河南东吉高科有限公司
备件
| P/N: | Product Description |
| 200400.001 | Replacement 5 mm diameter light guideNote: For HR x0/DHR/AR and ARES UV-Curing and Photo-Curing Options. |
| 200974.002 | SER3 and SER2 Standard Drum Pair for HR x0, DHR & AR |
| 200975.002 | SER3 and SER2 Knurled Surface Drum Pair Set for HR x0, DHR & AR |
| 200976.002 | SER3 and SER2 Rough Surface Drum Pair Set for HR x0, DHR & AR |
| 200977.002 | Securing Clamps for HR x0, DHR & AR SER3/2 and ARES-G2 SER3(pkg. of 6) |
| 200978.001 | SER3 and SER2 Dual Blade Cutter Assembly |
| 200979.001 | Razor Blades for SER3 and SER2 Dual Blade Cutter Assembly (pkg. of 50) |
| 201261.001 | DSR Standard N2700000SP Standard Oil |
| 202610.003 | Low Temperature Circulator Polyscience LS5 model 120V 60Hz for use with Upper Peltier PlateNote: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). |
| 202610.003 | Low Temperature Circulator Polyscience LS5 model 120V 60 Hz |
| 202611.003 | Low Temperature Circulator Polyscience LS5 model 240V 50Hz for use with Upper Peltier Plate Note: Requires UPP Low Temperature Accessory Kit (P/N: 534054.901). |
| 202611.003 | Low Temperature Circulator Polyscience LS5 model 240V 50Hz |
| 203135.001 | HR x0, DHR MMA Objective 20X Short Working Distance |
| 203170.001 | HR x0, DHR MMA Objective 50X Short Working Distance, Oil |
| 203171.001 | HR x0, DHR MMA Objective 100X Short Working Distance, Oil |
| 203183.001 | HR x0, DHR MMA Objective 40X Long Working Distance |
| 203273.001 | HR x0, DHR MMA Objective 20X Long Working Distance |
| 203274.001 | HR x0, DHR MMA Fluorescence Splitter |
| 203305.001 | HC-30 UPP Low Temperature Circulation Fluid (pkg. of 1) |
| 203330.001 | Keysight E4980AL-102 LCR MeterNote: For HR x0, DHR and ARES-G2, RSA-G2 DETA: frequency range: 20Hz to 1MHz; AC test signal (potential) 0.001 to 2 Volts (115/230VAC; 50/60Hz). |
| 203347.001 | Julabo Fluid Circulator, Wide Range (115VAC/60 Hz) |
| 203348.001 | Julabo Fluid Circulator, Wide Range (230VAC/50 Hz) |
| 203349.001 | Thermal C5 Low Temperature Circulator Fluid (-35 °C to 110 °C) |
| 203350.001 | Thermal C20S High Temperature Circulator Fluid (0 °C to 200 °C) |
| 203854.901 | Koolance Peltier Circulator Fluid (-10 °C to 100 °C, pkg. of 1) |
| 203854.902 | Koolance Peltier Circulator Fluid (-10 °C to 100 °C, pkg. of 4) |
| 206442.001 | Hioki LCR Meter IM3536Note: For use with Rheo-Impedance Spectroscopy Accessory (534855.901), or Dielectric Accessory (546601.901). |
| 250000.001 | HR x0, DHR & AR Rheometer Filter/Regulator |
| 250000.001 | Filter/Regulator |
| 250024.001 | Low Viscosity Standard Oil (S60) ~ 100 mPa.s (cP) @ 25 °C |
| 250024.002 | High Viscosity Standard Oil (S600) ~ 1100 mPa.s (cP) @ 25 °C |
| 270323.007 | High Temperature O-RingNote: For SST Double Gap Concentric Cylinder Cup. |
| 270323.008 | High Temperature O-RingNote: For SST Standard Concentric Cylider Cup with Cap. |
| 271902.001 | HR x0, DHR Double Wall Ring (DWR) Interfacial Exchange Cell Syringe Pump |
| 271904.001 | HR x0, DHR Rheo-Raman Objective 20X Long Working Distance |
| 271920.001 | DHR Rheo-Raman Optical Table |
| 272004.001 | HR x0, DHR Rheo-Raman Optical Table |
| 402046.901 | AutoPilot Option for TRIOS Software |
| 402491.901 | HR x0, DHR, ARES-G2, Stainless Steel, 20 mm, Quick Change Plate |
| 402492.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 20 mm,Quick Change Plate |
| 402493.901 | HR x0, DHR, ARES-G2, Hard Anodized Aluminum, 20 mm, Quick ChangePlate |
| 402494.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 20 mm,Quick Change Plate |
| 402611.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 8 mm, Quick Change DisposablePlate (pkg. of 20) |
