
备件
P/N: | Product Description |
200400.001 | Replacement 5 mm diameter light guideNote: For HR x0, ARES and AR UV-Curing and Photo-Curing Options. |
200974.002 | SER3 and SER2 Standard Drum Pair for HR x0, DHR & AR |
200975.002 | SER3 and SER2 Knurled Surface Drum Pair Set for HR x0, DHR & AR |
200976.002 | SER3 and SER2 Rough Surface Drum Pair Set for HR x0, DHR & AR |
200977.002 | Securing Clamps for HR x0, DHR & AR SER3/2 and ARES-G2 SER3 (pkg. of 6) |
200978.001 | SER3 and SER2 Dual Blade Cutter Assembly |
200979.001 | Razor Blades for SER3 and SER2 Dual Blade Cutter Assembly (pkg. of 50) |
201261.001 | DSR Standard N2700000SP Standard Oil |
202610.003 | Low Temperature Circulator Polyscience LS5 model 120V 60Hz for use with Upper Peltier PlateNote: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). |
202610.003 | Low Temperature Circulator Polyscience LS5 model 120V 60Hz for use with Upper Peltier PlateNote: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). |
202611.003 | Low Temperature Circulator Polyscience LS5 model 240V 50Hz for use with Upper Peltier Plate Note: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). |
202611.003 | Low Temperature Circulator Polyscience LS5 model 240V 50Hz for use with Upper Peltier Plate Note: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). |
203135.001 | HR x0, DHR MMA Objective 20X Short Working Distance |
203170.001 | HR x0, DHR MMA Objective 50X Short Working Distance, Oil |
203171.001 | HR x0, DHR MMA Objective 100X Short Working Distance, Oil |
203183.001 | HR x0, DHR MMA Objective 40X Long Working Distance |
203273.001 | HR x0, DHR MMA Objective 20X Long Working Distance |
203274.001 | HR x0, DHR MMA Fluorescence Splitter |
203305.001 | HC-30 UPP Low Temperature Circulation Fluid (pkg. of 1) |
203330.001 | Keysight E4980AL-102 LCR MeterNote: For HR x0, DHR and ARES-G2, RSA-G2 DETA: frequency range: 20Hz to 1MHz; AC test signal (potential) 0.001 to 2 Volts (115/230VAC; 50/60Hz). |
203347.001 | Julabo Fluid Circulator, Wide Range (115VAC/60Hz) |
203348.001 | Julabo Fluid Circulator, Wide Range (230VAC/50 Hz) |
203349.001 | Thermal C5 Low Temperature Circulator Fluid (-35 °C to 110 °C) |
203350.001 | Thermal C20S High Temperature Circulator Fluid (0 °C to 200 °C) |
203854.901 | Koolance Peltier Circulator Fluid (-10 °C to 100 °C, pkg. of 1) |
203854.902 | Koolance Peltier Circulator Fluid (-10 °C to 100 °C, pkg. of 4) |
206442.001 | Hioki LCR Meter IM3536Note: For use with Rheo-Impedance Spectroscopy Accessory (534855.901), or Dielectric Accessory (546601.901). |
250000.001 | HR x0, DHR & AR Rheometer Filter/Regulator |
250024.001 | Low Viscosity Standard Oil (S60) ~ 100 mPa.s (cP) @ 25 °C |
250024.002 | High Viscosity Standard Oil (S600) ~ 1100 mPa.s (cP) @ 25 °C |
270323.007 | High Temperature O-Ring for SST Double Gap Concentric Cylinder Cup |
270323.008 | High Temperature O-Ring for SST Standard Concentric Cylider Cup withCap |
271902.001 | HR x0, DHR Double Wall Ring (DWR) Interfacial Exchange Cell Syringe Pump |
271904.001 | HR x0, DHR Rheo-Raman Objective 20X Long Working Distance |
272004.001 | HR x0, DHR Rheo-Raman Optical Table |
402046.901 | AutoPilot Option for TRIOS Software |
402491.901 | HR x0, DHR, ARES-G2, Stainless Steel, 20 mm, Quick Change Plate |
402492.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 20 mm, Quick Change Plate |
402493.901 | HR x0, DHR, ARES-G2, Hard Anodized Aluminum, 20 mm, Quick Change Plate |
402494.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 20 mm,Quick Change Plate |
402611.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 8 mm, Quick Change Disposable Plate (pkg. of 20) |
402612.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 20 mm, Quick Change Disposable Plate (pkg. of 20) |
402613.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 25 mm, Quick Change Disposable Plate (pkg. of 20) |
402622.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 50 mm, Quick Change Plate |
