河南东吉高科有限公司
Waters
| 700005187 | APGC Ion Chamber Corona Cap |
| 700009541 | Gasket, Thin, APH, CM-S |
| 700005182 | Nut and Ferrule, PEEK, 1/16 in |
| 700009540 | Retainer Clip, CM-S Trough, APH |
| WAT007571 | PicoTag Sample Tubes, 6 x 50 mm, 72/pk |
| 700000558 | Sample Loop, 5 µL |
| 700000557 | 2790/2795 Holding Loop, 3000µL |
| 700000556 | 2790/2795 Holding Loop, 500µL |
| WAT058955 | Manifold Gasket, top. 1/pk |
| 700009506 | Support Sleeve, Fountain Wash PPS |
| 700009505 | Cup, Overflow |
| WAT058942 | Plate manifold reservoir tray 25/pk |
| WAT021693 | Filter Assembly, Inert |
| 6071228 | NW25 Centering Ring, Optical Baffle |
| WAT031005 | Plunger Assembly 500µL |
| M880607BD1-S | Pumping Tube |
| 700001894 | Diverter Valve |
| 430001086 | Needle Guide Tube |
| 5314042-S | Screw, M1.6 x 5, Ch Hd, SS, 20/pk |
| WAT075490 | O-Ring, Filter, Viton |
| 6071223 | Swing Clamp, NW25 |
| 6071221 | NW25 Centering Ring |
| 6071220 | Ring Clamp, NW32/40 |
| 6071217 | NW16 to NW10 Centering Ring |
| WAT023401 | O-Ring, Kalrez, 2/pk |
| WAT058956 | Plate manifold white gasket 1/pk |
| M802694AD1 | Ion Exit Plate (EI) |
| M802694AD2 | Ion Exit Plate (CI) |
| 410003946 | Microfilter, precolumn, 2µm, SS, 1/16 in |
| 400001417 | Mounting Bracket, Wash Pump |
| WAT082823 | Gradient Proportioning Valve |
| 700003602 | Delay Coil,100-150mL, 10000:1, .062 x580 |
| 700003603 | Delay Coil, 0.5-2mL, 15:1, .010 x 240 |
| 700003604 | Delay Coil, 2-8mL, 100:1, 0.020 x 250 |
| 700000579 | Screw, Grub, M3 x 3, 20/pk |
| 700003600 | Delay Coil, 8-30mL, 5000:1, 0.030 x 500 |
| 700003601 | Delay Coil, 30-100mL, 5000:1, .040 x 725 |
| WAT052120 | Plunger Bearing LC2000 |
| 700000555 | 2790/2795 Holding Loop, 128µL |
| WAT078793 | Rear Terminal Strip |
| WAT052147 | Fraction Selector/Funct. Valve, SS 8-Way |
| 700003615 | Solvent Bottle Filter |
| 700003616 | Solvent Bottle Filter, 7/pk |
| 5711020-S | O-Ring, Viton, BS009, 5/pk |
| 5311043-S | Screw, M2 x 6, Csk |
| WAT024934 | Inlet Manifold Luer Fitting |
| 205001197 | Leak Sensor, Long |
| M702971AD1-S | Ferrule, Special, AutoSpec Interface |
| 700000563 | Sample Loop, 2000 µL |
| 700000562 | Sample Loop, 500 µL |
| 700001897 | O-Ring, Encapsulated Viton, AS214 |
| 700000561 | Sample Loop, 100 µL |
| 700000560 | Sample Loop, 50 µL |
| 700000559 | Sample Loop, 20 µL |
| WAT079794 | Tubing, Tygon, 2 ft |
| 430001121 | Tubing Assembly, Transducer to Check Valve |
| 430001120 | Tubing Assembly, Pump Head to Transducer |
| 430002476 | Tubing Assembly, Transducer – Vent Valve, MP35N |
| 430002477 | Tubing Assembly, Vent Valve P2 to Filter, MP35N |
| 430002474 | Tubing Assembly, Degasser to GPV, MP35N |
| 430001199 | Tubing Assembly, Accumulator B Transducer to Vent Valve |
| 6395995-S | Tubing, SS, 1/8 in x .085 in |
| 6436010-S10 | Tubing, PEEK, 1/16 in x .030 in, 10 m, Green |
| 430002483 | Tubing Assembly, GPV-C to Mixer, MP35N |
| 430002484 | Tubing Assembly, GPV-D to Mixer, MP35N |
| 430002481 | Tubing Assembly, GPV-A to Mixer, MP35N |
| 430002482 | Tubing Assembly, GPV-B to Mixer, MP35N |
| 6070795 | Elbow, Micro |
| 700000212 | Syringe, 2.5 mL |
| 700004798 | Tubing Kit, GPV, 2535Q |