| 402612.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 20 mm, Quick Change DisposablePlate (pkg. of 20) |
| 402613.901 | HR x0, DHR, ARES-G2, APS, Aluminum, 25 mm, Quick Change DisposablePlate (pkg. of 20) |
| 402622.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 50 mm, Quick Change Plate |
| 402623.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 40 mm, Quick Change Plate |
| 402624.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 25 mm, Quick Change Plate |
| 402625.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 8 mm, Quick Change Plate |
| 402627.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 8 mm,Quick Change Plate |
| 402628.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 25 mm,Quick Change Plate |
| 402629.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Cross Hatched, 40 mm,Quick Change Plate |
| 402630.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 25 mm,Quick Change Plate |
| 402631.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 40 mm,Quick Change Plate |
| 402632.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 50 mm,Quick Change Plate |
| 402633.901 | HR x0, DHR, ARES-G2, APS, Titanium, 25 mm, Quick Change Plate |
| 402634.901 | HR x0, DHR, ARES-G2, APS, Titanium, 50 mm, Quick Change Plate |
| 402681.901 | HR x0, DHR, ARES-G2, APS, Hard Anodized Aluminum, 42 mm Dia., 15 mmEdge Height, Immersion CupNote: Includes two removable sidewalls (one aluminum and one clearpolycarbonate) for easy sample loading and trimming. |
| 402751.901 | HR x0, DHR, ARES-G2, APS, Quick Change Disposable Plate Holder |
| 402751.902 | HR x0, DHR, ARES-G2, APS, Quick Change Plate Holder |
| 402769.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 40 mm,Quick Change Plate |
| 402770.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 25 mm,Quick Change Plate |
| 402811.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, Sandblasted, 8 mm,Quick Change Plate |
| 402815.901 | Vane RotorNote: For HR x0, DHR Pressure Cell – P/N: 533216.901. |
| 402817.901 | Vane rotor for HR x0, DHR & ARES-G2 High Sensitivity Pressure Cell (HSPC)Note: Requires HR x0, DHR or ARES-G2 High Sensitivity Pressure Cell -HR x0, DHR (P/N: 547050.901) or ARES-G2 (P/N: 402818.901). |
| 402828.901 | Starch RotorNote: For HR x0, DHR Pressure Cell – P/N: 533216.901. |
| 403056.901 | HR x0, DHR, ARES-G2 Replacement Clamps for EVA (pkg. of 4) |
| 403064.901 | 20 mm diameter Disposable Acrylic Plates (pkg. of 10)Note: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of HR x0/HR/AR-UV option. |
| 403153.001 | 20 mm Quartz Plate for HR x0/DHR/AR and ARES UV-Curing OptionNote: For use with the upper plate fixture of ARES-UV option and thelower plate fixture of HR x0/DHR/AR-UV option. |
| 403209.901 | Air Cooled Peltier Circulator (110/220VAC; 50/60Hz)Note: For use with HR x0, DHR, AR and ARES Rheometers. |
| 404140.901 | HR x0, DHR Standard Drum Pair Set for EVA |
| 404140.903 | HR x0, DHR Knurled Surface Drum Pair Set for EVA |
| 404140.905 | HR x0, DHR Roughened Surface Drum Pair Set for EVA |
| 404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) with fittings for rheometers For use with:1) HR x0, DHR, AR, and ARES-G2 Peltier Plate and Peltier Concentric Cylinder Systems.2) HR x0 and DHR UPP System.3) HR x0 Combined UHP and Peltier Manifold (P/N: 534059.901).4) DHR & AR UHP systems along with the Combined Manifold (P/N: 554104.901).NOT FOR USE WITH LASER FLASH, XENON FLASH, OR HEAT FLOW METER INSTRUMENTS. |
