河南东吉高科有限公司
安捷伦
| G1600-60211 | CE standard capillary 50um id, 40cm LEF |
| G1600-60232 | CE ext. light path cap. 50um, 40cm 2/PK |
| G1600-60233 | CE ext.light path cap.50um,35cm 2/PK |
| G1600-60311 | CE standard capillary, 75um, 40cm 2/PK |
| G1600-60332 | CE ext. light path cap. 75um, 40cm 2/PK |
| G1600-60411 | CE standard capillary, 100um, 40cm 2/PK |
| G1600-60419 | PVA CE Capillary, 100um, 40cm |
| G1600-61132 | HPCE extended light path cap, 25um, 56cm |
| G1600-61211 | HPCE stndrd cap 50um id 56cm lgth 2/PK |
| G1600-61219 | PVA CE Capillary, 50um, 56cm |
| G1600-61232 | Ext. Light Path CE cap. 50um, 56cm, 2/pk |
| G1600-61239 | PVA CE-cap., Ext. Light Path, 50um, 56cm |
| G1600-61240 | PVA CE-cap. Ext. Light Path 50um, 24.5cm |
| G1600-61311 | HPCE stndrd cap 75um id, 56cm lght 2/PK |
| G1600-61332 | Ext. Light path cap. 75um, 56cm, 2/pk |
| G1600-61419 | PVA CE Capillary, 100um, 56cm |
| G1600-62132 | HPCE extended light path cap, 25um, 72cm |
| G1600-62211 | HPCE stndrd cap 50um id, 72cm lght 2/PK |
| G1600-62232 | Ext. Light path cap. 50um, 72cm, 2/pk |
| G1600-62311 | HPCE stndrd cap 75um id, 72cm lght 2/PK |
| G1600-62332 | Ext. Light path cap., 75um, 72cm, 2/pk |
| G1600-62411 | CE standard capillary, 100um, 72cm 2/PK |
| G1600-63211 | CE standard capillary, 50um, 24.5cm 2/PK |
| G1600-63311 | CE standard capillary, 75um, 24.5cm 2/PK |
| G1600-64211 | CE standard capillary, 50um, 104cm 2/PK |
| G1600-64232 | CE ext. light path cap. 50um, 104cm 2/PK |
| G1600-64311 | CE standard capillary, 75um, 104cm 2/PK |
| G1600-64332 | CE ext. light path cap. 75um, 104cm 2/PK |
| G1600-67219 | PVA CE cap for MS, 50um, 125 cm tot.1. |
| G1600-67311 | CE-MS capillary, L/125cm, 50um 2/PK |
| G1600-67319 | PVA CE cap for MS, 75um, 125cm tot.1. |
| G1600-68319 | PVA CE cap for HSDC, 75um, 56cm eff.1. |
| G1600-68714 | Capillary kit, high sens.cell,88cm,75um |
| G1600-68715 | Capillary kit-high Sens.cell,72cm,75um |
| G1600-68716 | Capillary kit, high sens.cell,56cm,75um |
| G160U-61219 | PVA CE-Capillary, 50um, 60cm, universal |
| G160U-61239 | PVA CE capillary, ext. light path 60cm |
| G160U-61419 | PVA CE Capillary, 100um, 60cm, universal |
| G1820-65016 | Drain Tank (with PVC connector,1 liter) |
| G1820-65050 | Ni skimmer cone for 7500 a/i/s, 1/pk |
| G1820-65138 | Concentric nebulizer (Quartz), 1/pk. |
| G1820-65199 | O-rings, Viton for Babington neb., 4/pk |
| G1820-65216 | Peri pump tube Ismaprene 3-stop yel/blu |
| G1820-65217 | Peri pump tube Silicone 3-stop wht/wht |
| G1820-65237 | Pt skimmer cone for 7500s, 1/pk |
| G1820-65238 | Ni sampling cone for 7500 a/i/c/ce/cx |
| G1820-65239 | Pt sampling cone 10mm insert, 7500 s/cs |
| G1820-65360 | Pt sampling cone 18mm insert, for 7500 |
| G1820-65491 | O-ring kit for Concentric Neb. (10 ea) |