402623.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 40 mm, Quick Change Plate |
402624.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 25 mm, Quick Change Plate |
402625.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 8 mm, Quick Change Plate |
402627.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 8 mm,Quick Change Plate |
402628.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 25 mm, Quick Change Plate |
402629.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 40 mm, Quick Change Plate |
402630.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 25 mm, QuickChange Plate |
402631.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 40 mm,Quick Change Plate |
402632.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 50 mm,Quick Change Plate |
402633.901 | HR x0, DHR, ARES-G2, APS, Titanium, 25 mm, Quick Change Plate |
402634.901 | HR x0, DHR, ARES-G2, APS, Titanium, 50 mm, Quick Change Plate |
402681.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 42 mm Dia., 15 mm Edge Height, Immersion CupNote: Includes two removable sidewalls (one aluminum and one clear polycarbonate) for easy sample loading and trimming. |
402751.901 | HR x0, DHR, ARES-G2, APS, Quick Change Disposable Plate Holder |
402751.902 | HR x0, DHR, ARES-G2, APS, Quick Change Plate Holder |
402769.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 40 mm,Quick Change Plate |
402770.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 25 mm,Quick Change Plate |
402811.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 8 mm,Quick Change Plate |
402815.901 | Vane Rotor for HR x0, DHR Pressure Cell (P/N: 533216.901) |
402817.901 | Vane rotor for HR x0, DHR & ARES-G2 High Sensitivity Pressure Cell (HSPC)Note: Requires HR x0, DHR or ARES-G2 High Sensitivity Pressure Cell – HR x0, DHR (P/N: 547050.901) or ARES-G2 (P/N: 402818.901). |
402828.901 | Starch Rotor for HR x0, DHR Pressure Cell (P/N: 533216.901) |
403056.901 | HR x0, DHR, ARES-G2 Replacement Clamps for EVA (pkg. of 4) |
403064.901 | 20 mm diameter Disposable Acrylic Plates (pkg. of 10)Note: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of HR x0/HR/AR-UV option. |
403153.001 | 20 mm Quartz Plate for HR x0/DHR/AR and ARES UV-Curing OptionNote: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of HR x0/DHR/AR-UV option. |
403209.901 | Air Cooled Peltier Circulator (110/220VAC; 50/60Hz)Note: For use with HR x0, DHR, AR and ARES Rheometers. |
404140.901 | HR x0, DHR Standard Drum Pair Set for EVA |
404140.903 | HR x0, DHR Knurled Surface Drum Pair Set for EVA |
404140.905 | HR x0, DHR Roughened Surface Drum Pair Set for EVA |
404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) with fittings for rheometers For use with:1) HR x0, DHR, AR, and ARES-G2 Peltier Plate and Peltier Concentric Cylinder Systems.2) HR x0 and DHR UPP System.3) HR x0 Combined UHP and Peltier Manifold (P/N: 534059.901).4) DHR & AR UHP Systems along with the Combined Manifold (P/N: 554104.901).NOT FOR USE WITH LASER FLASH, XENON FLASH, OR HEAT FLOW METER INSTRUMENTS. |
404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) with fittings for rheometers For use with:1) HR x0, DHR, AR, and ARES-G2 Peltier Plate and Peltier Concentric Cylinder Systems.2) HR x0 and DHR UPP System.3) HR x0 Combined UHP and Peltier Manifold (P/N: 534059.901).4) DHR & AR UHP systems along with the Combined Manifold (P/N: 554104.901).NOT FOR USE WITH LASER FLASH, XENON FLASH, OR HEAT FLOW METER INSTRUMENTS. |
405000.901 | ACS-3 Air Chiller System (240VAC/60 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. |
405000.902 | ACS-3 Air Chiller System (220-230VAC/50 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. |
405001.901 | ACS-2 Air Chiller System (240VAC/60 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. |
405001.902 | ACS-2 Air Chiller System (220-230VAC/50 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. |