| 404500.901 | Peltier Circulator TCube Edge Model 5A (110/220VAC; 50/60Hz) with fittings for rheometers For use with:1) HR x0, DHR, AR, and ARES-G2 Peltier Plate and Peltier Concentric Cylinder Systems.2) HR x0 and DHR UPP System.3) HR x0 Combined UHP and Peltier Manifold (P/N: 534059.901).4) DHR & AR UHP systems along with the Combined Manifold (P/N: 554104.901).NOT FOR USE WITH LASER FLASH, XENON FLASH, OR HEAT FLOW METER INSTRUMENTS. |
| 405000.901 | ACS-3 Air Chiller System (240VAC/60 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. |
| 405000.902 | ACS-3 Air Chiller System (220-230VAC/50 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. |
| 405001.901 | ACS-2 Air Chiller System (240VAC/60 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. |
| 405001.902 | ACS-2 Air Chiller System (220-230VAC/50 Hz)Note: Requires HR x0, DHR ETC Air Chiller Panel (P/N: 405400.901) foroperation. |
| 405400.901 | HR x0, DHR ETC & DMA 850/ Q800 Combined Air Chiller PanelNote: For use with ACS-2 and ACS-3 Air Chiller Systems. |
| 500030.901 | Membrane Compressed Air Dryer |
| 511080.906 | DHR & AR-G2, Stainless Steel, 8 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 511120.906 | DHR & AR-G2, Stainless Steel, 12 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 511200.905 | DHR & AR-G2, Stainless Steel, 20 mm PlateNote: For use with DHR & AR-G2 only. |
| 511200.906 | DHR & AR-G2, Stainless Steel, 20 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 511203.905 | DHR & AR-G2, Stainless Steel, 20 mm, 0.5 deg ConeNote: For use with DHR & AR-G2 only. |
| 511204.905 | DHR & AR-G2, Stainless Steel, 20 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. |
| 511204.906 | DHR & AR-G2, Stainless Steel, 20 mm, 1 deg Cone, NSTNote: For use with DHR & AR-G2 only. |
| 511206.905 | DHR & AR-G2, Stainless Steel, 20 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 511206.906 | DHR & AR-G2, Stainless Steel, 20 mm, 2 deg Cone, NSTNote: For use with DHR & AR-G2 only. |
| 511207.905 | DHR & AR-G2, Stainless Steel, 20 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. |
| 511207.906 | DHR & AR-G2, Stainless Steel, 20 mm, 4 deg Cone, NSTNote: For use with DHR & AR-G2 only. |
| 511250.906 | DHR & AR-G2, Stainless Steel, 25 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 511400.905 | DHR & AR-G2, Stainless Steel, 40 mm PlateNote: For use with DHR & AR-G2 only. |
| 511403.905 | DHR & AR-G2, Stainless Steel, 40 mm, 0.5 deg ConeNote: For use with DHR & AR-G2 only. |
| 511404.905 | DHR & AR-G2, Stainless Steel, 40 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. |
| 511406.905 | DHR & AR-G2, Stainless Steel, 40 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 511407.905 | DHR & AR-G2, Stainless Steel, 40 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. |
| 511500.905 | DHR & AR-G2, Stainless Steel, 50 mm PlateNote: For use with DHR & AR-G2 only. |
| 511504.905 | DHR & AR-G2, Stainless Steel, 50 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. |
| 511506.905 | DHR & AR-G2, Stainless Steel, 50 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 511600.905 | DHR & AR-G2, Stainless Steel, 60 mm PlateNote: For use with DHR & AR-G2 only. |
| 511603.905 | DHR & AR-G2, Stainless Steel, 60 mm, 0.5 deg ConeNote: For use with DHR & AR-G2 only. |
| 511604.905 | DHR & AR-G2, Stainless Steel, 60 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. |
| 511606.905 | DHR & AR-G2, Stainless Steel, 60 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 511607.905 | DHR & AR-G2, Stainless Steel, 60 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. |
| 512080.906 | DHR & AR-G2, Stainless Steel, Composite HB, 8 mm, NSTNote: For use with DHR & AR-G2 only. |
| 512200.905 | DHR & AR-G2, Stainless Steel, Composite HB, 20 mmNote: For use with DHR & AR-G2 only. |