| G1820-65520 | O-rings for Conc. Neb., org. solvent 4/p |
| G1833-65132 | Skimmer cone, Pt tip, Cu base for 7500cs |
| G1833-65419 | Long life Pt shield, ICP-MS ShieldTorch |
| G1833-65421 | ShieldTorch bonnet, quartz 7/8×00 ICP-MS |
| G1833-65430 | Clamps for spray chamber (2/pk) |
| G1833-65497 | Ni skimmer cone for 7500c, 1/pk |
| G1833-65571 | Peri pump tube Tygon 3-stop red/org 12/p |
| G1833-65590 | Skimmer base, brass for 7500 cs/ce/cx |
| G1833-65591 | Skimmer base, stainless for 7500ce/cx/cs |
| G1946-80054 | Capillary Cleaning |
| G1946-85004 | ESI/APCI Positive Ion Perf. Std. |
| G1960-80039 | Oil Mist Filter, MS40+ |
| G1969-85026 | HPLC Flushing Solvent – 500 mL |
| G1971-60025 | APPI Lamp |
| G2255-68700 | Vial plate for 54x2ml vials, 6/pk |
| G2453-85050 | Acetonitrile LC/MS grade 1 L |
| G2453-85060 | Formic Acid Reagent Grade |
| G2855-20555 | Swaging nut,Ultimate Union and QuickSwap |
| G2855-28501 | CFT Ferrule Flex Gold 0.25mm ID Col 10PK |
| G2855-28502 | CFT Ferrule Flex Gold 0.32mm ID Col 10PK |
| G2855-28503 | CFT Ferrule Flex Gold 0.53mm ID Col 10PK |
| G2855-28505 | CFT Ferrule, Flexi, Gold UM Small, 10/PK |
| G2855-28506 | CFT Ferrule, Flexi, Gold UM Large, 10/PK |
| G3138-65128 | Peri pump tube Ismaprene 2-stop org/purp |
| G3138-65143 | Y connector for pump tubing, ISIS, 5/pk |
| G3139-65002 | PFA endcap, for MicroFlow nebulizer |
| G3139-65003 | PFA spray chamber, MicroFlow Nebulizer |
| G3139-65004 | PFA connector,for MicroFlow nebulizer |
| G3139-65005 | Injector,Pt,2mm,PFA Base,use w/Micro Flo |
| G3139-65006 | Torch quartz, w/o injector for MicroFlow |
| G3139-65100 | MicroFlow nebulizer PFA 200uL/min., 1/pk |
| G3139-65102 | MicroFlow neb. PFA (200) w/I-AS probe |
| G3139-65106 | MicroFlow nebulizer PFA 20-50uL/min, 1/p |
| G3139-65108 | MicroFlow neb. PFA (20) w/I-AS probe |
| G3160-65303 | 6mL PP vial for I-AS Trays A + E (200pk) |
| G3160-65304 | 18mL PP vial for I-AS Trays B,D+E (55pk) |
| G3160-65305 | 50 mL PP vials for I-AS Tray C, 20/pk |
| G3160-65315 | 2mL PE vials for I-AS Tray D, 200/pk |
| G3160-65317 | 1.5 mL PFA vials for I-AS Tray D, 10/pk |
| G3160-65326 | Peri pump tubing set for I-AS, Tygon 1/p |
| G3160-65327 | Peri pump tubing set for I-AS, Tygon 5/p |
| G3161-80000 | Mira Mist nebulizer (PTFE), 1/pk. |
| G3161-80001 | Mira Mist nebulizer (PEEK), 1/pk. |
| G3188-27501 | Ferrule, flexi inert 0.25mm col 10/PK |
| G3188-27502 | Ferrule, flexi, inert 0.32mm col 10/PK |
| G3188-27503 | Ferrule, flexi, inert 0.53mm col 10/PK |
| G3188-27504 | Ferrule, flexi, inert, no hole, 10/PK |
| G3188-27505 | Ferrule, flexi, inert, UM small, 10/PK |
| G3188-27506 | Ferrule, flexi, inert, UM large, 10/PK |
| G3266-65003 | MicroMist nebulizer (Glass), 1/pk |
| G3266-80004 | MicroMist nebulizer (glass) U-series 1/p |
