河南东吉高科有限公司
Micromeritics
| ASAP 2425 |
| Vacuum Pump |
| Part No.062-00001-11 |
| 115-V |
| Part No.062-00001-23 |
| 230-V |
| Part No.062-00100-00 |
| Vacuum foreline pump, oil-free, for systems with high-vacuum option, 115/230 VAC |
| Part No.004-25630-00 |
| Centering ring |
| Part No.004-62109-01 |
| Service Kit, for Pfeiffer dry forepump |
| Part No.004-62023-01 |
| Service Kit, for Vacuubrand dry forepump |
| Reference Material |
| Part No.004-16821-00 |
| Silica-alumina pellets, surface area ~198 m²/g, 10g |
| Part No.004-16816-00 |
| Alumina, ~0.49 m²/g (krypton), 10 g |
| Part No.004-16843-00 |
| Micropore, 13X, 10g |
| Part No.004-16844-00 |
| Micropore, Y-zeolits, 2.5g |
| Oil |
| Part No.004-16003-01 |
| Vacuum pump oil, 1 liter |
| Pump Filter |
| Part No.004-27040-00 |
| For vacuum pump exhaust |
| Activated Alumina Pellets |
| Part No.004-16830-00 |
| 500 grams, for oil vapor trap |
| Dewar |
| Part No.201-25830-00 |
| Dewar, 2.5 liter |
| Dewar Depth Gauge |
| Part No.240-25901-00 |
| Dewar depth gauge |
| Dewar Cover |
| Used during analysis |
| Part No.202-31707-00 |
| Cover for 2.5 liter Dewar |
| Part No.200-25929-00 |
| Cover for 1.0 liter Dewar |
| Dewar Insulator |
| Part No.240-25895-00 |
| Dewar insulator (used when Dewar is in lowered position) |
| VacPrep 061 |
| Part No.061-00030-00 |
| VacPrep 061, degasses up to 6 samples at up to 400 degrees Celsius with either flowing gas or by evacuation (evacuation requires a vacuum pump). |
| Liquid Nitrogen Transfer System |
| Part No.021-00000-00 |
| For easy filling of Dewars. Includes 47 liter Dewar, dolly, and pump with 100-cm discharge line. Universal voltage input. |
| Plumbing Ferrule Front |
| Part No.004-25103-00 |
| Front, Teflon, for 1/4 in. (0.64) OD Tubing |
| Part No.004-25131-00 |
| Front, Teflon; for 1/8-in. maintenance kit |
| Plumbing Ferrule Rear |
| Part No.004-25104-00 |
| Rear, Nylon, for 1/4 in. (0.64-cm) OD tubing |
| Part No.004-25132-00 |
| Rear, Nylon; for 1/8-in. maintenance kit |
| Plumbing Ferrule Set |
| Part No.004-25913-00 |
| Ferrule set, 1/8-in. (0.32-cm)PEEK OD tubing used on gas lines. |
| Gas Regulator |
| Part No.004-62230-58 |
| CGA 580 fitting (He, Kr, Nitrogen) 30 psig |
| Part No.004-62230-32 |
| CGA 320 fitting (CO2), 30 psig |
| Part No.004-33601-00 |
| Regulator Expansion Kit, adds additional outlet to gas regulator, includes fittings and instructions. |
| Part No.004-33602-00 |
| Pressure Relief Kit: prevents excessive gas pressure in event of regulator failure. Not to be used with noxious gases. |
| Heating Mantels |
| Part No.003-26044-00 |
| ASAP 2420 – Heating Mantel with type K thermocouple, 450 °C maximum 24 VDC. |
| Part No.003-26045-00 |
| ASAP 2420 – Heating mantle with type K thermocouple, 450 °C maximum, 24 VDC, for micropore option; side-laced for monolithic and other nonstandard sample tubes. |
| Part No.230-25808-00 |
| Heating mantle clip |
| Operator’s Manual |
| Part No.242-42801-01 |
| ASAP 2420 Operator’s manual |
| Part No.242-20800-00 |
| Software package, includes current version of ASAP 2420 software and operator’s manual |
| Sample Tube Brush |
| Part No.004-54609-00 |
| Sample tube brush |
| Sample Tube Funnel |
| Part No.240-25853-00 |
| Sample tube funnel |
| Sample Tube Rack |
| Part No.240-14855-00 |
| Sample tube rack |
| Sample Tube Support |
| Part No.240-32805-00 |
| Sample tube support, assists sample weighing |
| Saturation Pressure Tube |
| Part No.200-25840-00 |
| Saturation pressure (P0)tube, includes isothermal jacket |
| O-Ring for Potube |
| Part No.004-25006-00 |
| O-Ring size 006, Buna-N |
| Valve Plunger |
| Part No.250-25627-00 |
| Valve plunger, Buna-N seal, for analysis manifold and fast evacuation valve on degas manifold |
| Spring |
| Part No.201-22600-00 |
| Valve spring, for Buna-N plunger, for analysis manifold and fast evacuation valve on degas manifold |
| Part No.004-25936-00 |
| For Kalrez seal plunger |
| Valves |
| Part No.003-22617-00 |
| Solenoid valve, with 0.025 orifice for analysis gas inlets and degas inlet (yellow top) |
| Part No.003-22626-00 |