| 512200.906 | DHR & AR-G2, Stainless Steel, Composite HB, 20 mm, NSTNote: For use with DHR & AR-G2 only. |
| 512206.905 | DHR & AR-G2, Stainless Steel, Composite HB, 20 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 512206.906 | DHR & AR-G2, Stainless Steel, Composite HB, 20 mm, 2 deg Cone, NSTNote: For use with DHR & AR-G2 only. |
| 512250.906 | DHR & AR-G2, Stainless Steel, Composite HB, 25 mm, NSTNote: For use with DHR & AR-G2 only. |
| 512400.905 | DHR & AR-G2, Stainless Steel, Composite HB, 40 mmNote: For use with DHR & AR-G2 only. |
| 512406.905 | DHR & AR-G2, Stainless Steel, Composite HB, 40 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 512407.905 | DHR & AR-G2, Stainless Steel, Composite HB, 40 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. |
| 512600.905 | DHR & AR-G2, Stainless Steel, Composite HB, 60 mmNote: For use with DHR & AR-G2 only. |
| 512606.905 | DHR & AR-G2, Stainless Steel, Composite HB, 60 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 512607.905 | DHR & AR-G2, Stainless Steel, Composite HB, 60 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. |
| 513200.905 | DHR & AR-G2, HA Aluminum, 20 mm PlateNote: For use with DHR & AR-G2 only. |
| 513204.905 | DHR & AR-G2, HA Aluminum, 20 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. |
| 513206.905 | DHR & AR-G2, HA Aluminum, 20 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 513207.905 | DHR & AR-G2, HA Aluminum, 20 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. |
| 513400.905 | DHR & AR-G2, HA Aluminum, 40 mm PlateNote: For use with DHR & AR-G2 only. |
| 513404.905 | DHR & AR-G2, HA Aluminum, 40 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. |
| 513406.905 | DHR & AR-G2, HA Aluminum, 40 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 513407.905 | DHR & AR-G2, HA Aluminum, 40 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. |
| 513600.905 | DHR & AR-G2, HA Aluminum, 60 mm PlateNote: For use with DHR & AR-G2 only. |
| 513603.905 | DHR & AR-G2, HA Aluminum, 60 mm, 0.5 deg ConeNote: For use with DHR & AR-G2 only. |
| 513604.905 | DHR & AR-G2, HA Aluminum, 60 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. |
| 513606.905 | DHR & AR-G2, HA Aluminum, 60 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 513607.905 | DHR & AR-G2, HA Aluminum, 60 mm, 4 deg ConeNote: For use with DHR & AR-G2 only. |
| 517040.901 | Stainless Steel Cover Plate, Cross Hatched, 40 mm |
| 517060.901 | Stainless Steel Cover Plate, Cross Hatched, 60 mm |
| 517080.906 | DHR & AR-G2, Stainless Steel, Cross Hatched, 8 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 517105.901 | Insulated Solvent Trap Cover and Location Ring (for standard PeltierPlate)Note: NOT FOR USE WITH STEPPED PELTIER. |
| 517200.905 | DHR & AR-G2, Stainless Steel, Cross Hatched, 20 mm PlateNote: For use with DHR & AR-G2 only. |
| 517200.906 | DHR & AR-G2, Stainless Steel, Cross Hatched, 20 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 517400.905 | DHR & AR-G2, Stainless Steel, Cross Hatched, 40 mm PlateNote: For use with DHR & AR-G2 only. |
| 517600.905 | DHR & AR-G2, Stainless Steel, Cross Hatched, 60 mm PlateNote: For use with DHR & AR-G2 only. |
| 519080.906 | DHR & AR-G2, Stainless Steel, Sandblasted, 8 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 519200.905 | DHR & AR-G2, Stainless Steel, Sandblasted, 20 mm PlateNote: For use with DHR & AR-G2 only. |
| 519200.906 | DHR & AR-G2, Stainless Steel, Sandblasted, 20 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 519250.906 | DHR & AR-G2, Stainless Steel, Sandblasted, 25 mm Plate, NSTNote: For use with DHR & AR-G2 only. |