| G3266-80005 | MicroMist nebulizer w/ PEEK gas fitting |
| G3266-80010 | EzyFit sample inlet, 0.25mm id, 10/pk |
| G3266-80011 | EzyFit sample inlet, 0.5mm id, 10/pk |
| G3266-80012 | UniFit sample connector, 0.5mm id, 10/pk |
| G3266-80013 | UniFit sample connector, 0.25mm id, 10/p |
| G3266-80015 | EzyLok gas connector for concentric neb. |
| G3266-80017 | Neb. gas tubing with PEEK connector, 1/p |
| G3266-80020 | Nebulizer cleaner, for concentric neb. |
| G3270-60106 | Skimmer cone, Pt tip, Ni base for 7500cs |
| G3270-60643 | Skimmer cone, copper, for 7500cs |
| G3270-65024 | Skimmer cone, nickel, for 7500ce/cx |
| G3270-80025 | Quartz connector tube straight, ICP-MS |
| G3270-80043 | Torch quartz 2.5mm ID for 7500 ICP-MS |
| G3280-60008 | End cap for spray chamber, ICP-MS. 1/pk |
| G3280-60608 | Skimmer base, stainless, for x-lens |
| G3280-60621 | Skimmer base, brass, for x-lens, ICP-MS |
| G3280-60638 | RF Coil, ICP-MS, 1/pk |
| G3280-67008 | Peri pump tube, PVC, 2-stop OR/red, 12/p |
| G3280-67009 | Graphite gasket for Sampling cone (3/pk) |
| G3280-67036 | ICP-MS sampler cone, Platinum, 1/pk |
| G3280-67040 | ICP-MS sampler cone, Nickel, 1/pk |
| G3280-67041 | 77/78/8800 skimmer cone, Ni, x-lens,1/pk |
| G3280-67047 | Peri pump tube Tygon 2-stop blu/org 12/p |
| G3280-67056 | ICP-MS sampler cone, Platinum 18mm, 1/pk |
| G3280-67060 | 77/78/8800 skimmer cone, Pt, x-lens,1/pk |
| G3280-67061 | ICP-MS sampler cone, Nickel-plated, 1/pk |
| G3280-67063 | 77/78/8800 skimmer cone,Pt/Ni,x-lens,1/p |
| G3280-67064 | 77/79/8800 skimmer cone,Pt/Cu,s-lens,1/p |
| G3280-67065 | 77/79/8800 skimmer cone,Pt/Ni,s-lens,1/p |
| G3280-67066 | 77/79/8800 skimmer cone, Ni, s-lens,1/pk |
| G3280-67067 | 77/79/8800 skimmer cone, Cu, s-lens,1/pk |
| G3280-67115 | O-ring A (perfluoro, od:1.07, 5/pk) |
| G3280-67116 | O-ring B (perfluoro, od:3.8, 5/pk) |
| G3280-67142 | ICP-MS sampler cone, Pt/Ni-plated, 1/pk |
| G3280-67142-CRR | TradeIn Pt-tip Ni-plated Sampling Cone |
| G3280-67221 | Basic Supplies 77/78/79/88/8900, AVF 60 |
| G3280-80008 | Spray chamber double pass (Quartz) |
| G3280-80053 | Torch quartz 2.5mm id for ICP-MS |
| G3280-80080 | Torch, quartz 1.5mm inj taper for ICP-MS |
| G3280-80081 | Torch, quartz 1.0mm inj taper for ICP-MS |
| G3280-80602 | Total consumption neb. for capillary LC |
| G3280-80603 | Single pass s/chamber for capillary LC |
| G3280-GE063-CRR | Trade In value on retrn of GE Pt Skimmer |
| G3285-80000 | PFA Concentric Nebulizer (200ul/min.) |
| G3285-80001 | PFA concentric neb. (200uL/min, w/Probe) |
| G3285-80002 | PFA Concentric Nebulizer (50ul/min) |
| G3285-80003 | PFA Concentric Neb(50ul/min, w/Probe) |
| G3285-80020 | End Cap for Inert Kit,PFA |
| G3285-80021 | Spray Chamber for Inert Kit,PFA |
| G3285-80022 | PFA drain tube for inert kit 7500 ICP-MS |