405400.901 | HR x0, DHR ETC & DMA 850/ Q800 Combined Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. |
406502.901 | HRx0 Auto-Trim Disposable Trimmers (pkg. of 20) |
406510.901 | HRx0 Auto-Trim Disposable Trimmers (pkg. of 100) |
500030.901 | Membrane Compressed Air Dryer |
500030.901 | Membrane Compressed Air Dryer |
511080.946 | HR x0, Stainless Steel, 8 mm Plate, NSTNote: For use with HR x0 only. |
511120.946 | HR x0, Stainless Steel, 12 mm Plate, NSTNote: For use with HR x0 only. |
511200.945 | HR x0, Stainless Steel, 20 mm PlateNote: For use with HR x0 only. |
511200.946 | HR x0, Stainless Steel, 20 mm Plate, NSTNote: For use with HR x0 only. |
511203.945 | HR x0, Stainless Steel, 20 mm, 0.5 deg ConeNote: For use with HR x0 only. |
511204.945 | HR x0, Stainless Steel, 20 mm, 1 deg ConeNote: For use with HR x0 only. |
511204.946 | HR x0, Stainless Steel, 20 mm, 1 deg Cone, NSTNote: For use with HR x0 only. |
511206.945 | HR x0, Stainless Steel, 20 mm, 2 deg ConeNote: For use with HR x0 only. |
511206.946 | HR x0, Stainless Steel, 20 mm, 2 deg Cone, NSTNote: For use with HR x0 only. |
511207.945 | HR x0, Stainless Steel, 20 mm, 4 deg ConeNote: For use with HR x0 only. |
511207.946 | HR x0, Stainless Steel, 20 mm, 4 deg Cone, NSTNote: For use with HR x0 only. |
511250.946 | HR x0, Stainless Steel, 25 mm Plate, NSTNote: For use with HR x0 only. |
511400.945 | HR x0, Stainless Steel, 40 mm PlateNote: For use with HR x0 only. |
511403.945 | HR x0, Stainless Steel, 40 mm, 0.5 deg ConeNote: For use with HR x0 only. |
511404.945 | HR x0, Stainless Steel, 40 mm, 1 deg ConeNote: For use with HR x0 only. |
511406.945 | HR x0, Stainless Steel, 40 mm, 2 deg ConeNote: For use with HR x0 only. |
511407.945 | HR x0, Stainless Steel, 40 mm, 4 deg ConeNote: For use with HR x0 only. |
511500.945 | HR x0, Stainless Steel, 50 mm PlateNote: For use with HR x0 only. |
511504.945 | HR x0, Stainless Steel, 50 mm, 1 deg ConeNote: For use with HR x0 only. |
511506.945 | HR x0, Stainless Steel, 50 mm, 2 deg ConeNote: For use with HR x0 only. |
511600.945 | HR x0, Stainless Steel, 60 mm PlateNote: For use with HR x0 only. |
511603.945 | HR x0, Stainless Steel, 60 mm, 0.5 deg ConeNote: For use with HR x0 only. |
511604.945 | HR x0, Stainless Steel, 60 mm, 1 deg ConeNote: For use with HR x0 only. |
511606.945 | HR x0, Stainless Steel, 60 mm, 2 deg ConeNote: For use with HR x0 only. |
511607.945 | HR x0, Stainless Steel, 60 mm, 4 deg ConeNote: For use with HR x0 only. |
512080.946 | HR x0, Stainless Steel, Composite HB, 8 mm, NSTNote: For use with HR x0 only. |
512200.945 | HR x0, Stainless Steel, Composite HB, 20 mmNote: For use with HR x0 only. |
512200.946 | HR x0, Stainless Steel, Composite HB, 20 mm, NSTNote: For use with HR x0 only. |
512206.945 | HR x0, Stainless Steel, Composite HB, 20 mm, 2 deg ConeNote: For use with HR x0 only. |
512206.946 | HR x0, Stainless Steel, Composite HB, 20 mm, 2 deg Cone, NSTNote: For use with HR x0 only. |
512250.946 | HR x0, Stainless Steel, Composite HB, 25 mm, NSTNote: For use with HR x0 only. |
512400.945 | HR x0, Stainless Steel, Composite HB, 40 mmNote: For use with HR x0 only. |
512406.945 | HR x0, Stainless Steel, Composite HB, 40 mm, 2 deg ConeNote: For use with HR x0 only. |
512407.945 | HR x0, Stainless Steel, Composite HB, 40 mm, 4 deg ConeNote: For use with HR x0 only. |
512600.945 | HR x0, Stainless Steel, Composite HB, 60 mmNote: For use with HR x0 only. |
512606.945 | HR x0, Stainless Steel, Composite HB, 60 mm, 2 deg ConeNote: For use with HR x0 only. |
512607.945 | HR x0, Stainless Steel, Composite HB, 60 mm, 4 deg ConeNote: For use with HR x0 only. |
513200.945 | HR x0, HA Aluminum, 20 mm PlateNote: For use with HR x0 only. |
513204.945 | HR x0, HA Aluminum, 20 mm, 1 deg ConeNote: For use with HR x0 only. |
513206.945 | HR x0, HA Aluminum, 20 mm, 2 deg ConeNote: For use with HR x0 only. |
513207.945 | HR x0, HA Aluminum, 20 mm, 4 deg ConeNote: For use with HR x0 only. |