| 519400.905 | DHR & AR-G2, Stainless Steel, Sandblasted, 40 mm PlateNote: For use with DHR & AR-G2 only. |
| 519600.905 | DHR & AR-G2, Stainless Steel, Sandblasted, 60 mm PlateNote: For use with DHR & AR-G2 only. |
| 520400.905 | DHR & AR-G2, Titanium, 40 mm PlateNote: For use with DHR & AR-G2 only. |
| 520600.905 | DHR & AR-G2, Titanium, 60 mm PlateNote: For use with DHR & AR-G2 only. |
| 520604.905 | DHR & AR-G2, Titanium, 60 mm, 1 deg ConeNote: For use with DHR & AR-G2 only. |
| 520606.905 | DHR & AR-G2, Titanium, 60 mm, 2 deg ConeNote: For use with DHR & AR-G2 only. |
| 523080.937 | Aluminum, 8 mm Disposable Plates (pkg. of 20) |
| 523200.917 | Aluminum, 20 mm Disposable Plates (pkg. of 10) |
| 523250.927 | Aluminum, 25 mm Disposable Plates (pkg. of 100) |
| 523250.928 | Aluminum, 25 mm Disposable Plates (with Drip Channel) (pkg. of 100) |
| 523250.937 | Aluminum, 25 mm Disposable Plates (pkg. of 20) |
| 523250.938 | Aluminum, 25 mm Disposable Plates (with Drip Channel) (pkg. of 20)Note: Required for EHP and UHP upper and lower systems. |
| 523400.907 | Aluminum, 40 mm Disposable Plate |
| 523400.927 | Aluminum, 40 mm Disposable Plates (pkg. of 100) |
| 523400.937 | Aluminum, 40 mm Disposable Plates (pkg. of 20) |
| 526080.904 | HA Aluminum, 8 mm Stepped Lower ETC Plate (2 required) |
| 526250.903 | HA Aluminum, 25 mm Non-Stepped Upper ETC PlateNote: For use with P/N: 526250.904 – HA AL, 25 mm Stepped Lower ETC Plate. |
| 526250.904 | HA Aluminum, 25 mm Stepped Lower ETC PlateNote: For use with P/N: 526250.903 – HA AL, 25 mm Non-Stepped Upper ETC Plate. |
| 526253.903 | Aluminum, 25 mm, 0.5 deg Cone for ETC |
| 526256.903 | Aluminum, 25 mm, 2 deg Cone for ETC |
| 526257.903 | Aluminum, 25 mm, 4 deg Cone for ETC |
| 526400.903 | HA Aluminum, 40 mm ETC Plate, use for upper and lower (2 required) |
| 527040.904 | Stainless Steel, 4 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use two of this partnumber if using upper screwed shaft. |
| 527080.904 | Stainless Steel, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use two of this partnumber if using upper screwed shaft. |
| 527080.906 | Stainless Steel, Cross Hatched, 8 mm Stepped Lower ETC PlateNote: For use with single piece upper geometry – P/N: 543640.901. |
| 527080.937 | Stainless Steel, 8 mm Disposable Plates (pkg. of 20) |
| 527250.903 | Stainless Steel, 25 mm Non-Stepped Upper ETC PlateNote: For use with lower screw-in plate – P/N: 527250.904. |
| 527250.904 | Stainless Steel, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use with upper screw-inplate (P/N: 527250.903) and upper screwed shaft. |
| 527250.905 | Stainless Steel, Cross Hatched, 25 mm Non-Stepped Upper ETC PlateNote: For use with lower screw-in plate – P/N: 527250.906. |
| 527250.906 | Stainless Steel, Cross Hatched, 25 mm Stepped Lower ETC PlateNote: For use with single piece upper shaft/geometries, or use with upper screw-inplate (P/N: 527250.905) if using upper screwed shaft. |
| 527250.937 | Stainless Steel, 25 mm Disposable Plates (pkg. of 20) |
| 527250.938 | Stainless Steel, 25 mm Disposable Plates (with Drip Channel) (pkg. of 20)Note: Required for EHP and UHP upper and lower systems. |
| 527400.903 | Stainless Steel, 40 mm ETC Plate, use for upper and lowerNote: For use with single piece upper shaft (P/N: 543331.001), or two requiredif used with upper screwed shaft. |
| 527400.905 | Stainless Steel, Cross Hatched 40 mm ETC PlateNote: For use with upper and lower – (use with single piece upper shaft/geometries, or use two of this part number if using upper screwed shaft). |
| 527400.937 | Stainless Steel, 40 mm Disposable Plates (pkg. of 20) |