| Solenoid valve with 0.060 orifice, for degas ports and vacuum valve on inlet manifold (green top) |
| Oil Vapor Trap |
| Part No.062-33002-00 |
| Activated alumina oil vapor trap, for one vacuum pump |
| Part No.004-25652-00 |
| O-Ring, size 217, for oil vapor trap |
| Part No.200-33015-00 |
| Oil Vapor Trap Kit; includes two oil vapor traps and alumina (for vacuum pumps) |
| Software |
| Part No.242-20800-00 |
| Software package, ASAP 2420; includes current version of software and operator’s manual |
| Copper Tubing |
| Part No.290-25846-00 |
| ASAP 2420 – Copper tube for gas inlet, 1/8 in. diameter (0.32-cm) 6 ft. |
| Part No.230-02001-00 |
| ASAP 2405 – Copper, 1/8-in. (6 ft.) |
| Part No.201-25818-01 |
| Gas Inlet Line, Stainless Steel, 5m (16 ft.) |
| Part No.290-25846-01 |
| Gas Inlet line, Copper, 5m (16 ft.) |
| Reducer |
| Part No.004-25549-00 |
| Reducer, 1/8 in. tube x 1/4 in. tube, accepts 1/8 in. tube, connects to 1/4 in. swage fittings |
| Sample Tubes |
| Part No.240-61001-00 |
| Sample tube, 1/4 in.(0.64-cm)OD stem, 10-cm3bulb |
| Part No.240-61002-00 |
| Sample tube, 3/8 in.(0.96-cm)OD stem; 10-cm3bulb |
| Part No.240-61003-00 |
| Sample Tube, 1/2 in. |
| Isothermal Jackets |
| Part No.202-25901-00 |
| Isothermal jacket, 1/4 in. (0.64-cm) |
| Part No.202-25902-00 |
| Isothermal jacket, 3/8 in. (0.96-cm) |
| Part No.202-25903-00 |
| Isothermal jacket 1/2 in. (1.27-cm) |
| Volume Displacement Inserts |
| Part No.240-61014-00 |
| for 1/4-in. (0.64-cm) OD sample tube stem |
| Part No.240-61015-00 |
| for 3/8-in. (0.696cm) OD sample tube stem |
| Seal Frit |
| Part No.260-25890-00 |
| Seal frit with built-in check valve for air-sensitive samples (for 1/2 in.(1.27-cm)only |
| Part No.260-25891-00 |
| Opener, seal frit for 1/2 in. (1.27 cm) Sample tube |
| O-Rings for Sample Tubes |
| Part No.004-25466-00 |
| O-ring, size 010, for 1/4 in. (0.64-cm) sample tubes |
| Part No.004-25022-00 |
| O-ring, size 012, for 3/8 in. (0.96-cm) sample tube |
| Sample Tube Ferrules |
| Part No.240-25803-00 |
| Ferrule, 1/4 in. (0.64-cm)OD sample tube stem |
| Part No.240-25802-00 |
| Ferrule, 3/8 in. (0.96-cm)OD sample tube stem |
| Part No.260-25843-00 |
| Ferrule, 1/2 in. (1.27-cm)OD sample tube stem |
| Sample Tube Nut |
| Part No.300-25824-00 |
| Nut, sample tube |
| Sample Tube Stopper |
| Part No.004-32004-00 |
| Stopper, for 1/4-in. and 3/8-in.(0.96-cm) sample tubes |
| Part No.240-32000-00 |
| Stopper, for 1/2 in. (1.27-cm) sample tubes |
| Port Frit |
| Part No.004-27041-00 |
| for port fittings, 20-micron, 1/4-in. diameter x 1/16-in. |
| Fuse |
| Part No.003-51130-00 |
| Slow-Blow, 3 AG, 1A |
| Part No.003-51123-00 |
| Rubber Shelf Mat |
| Part No.240-25834-00 |
| For degas shelf |
| Dry System Vacuum Pump |
| Vacuubrand |
| Part No.062-00200-00 |
| Vacuubrand pump, Includes vacuum pump, vacuum hose, fittings, and manual. |
| Part No.004-62023-01 |
| Service kit forVacuubrand pump |
| Part No.202-33692-00 |
| Service Kit forPfeiffer Vacuum Pump*dry vacuum pump (not shown); includes replacement diaphragm and seals and instructions.*this pump is no longer supplied with the instrument. |
| Kit |
| Part No.242-33601-00 |
| Operating Supplies Kit; includes solenoid valves, O-rings, ferrules, frit, brush, valve spring, funnel, sample tube, filler rod, stopper, gasket, plunger, and valve assembly |
| Part No.242-33002-00 |
| Micropore Kit; includes software, heating mantles, reference material, and instructions. |
| Wrench |
| Part No.004-25157-00 |
| For servicing degas and Povalves on the 2405 |
| Gas Adsorption Apparatus Poster |
| Part No.200-42902-00 |
| 24″ x 36″ |
| Gas Adsorption Theory Poster |
| Part No.200-42901-00 |
| 24″ x 36″ |
| FlowPrep 60 |
| Part No.060-00030-00 |
| Degasses up to 6 samples at up to 400 °C with flowing gas. |
| Analytical Methods in Fine Particle Technology |
| Part No.008-42001-00 |
| Analytical Methods in Fine Particle Technology |
| by: Paul A. Webb and Dr. Clyde Orr |
| Sample port O-ring removal tool |
| Part No.004-54618-00 |
| Valve gasket, Kel-F, for analysis manifold |
| Part No.250-25608-00 |
| Funnel |
| Funnel |
| Part No.200-25879-00 |
| For filling vacuum pump with oil |