513400.945 | HR x0, HA Aluminum, 40 mm PlateNote: For use with HR x0 only. |
513404.945 | HR x0, HA Aluminum, 40 mm, 1 deg ConeNote: For use with HR x0 only. |
513406.945 | HR x0, HA Aluminum, 40 mm, 2 deg ConeNote: For use with HR x0 only. |
513407.945 | HR x0, HA Aluminum, 40 mm, 4 deg ConeNote: For use with HR x0 only. |
513600.945 | HR x0, HA Aluminum, 60 mm PlateNote: For use with HR x0 only. |
513603.945 | HR x0, HA Aluminum, 60 mm, 0.5 deg ConeNote: For use with HR x0 only. |
513604.945 | HR x0, HA Aluminum, 60 mm, 1 deg ConeNote: For use with HR x0 only. |
513606.945 | HR x0, HA Aluminum, 60 mm, 2 deg ConeNote: For use with HR x0 only. |
513607.945 | HR x0, HA Aluminum, 60 mm, 4 deg ConeNote: For use with HR x0 only. |
517040.901 | Stainless Steel Cover Plate, Cross Hatched, 40 mm |
517060.901 | Stainless Steel Cover Plate, Cross Hatched, 60 mm |
517080.946 | HR x0, Stainless Steel, Cross Hatched, 8 mm Plate, NSTNote: For use with HR x0 only. |
517105.901 | Insulated Solvent Trap Cover and Location RingNote: For standard Peltier Plate – NOT for use with Stepped Peltier. |
517200.945 | HR x0, Stainless Steel, Cross Hatched, 20 mm PlateNote: For use with HR x0 only. |
517200.946 | HR x0, Stainless Steel, Cross Hatched, 20 mm Plate, NSTNote: For use with HR x0 only. |
517400.945 | HR x0, Stainless Steel, Cross Hatched, 40 mm PlateNote: For use with HR x0 only. |
517600.945 | HR x0, Stainless Steel, Cross Hatched, 60 mm PlateNote: For use with HR x0 only. |
519080.946 | HR x0, Stainless Steel, Sandblasted, 8 mm Plate, NSTNote: For use with HR x0 only. |
519200.945 | HR x0, Stainless Steel, Sandblasted, 20 mm PlateNote: For use with HR x0 only. |
519200.946 | HR x0, Stainless Steel, Sandblasted, 20 mm Plate, NSTNote: For use with HR x0 only. |
519250.946 | HR x0, Stainless Steel, Sandblasted, 25 mm Plate, NSTNote: For use with HR x0 only. |
519400.945 | HR x0, Stainless Steel, Sandblasted, 40 mm PlateNote: For use with HR x0 only. |
519600.945 | HR x0, Stainless Steel, Sandblasted, 60 mm PlateNote: For use with HR x0 only. |
520400.945 | HR x0, Titanium, 40 mm PlateNote: For use with HR x0 only. |
520600.945 | HR x0, Titanium, 60 mm PlateNote: For use with HR x0 only. |
520604.945 | HR x0, Titanium, 60 mm, 1 deg ConeNote: For use with HR x0 only. |
520606.945 | HR x0, Titanium, 60 mm, 2 deg ConeNote: For use with HR x0 only. |
523080.937 | Aluminum, 8 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
523200.917 | Aluminum, 20 mm Disposable Plates (pkg. of 10)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
523250.927 | Aluminum, 25 mm Disposable Plates (pkg. of 100)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
523250.928 | Aluminum, 25 mm Disposable Plates (with Drip Channel) (pkg. of 100)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
523250.937 | Aluminum, 25 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
523250.938 | Aluminum, 25 mm Disposable Plates (with Drip Channel) (pkg. of 20)Note 1: Required for EHP and UHP upper and lower systems.Note 2: For use with upper ETC shaft – (HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
523400.907 | Aluminum, 40 mm Disposable Plate |
523400.927 | Aluminum, 40 mm Disposable Plates (pkg. of 100)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
523400.937 | Aluminum, 40 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
526080.904 | HA Aluminum, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries. |
526250.904 | HA Aluminum, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries. |
526400.903 | HA Aluminum, 40 mm ETC PlateNote: For use for upper and lower (use with single piece upper shaft/geometries). |
527040.904 | Stainless Steel, 4 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use two of this partnumber if using an upper screwed shaft. |
527080.904 | Stainless Steel, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use two of this partnumber if using an upper screwed shaft. |