| 529612.901 | Purge Gas Cover and Location Ring for Standard Peltier Plate |
| 529613.901 | Hard Anodized Split Solvent Trap Cover and Location Ring for StandardPeltier Plate |
| 529750.901 | 25 mm Plate Insulating Thermal Cover for Peltier Plate |
| 530021.001 | HR x0, DHR & AR-G2, PT-IR Du Nouy Ring Geometry for Dynamic InterfacialSystemNote: Replacement ring – does NOT include geometry holder. |
| 531035.901 | Insulated Solvent Trap for Advanced Peltier PlateNote: Includes Solvent Trap Cover and Location Ring. |
| 531038.901 | Purge Gas Cover for Advanced Peltier Plate |
| 531056.901 | HR x0, DHR & AR-Series Blank Smart Swap Base |
| 531070.901 | Hard Anodized Aluminum Solvent Trap for Advanced Peltier Plate |
| 531336.901 | DHR & AR-G2 to AR2000ex Tribo-Rheometry Geometry Adapter Sleeve |
| 532066.901 | AR-XXXX to HR x0, DHR & AR-G2 Geometry Adapter KitNote: For use only with standard Peltier Plate geometries. |
| 532067.901 | HR x0, DHR & AR-Rheometer Vibration Isolation Pads |
| 532080.901 | HR x0, DHR, ARES-G2, APS, Tribo-Rheometry Lower Geometry Holder |
| 533201.901 | HR x0, DHR Smart Swap Concentric Cylinder Peltier JacketNote: Does not include cup or rotor. Includes cover. |
| 533206.901 | DHR Electrically Heated Plate SystemNote: Max Temperature = 400 °C. Includes 25 mm stainless steel plates. |
| 533207.901 | DHR Electrically Heated Disposable Plate SystemNote: Max Temperature = 400 °C. Includes five sets of 25 mm dripchannel disposable plates. |
| 533208.901 | HR x0, DHR ETC Oven Camera Viewer Option |
| 533209.901 | HR x0, DHR Smart Swap Advanced Peltier Plate |
| 533210.901 | HR x0, DHR Smart Swap Peltier PlateNote: Temperature Range = 200 °C. |
| 533211.901 | HR x0, DHR Stepped Peltier with Screw-in PlateNote: Temperature Range = 200 °C. |
| 533212.901 | HR x0, DHR Smart Swap Disposable Stepped Peltier PlateNote: Temperature Range = 200 °C.DHR requires Disposable Plate Shaft (P/N: 546320.901).HR x0 requires Disposable Plate Shaft (P/N: 546320.941). |
| 533216.901 | HR x0, DHR Pressure Cell High TempNote: Requires Smart Swap Peltier Concentric Cylinder Jacket (P/N:533201.901) or Smart Swap Electrically Heated Concentric Cylinder (P/N:547310.901). |
| 533217.901 | HR x0, DHR-3 & DHR-2, 365 nm LED UV-Curing Accessory |
| 533218.901 | HR x0, DHR-3 & DHR-2, 455 nm LED Blue Light Curing Accessory |
| 533222.901 | HR 30, HR 20, DHR-3, DHR-2 SALS Accessory |
| 533231.901 | AR to HR x0, DHR Quick-Connect Plumbing AdapterNote: Required for using existing accessories on a HR x0, DHR instrument(includes 2 large male fittings). |
| 533235.901 | DHR Manifold Mounting Adapter |
| 533240.901 | DHR Peltier Plate Draft Shield |
| 533242.901 | Tribo-Rheometry Accessory Base Kit |
| 533246.901 | HR x0, DHR & AR-G2, Stainless Steel Building Materials Cell Cup withSlotted Cage |
| 533247.901 | HR x0, DHR & AR-G2, Stainless Steel Building Materials Cell Paddle |
| 533249.901 | Tribo-Rheometry, 5/16” Truncated SST Balls (pkg. of 12) |
| 533250.901 | Tribo-Rheometry, 1/2” SST Balls (pkg. of 25) |
| 533264.901 | HR x0, DHR & AR-G2, Replacement Stainless Steel Building Materials CellSlotted CageNote: For use with P/N: 533246.901 (Stainless Steel Building Materials Cell Cup with Slotted Cage). |
| 533273.901 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Medium |
| 533273.902 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Short |
| 533273.903 | Tribo-Rheometry, Single Ball Upper Geometry Holder, Long |
| 533274.901 | Tribo-Rheometry, Ball on 3 Balls Lower Geometry |
| 533279.901 | HR x0, DHR & AR-G2, Tribo-Rheometry Coupling Adapter, Short |