| G3285-80023 | Connector tube for inert kit, no port |
| G3285-80024 | Long connector tube for ICP-MS inert kit |
| G3285-80034 | Sapphire injector, inert torch, 2.5mm id |
| G3285-80035 | Platinum injector, inert torch, 2.5mm id |
| G3285-80036 | Sapphire injector 1.5 mm id with O2 port |
| G3285-80037 | Platinum injector, inert torch, 1.5mm id |
| G3285-80050 | Torch,Quartz,for PFA inert kit |
| G3285-80085 | O-rings for injector, inert torch, 10/pk |
| G3286-80100 | Sample probe,0.8mm ID for ASX-500 Series |
| G3286-80101 | Sample probe,0.3mm ID for ASX-500 Series |
| G3286-80102 | Sample probe,0.5mm ID for ASX-500 Series |
| G3286-80103 | ASX-500 sample rack,21 tubes x 50mL vial |
| G3286-80106 | ASX-500 sample rack,60 tubes x 14mL vial |
| G3286-80110 | Sample probe, carbon fibre 0.8mm id ASX |
| G3286-80111 | Sample probe, carbon fibre 0.3mm id ASX |
| G3286-80112 | Sample probe, carbon fibre 0.5mm id ASX |
| G3286-80117 | Rinse/drain tubing hook up kit,ASX-500 |
| G3286-80118 | Drain tubing/connector kit, ASX-500, 1/p |
| G3286-80119 | Sample probe, carbon fiber 1.0mm id ASX |
| G3286-80224 | Rinse Station for ASX-500 Series, 1/pk |
| G3286-80227 | Thumbscrew and O-ring Kit ASX500 Autosam |
| G3388-80001 | Replacement Sample Probe Filter |
| G3388-80002 | Replacement Reference Port Filter |
| G3440-20004 | Hastelloy Sample Loop, 100uL |
| G3440-20005 | Hastelloy Sample Loop, 0.50mL |
| G3440-20033 | Tube 1/16 inch 0.010 inch x 1000mm |
| G3440-20035 | Tube 0.0625inODx0.031inIDx1000mmLg, 316L |
| G3440-20037 | Ni Tube 1/16in x 0.031in ID 1000mm Long |
| G3440-60003 | New-ReNEWable Gas Purifier Crtg |
| G3440-60004 | ReNEWable Gas Purifier – New StartUp Kit |
| G3440-60033 | Inert Tube 1/16 inch 0.010 inch x 1000mm |
| G3440-60035 | Inert Tube 1/16 inch 0.031 inch x 1000mm |
| G3440-60136 | Tube,1/16 inch w/ 1/8 inch bulkhead ftg |
| G3440-60236 | Inert Tube 1/16 inch 0.038 inch x 975mm |
| G3440-60300 | SST 0.031inID 1000mm PPIP Carrier Line |
| G3440-60310 | Inert SST 0.031in ID 1000mm PPIP Carrier |
| G3440-60336 | Tube 1/16 inch 0.038inch x 975 mm |
| G3440-60600 | SST Modified Detector Line |
| G3440-60610 | Tube, UI 1/16 in, 0.010 in x 1000 mm |
| G3440-69003 | EXCH-ReNEWable Gas Recycled Crtg |
| G3440-80007 | ReNEWable Gas Purifier – Base Only |
| G3440-80217 | Column install pre-swaging tool,graphite |
| G3440-80218 | Column install pre-swaging tool, metal |
| G3440-80227 | Column Preswaging Tool,Cap Flow Devices |
| G3440-80247 | CFT Metal Column pre-swaging tool for GC |
| G3440-81011 | Column Nut Assy, Finger Tight |
| G3440-81012 | Compression Nut Assembly |
| G3440-81013 | Collared Column Nut, Self-Tightening MSD |
| G3440-81018 | WNG CLR column nut, inlet/detector AGI |
| G3440-81019 | WNG CLR column nut, MS, AGI |