| 2320 | Tubing, Silastic, 3/8 in OD x 3/16 in ID Pump |
| 6070705-S | Elbow, Red Button Cover |
| 700009642 | ESI Probe Assembly, 500 mm x 100 µm |
| 700009641 | ESI Probe Assembly, 250 mm x 100 µm |
| 700005281 | Syringe, 25 µL, Gauge 22S, 62mm needle |
| 7020302-S | Spacer, Insulating , Ceramic, 2 mm, 5/pk |
| 700001710 | Tubing Assembly, Sample Inlet |
| 6070283-S5 | Tubing, FEP, 12 mm OD, 5m |
| 700000387 | Elbow, Drain, Wash Housing |
| 6070802 | Nut, Female, Swagelok, 1/4 in |
| S100343AD6-S | Spacer, Insulating, 12 mm |
| 6070807 | Nut, Swagelok, 1/8 in |
| 430002517 | Tubing Assembly, T1, QSM to V2 port 5 |
| 430002519 | Tubing Assembly, T4, V4 port 3 to SPE2 Col |
| 289004442 | Tee, MMV, nano |
| 700006549 | Valve, Needle 3 Way, 1/8 in A Fittings |
| 700002181 | Tubing, Pharmed, 1/4 in OD X 1/8 in ID, 5 feet |
| S100009AD5-S | Spacer, Insulating, 5 mm |
| 205000494 | Column Stabilizer Kit, 150 mm |
| 205000489 | Column Stabilizer Kit, 50/100 mm |
| 700011035 | Vacuum Hose, 25 mm x 5 m |
| 700003415 | Male Connector, 12 mm |
| 700004780 | Clamp, 30 mm |
| 415000221 | Fitting, 1/4 in Barbed to 1/8-27 NPT |
| 700004779 | Clamp, 19 mm |
| 430001221 | Tubing Assembly, Inject Out to HPLC Column |
| 700004776 | Clamp Bracket, 30-50 mm |
| 700004777 | Clamp, 50 mm |
| 700004778 | Clamp Bracket, 19 mm |
| 430001229 | Tubing Assembly, M/S Inlet (red) |
| 7020142-S | Spacer, Metal, 4 mm, 5/pk |
| 700002112 | Allen Wrench, 1.5 mm |
| 430001207 | Tubing Assembly, Vent Valve P5 to Tee/Filter |
| 430001209 | Tubing Assembly, Vent Valve P1 To Waste |
| 700003421 | Syringe, 25 mL, XLP |
| 430001208 | Tubing Assembly, Vent Valve P2 to Tee/Filter |
| 700000395 | Syringe Drive Assembly, 2795 |
| 700000396 | Tubing Assembly, Inline Filter to Injector |
| 6060726-S1 | Tubing, PTFE, 1/16 in x .032 ID, 1 m |
| WAT025153 | Syringe, 10CC, Plain |
| 430001210 | Tubing Assembly, Vent Valve P4 To Waste |
| 6060765-S | Tubing, Nylon, 10 mm OD, White |
| 430002520 | Tubing Assembly, T5, V3P4 to V3P6 & V4P4 to V4P6 |
| 700003438 | Syringe, 10 mL, XLP |
| 430002521 | Tubing Assembly, T6, V3 port 5 to V2 port 4 |
| 700003434 | Syringe, 500 µL, XLP |
| 700003435 | Syringe, 1 mL, XLP |
| 430002522 | Tubing Assembly, T7, V3 port 2 to V1 port 5 |
| 700003436 | Syringe, 2.5 mL, XLP |
| 700004761 | PEEK Tubing, 1/32 in x .015 x 1 m |
| 700000399 | Tubing Assembly, Wash Valve to Needle Wash |
| 430001200 | Tubing Assembly, Accumulator A Transducer to Vent Valve |
| 430001256 | Tubing Assembly, Right Hand Inlet |
| 430001255 | Tubing Assembly, Right Hand Outlet |
| 430001258 | Tubing Assembly, Transducer to Mixer |
| 430001257 | Tubing Assembly, Tee to Transducer |
| 430001259 | Tubing Assembly, Mixer to Reference Valve |
| 430002583 | Tubing Assembly, Primary Out Transducer to Check Valve, MP35N |
| 430001266 | Tubing Assembly, Transducer to Reference Valve |
| 430001269 | Tubing Assembly, Degasser to Pump A |
| 430001268 | Tubing Assembly, Degasser to Pump B |
| 700003437 | Syringe, 5 mL, XLP |
| 700009572 | Compression Screw, 10-32, 1/4 Hex SS, Gold-plated |
| 430001243 | Tubing Assembly, Mixer to Reference Valve |
| 430001242 | Tubing Assembly, Reference Valve to Waste |