| 533279.902 | HR x0, DHR & AR-G2, Tribo-Rheometry Coupling Adapter, Long |
| 533281.901 | Tribo-Rheometry, SST Cup 45 mm Lower Geometry (pkg. of 2) |
| 533282.901 | Tribo-Rheometry, 3 Plates Lower Geometry |
| 533283.901 | Tribo-Rheometry, Ring on Plate Upper Geometry Holder |
| 533284.901 | Tribo-Rheometry, Ring Upper Geometry (pkg. of 3) |
| 533290.901 | Tribo-Rheometry, 3 Balls on Plate Upper Geometry Holder |
| 533291.901 | Tribo-Rheometry, Ball on 3 Plates SST Test Plates (pkg. of 30) |
| 533300.901 | HR x0, DHR & AR-G2, ETC, Tribo-Rheometry Lower Geometry Holder |
| 533405.901 | HR x0, DHR UHP CoverNote: For UV Curing Accessories. |
| 533501.901 | DHR Environmental Test Chamber (ETC)Note: Maximum Temperature = 600 °C. |
| 533601.901 | HR x0, DHR Double Wall Ring (DWR) Interfacial Exchange Cell |
| 533604.901 | DHR Electro-Rheology Shield and Safety Interlock Kit |
| 533611.901 | Rheo-Raman Accessory Replacement Glass Plates and O-rings |
| 533613.901 | HR 30, HR 20, DHR Rheo-Raman AccessoryNote: Requires iXR Raman Spectrometer, sold separately.Also requires the following:1. Upper Heated Plate (P/N: 545803.901) for DHRor (P/N: 534063.901) for HR x02. Appropriate UTS-compatible upper geometry,Rheo-Raman microscope objective (P/N: 271904.001),and Rheo-Raman optical table (P/N: 271920.001) for DHRor (272004.001) for HR x0.Requires service engineer installation quoted separately. |
| 533624.901 | Interfacial Exchange Cell Replacement Tubing and Syringes |
| 533890.901 | HR 30, HR 20, DHR 3-Point Bending Clamp Accessory Kit |
| 533892.901 | HR 30, HR 20, DHR Cantilever Bending Clamp Accessory Kit |
| 533894.901 | HR 30, HR 20, DHR Film/Fiber Tension Accessory Kit |
| 534051.901 | DHR, Upper Peltier Plate System |
| 534052.901 | UPP Solvent Reservoir for Standard Peltier Plate |
| 534053.901 | UPP Solvent Reservoir for Advanced Peltier Plate |
| 534054.901 | UPP Low Temperature Accessory KitNote: Includes fittings, specially formulated HR-30 pottasium formate low temperature circulation fluid and insulation for tubing. |
| 534515.901 | DHR, Stainless Steel, 8 mm, Upper Peltier UTS Plate |
| 534516.901 | DHR, Stainless Steel, 25 mm, Upper Peltier UTS Plate |
| 534517.901 | DHR, Stainless Steel, 40 mm, Upper Peltier UTS Plate |
| 534518.901 | DHR, Stainless Steel, 40 mm, 2 deg, Upper Peltier UTS Cone |
| 534519.901 | DHR, Stainless Steel, 20 mm, Upper Peltier UTS Plate |
| 534525.901 | DHR Smart Swap 2 UPP Disposable Upper Geometry with Heat SpreaderNote: Requires Upper Temperature Sensor Draw Rod (P/N: 534585.901) for UPP disposable/screw-in geometry. |
| 534538.001 | 6 mm Sample Trimming Too |
| 534539.001 | 3 mm Sample Trimming Tool |
| 534540.901 | DHR Smart Swap 2 UPP Screw-in Upper Geometry with Heat SpreaderNote: Requires Upper Temperature Sensor Draw Rod (P/N: 534585.901) for UPP disposable/screw-in geometry. |
| 534555.901 | HR x0, DHR Smart Swap High temperature Advanced Peltier Plate |
| 534570.901 | DHR Upper Peltier Plate Dry Asphalt Kit |
| 534580.901 | HR x0 Upper Peltier Plate Disposable Plate Kit |
| 534585.901 | HR x0 & DHR, Upper Temperature Sensor Draw Rod for use with the Upper Peltier Plate disposable/screw-in geometries Note: For use with UPP only. Requires UPP Screw-in or Disposable Upper geometry with Heat Spreader. |
| 534585.901 | HR x0 & DHR, Upper Temperature Sensor Draw Rod for use with the Upper Peltier Plate disposable/screw-in geometries Note: For use with UPP only.Requires UPP Screw-in or Disposable Upper geometry with Heat Spreader. |
| 534590.901 | HR x0, DHR UPP CoverNote: For UV Curing Accessories. |
| 534595.901 | HR x0, DHR, ARES-G2, APS, Stainless Steel, 4 mm, Quick Change Plate |