer 2 |
| G1946-20089 | Skimmer 1 |
| G1946-20157 | ESI Spray Shield |
| G1946-20213 | Ferrule, Nebulizer, Polyimide + Graphite |
| G1946-20274 | Flanged Needle Holder |
| G1946-20301 | H.T. Capillary cap |
| G1946-60157 | LCMS TOOL KIT |
| G1946-67037 | Tested APCI Nebulizer Assembly |
| G1946-67098 | Tested ESI Nebulizer Assy |
| G1946-67260 | Microflow Nebulizer Assy |
| G1946-68702 | APCI Nebulizer Accessory Kit |
| G1946-68703 | ESI Nebulizer Accessory Ship Kit |
| G1946-68704 | APCI Needle Replacement Kit |
| G1946-85020 | Delay Sensor Calibration Kit |
| G1946-85021 | 5M Ammonium Formate Solution |
| G1947-20029 | Corona Needle APCI, 1 each |
| G1958-20050 | AJS Spray Shield, Small |
| G1958-60137 | Nebulizer(needle SST316 replacement) kit |
| G1958-67098 | ES Tested Nebulizer, Support Assy |
| G1960-20030 | APCI Needle |
| G1960-20032 | ESI Needle |
| G1960-20033 | Microflow Neb Needle |
| G1960-20310 | Narrow Bore Capillary Cap |
| G1960-67100 | Universal Inlet Filter Replacement Kit |
| G1960-67470 | Nebulizer Adjustment Kit |
| G1960-80060 | Capillary, FS, 0.6MM |
| G1960-80103 | Low Gain CEM Replacement, LCMS |
| G1964-20028 | 0.8mm ID Capillary Cap 6495C |
| G1964-20050 | AJS Spray Shield, Multi Bore |
| G1964-80112 | Capillary, 1.2mm ID x 90 |
| G1964-80659 | Capillary, 6 x 0.61mm x 90mm, 1G |
| G1969-85000 | ESI-L Low Concentration Tuning Mix 100ml |
| G1969-85001 | API-TOF Reference Mass Solution Kit |
| G1969-85003 | ESI TOF Biopoly. Anlys Ref. Mass Std Kit |
| G1969-85020 | MMI-L Low Concentration Tuning Mix |
| G1972-60025 | Target Plate for AP-MALDI LC/MS |
| G1978-60060 | MMI Spray Shield |
| G1978-85000 | ESI/APCI LC Demo Kit |
| G1982-20111 | End Cap, Nano |
| G1982-85001 | Chip Cube High Mass Reference Std |
| G1982-85002 | Chip Cube High Mass Solvent Std |
| G1982-85003 | Chip Cube Low Mass Reference Std |
| G1999-20021 | 5973 Gold Fil Screw (M2 X 0.4 10MM-LG) |
| G1999-20432 | 73CI Repeller |
| G1999-20443 | 73CI ION Focus Lens |
| G1999-20446 | 73CI Drawout Plate |
| G1999-60412 | 73CI Interface Tipseal |
| G2037A | MALDI-TOF Alpha-CHC Acid Matrix Kit |
| G2258-23101 | Piston guide, PEEK for G2258A ALS |
| G2258-23201 | Frit Adapter, PTFE for 18in od tubing |
| G2258-60002 | Buffer loop extension assy for G2258A |
| G2258-60003 | Piston for G2258A Dual Loop ALS, 5 mL |
| G2258-60111 | Tray Well Plate Autosampler |
| G2258-68710 | Needle Kit for G2258A Dual Loop ALS |
| G2258-87102 | Twin needle seat assy for G2258A |
| G2258-87300 | Buffer Loop Tubing Assy, PTFE |
| G2258-87301 | Capillary inj valve to preparative head |
| G2258-87307 | Drawing Tube Assy for flush solvent |
| G2258-87310 | Waste tube, 0.8 mm id, 15 cm long |
| G2258-87312 | Front seat tube PTFE 0.25mm id 10cm long |
| G2258-87313 | Back seat tube PTFE 0.25mm id 12 cm long |
| G2258-87314 | Tubing assy, solvent flush for G2258A |
| G2258-87315 | Back Seat Tube, SST 0.5 mm id 12 cm long |
| G2258-87316 | Front seat tube SST 0.5 mm id 10 cm long |
| G2260-68711 | 5ml Multi draw loop for use with G2260A |
| G2260-87101 | Needle seat for G2260A autosampler |
| G2260-87201 | NEEDLE-ASSY-HF |
| G2260-87300 | Capillary sampler to column, SST |
| G2260-87301 | Capillary pump to sampler,SST40cm,0.50mm |
| G2350-61090 | Discharge Tube Kit for G2350 |
| G2397-20540 | MICRO ECD MIXING LINER |
| G2397-80520 | Micro ECD Mug Adapter |
| G2421-60001 | ESI Tuning Mix |
| G2425A | APCI Negative Ion Performance Standard |
| G2427A | API-ES Nebulizer needle (ea) |
| G2428A | APCI Nebulizer Needle (ea) |
| G2431A | ESI Tuning Mix for Ion Trap |
| G2440-60200 | Ceramic Channel Electron Multiplier AY |
| G2441-80010 | Electron Multiplier Ceramic Channel |
| G2571-67001 | Canted Coil Spring 8.9mm-OD |
| G2571-80103 | Electron multiplier horn, high gain |
| G2581-80875 | TS800 Tip Seal Replacement Kit |
| G2589-20043 | Ultra Ion Source Chamber |
| G2589-20044 | Repeller, 5975 |
| G2589-20045 | Drawout Plate, 6mm, inert, 5975/5973 |
| G2589-20100 | Drawout Plate, 3mm, for inert source |
| G2589-20101 | Inert Source Washer |
| G2617-60507 | PTV Septumless head, 6890 |
| G2617-80550 | PTV COL ADAPTER TUBE |
| G2630-60710 | Oven exhaust deflector for 6850 |
| G2855-20530 | Internal Nut,CFT Capillary fitting |
| G2855-20532 | Internal nut, CFT 1/16inch SS fitting |
| G2855-20590 | Column storage fitting |
| G2855-60200 | Ferrule Pre-Swage Tool,Capillary Flow |
| G2855-60570 | Plug for microfluidic manifold or unions |
| G3138-65117 | Rotor Seal for Valve,ISIS |