| 430001244 | Tubing Assembly, Vent Valve to Waste |
| 430001249 | Tubing Assembly, Vent Valve to Column |
| 430002578 | Tubing Assembly, T3, V4 port 1 to SPE1 Col |
| WAT055858 | Tubing Kit, Low Volume, PEEK |
| 4086001BC2-S | Cable, 5m FTP CAT5 crosswired LAN Communication |
| 430001254 | Tubing Assembly, Left Hand Outlet |
| 430001253 | Tubing Assembly, Left Hand Inlet |
| 700008870 | Tubing Assembly, I-Class CM-A, Low Pressure, .003 SS, 14.5 in |
| WAT088561 | Tubing, 0.009 in (0.23 mm) I.D. X 3 ft (0.9 m) Length , ETFE |
| WAT088563 | Tubing ETFE .062 in OD x .040 in ID x 36 in |
| 700001657 | Tubing, Inlet to Diverter, 0.040 in |
| 700001656 | Tubing, Inlet to Diverter, 0.010 in |
| WAT022998 | Tubing, 1/16 in (1.6mm) O.D. x .020 in ID x 5 ft (1.6mm OD x .508 mm ID x 1.5m), PEEK |
| WAT022997 | Tubing, 1/16 in (1.6mm) O.D. X 0.015 in (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK |
| WAT078565 | Tubing Assembly, V1 to V2 |
| WAT055886 | Tubing Kit, Low Volume, Stainless Steel |
| WAT055872 | Tubing Kit, Standard Volume, PEEK |
| WAT057461 | Flowcell, Inert (Titanium) Cell Assembly, 10 mm |
| WAT057462 | Flowcell, Microbore, 3 mm |
| WAT057463 | Flowcell, Semi-Prep, 3 mm |
| 430000856 | Syringe, 2.5 mL, PAL Dilutor |
| 430000859 | Syringe, 10 µL |
| 430000858 | Syringe, 10 mL, PAL Dilutor |
| 700000961 | Elbow, Male, 4 mm x M5 |
| S100435AD1-S | Spacer, Ceramic, 12 mm |
| 700003185 | Male Connector, 3/8 in – 10 mm |
| 430000865 | Syringe, 250 µL |
| 430000868 | Syringe, 2500 µL |
| 430000867 | Syringe, 1000 µL |
| 700004482 | Nut, PEEK, 1/4-28, 3/pk |
| 430000869 | Syringe, 5000 µL |
| WAT027629 | Syringe, 10 mL, Safety |
| 417000149 | 6-port Cheminert Injection Valve, 0.4 mm, PEEK |
| 186003524 | Solvent Filter, GHP, 47 mm, 0.2 µL, Aqueous, 100/pk |
| 700008869 | Tubing Assembly, I-Class CM-A, High Pressure, .003 SS, 14.5 in |
| WAT057460 | Flowcell, Analytical High Pressure, 10 mm |
| 205000118 | Fraction Collector 25 mm Rack Kit |
| 205000117 | Fraction Collector 16 mm Rack Kit |
| 205000116 | Fraction Collector 13 mm Rack Kit |
| 205000115 | Fraction Collector 18 mm Rack Kit |
| 417000148 | 6-port Cheminert Injection Valve, 0.4 mm |
| 430000861 | Syringe, 25 µL |
| 430000864 | Syringe, 100 µL, low dead volume |
| 417000146 | 6-port Cheminert Injection Valve, 0.25 mm |
| 430000863 | Syringe, 100 µL |
| 430000866 | Syringe, 500 µL |
| 430001389 | Tubing Assembly, Solvent Inlet (Aux. Pump only) |
| 205000163 | Two-Column Regeneration Valve Kit |
| WAT037047 | Tubing Kit, Prep-Funnel |
| 700001362 | Fuse, 10A (T), 1.25 in, Fast Acting |
| S100009AD4-S | Spacer, Insulating, 3 mm |
| 700004412 | Plug, Teflon, 1/4 – 28 |
| 430001346 | Tubing Assembly, Vent Valve Port 5 to Filter |
| 205000119 | Fraction Collector 28 mm Rack Kit |
| 205000108 | Tube Holder Kit, 13 mm |
| WAT053956 | Tubing Assembly, Waste |
| 205000186 | Syringe, 1000 µL, Kit |
| 700003925 | Needle, Air, 80 mm, black |
| 700003921 | Needle, Air, 50 mm, yellow |
| 205000187 | Syringe, 2500 µL, Kit |
| 205000185 | Syringe, 500 µL, Kit |
| 205000184 | Syringe, 250 µL, Kit |
| 205000188 | Syringe, 5000 µL, Kit |
| 700003922 | Needle, Air, 56 mm, red |
| 700003923 | Needle, Air, 68 mm, blue |