527080.906 | Stainless Steel, Cross Hatched, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper geometry (P/N: 543640.901) for DHR or (P/N: 543640.941) for HR x0. |
527080.937 | Stainless Steel, 8 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
527250.904 | Stainless Steel, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or an upper screw-inplate (P/N: 527250.903) and upper screwed shaft. |
527250.906 | Stainless Steel, Cross Hatched, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper geometry (P/N: 543641.901) for DHR or (P/N: 543641.941) for HR x0. |
527250.937 | Stainless Steel, 25 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
527250.938 | Stainless Steel, 25 mm Disposable Plates (with Drip Channel) (pkg. of 20)Note 1: Required for EHP and UHP upper and lower systems.Note 2: For use with upper ETC shaft – (HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
527400.903 | Stainless Steel, 40 mm ETC Plate, use for upper and lowerNote: Use one with single piece upper shaft (P/N: 543331.001), or two requiredif used with upper screwed shaft. |
527400.905 | Stainless Steel, Cross Hatched 40 mm PlateNote: Use with upper and lower. Use with single piece upper geometry (P/N: 543642.901) for DHR or (P/N: 543642.941) for HR x0. |
527400.937 | Stainless Steel, 40 mm Disposable Plates (pkg. of 20)Note: For use with upper ETC shaft(HR x0 P/N: 543682.941; DHR & AR-G2 P/N: 543682.901). |
529612.901 | Purge Gas Cover and Location RingNote: For Standard Peltier Plate. |
529613.901 | Hard Anodized Split Solvent Trap Cover and Location RingNote: For Standard Peltier Plate. |
529750.901 | 25 mm Plate Insulating Thermal CoverNote: For Peltier Plate. |
530021.001 | HR x0, DHR & AR-G2, PT-IR Du Nouy Ring Geometry for Dynamic Interfacial SystemNote: Replacement ring – does NOT include geometry holder. |
531035.901 | Insulated Solvent Trap for Advanced Peltier PlateNote: Includes Solvent Trap Cover and Location Ring. |
531038.901 | Advanced Peltier Plate Purge Gas Cover |
531056.901 | HR x0, DHR & AR-Series Blank Smart Swap Base |
531070.901 | Hard Anodized Aluminum Solvent TrapNote: For Advanced Peltier Plate. |
532066.901 | AR-XXXX to HR x0, DHR & AR-G2 Geometry Adapter KitNote: For use only with standard Peltier Plate geometries. |
532067.901 | HR x0, DHR & AR-Rheometer Vibration Isolation Pads |
532080.901 | HR x0, DHR, ARES-G2, APS, Tribo-Rheometry Lower Geometry Holder |
533201.901 | HR x0, DHR Smart Swap Concentric Cylinder Peltier JacketNote: Does NOT include cup or rotor. Includes cover. |
533208.901 | HR x0, DHR ETC Oven Camera Viewer Option |
533209.901 | HR x0, DHR Smart Swap Advanced Peltier Plate |
533210.901 | HR x0, DHR Smart Swap™ Peltier PlateNote: Temperature Range = 200 °C. |
533211.901 | HR x0, DHR Stepped Peltier with Screw-in PlateNote: Temperature Range = 200 °C. |
533212.901 | HR x0, DHR Smart Swap Disposable Stepped Peltier PlateNote: Temperature Range = 200 °C.DHR requires Disposable Plate Shaft (P/N: 546320.901).HR x0 requires Disposable Plate Shaft (P/N: 546320.941). |
533216.901 | HR x0, DHR Pressure Cell High Temp Note: Requires Smart Swap Peltier Concentric Cylinder Jacket (P/N: 533201.901) or Smart Swap Electrically Heated Concentric Cylinder (P/N: 547310.901). |
533217.901 | HR x0, DHR-3 & DHR-2, 365 nm LED UV-Curing Accessory |
533218.901 | HR x0, DHR-3 & DHR-2, 455 nm LED Blue Light Curing Accessory |
533222.901 | HR 30, HR 20, DHR-3, DHR-2 SALS Accessory |
533231.901 | AR to HR x0, DHR Quick-Connect Plumbing AdapterNote: Required for using existing accessories on a HR x0, DHR instrument (includes 2 large male fittings). |
533242.901 | Tribo-Rheometry Accessory Base Kit |
533246.901 | HR x0, DHR & AR-G2, Stainless Steel Building Materials Cell Cup with Slotted Cage |
533247.901 | HR x0, DHR & AR-G2, Stainless Steel Building Materials Cell Paddle |
533249.901 | Tribo-Rheometry, 5/16” Truncated SST Balls (pkg. of 12) |